10:48:20 - Starting task "Configure modules"
10:48:20 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/utils/branches/v5.5.1-40061 
10:48:20 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/libNectarCam/branches/v5.5.1-40061 
10:48:20 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/libQNectarCam/branches/v5.5.1-40061 
10:48:20 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/qNectarcamModuleController/branches/v5.5.1-40061
10:48:20 - Configuring modules with configuration /data/config/2021/20210325/config_tower_2modules_FEBv6_pingpong_DelayBusy4_nd681.NMC.xml
10:48:20 - Switching off high voltages in configuration
10:48:23 - Successfully configured 2 module(s)
10:48:24 - Checking for high voltage locked pixels...
10:48:24 - All front-end boards are programmed with firmware 61210216
10:48:24 - All backplanes are programmed with firmware 15
10:48:25 - NMC is in state NmcState.Configured and knows of 2 drawer(s)
10:48:25 - Found 0 PPS errors.
10:48:25 - Finished task "Configure modules"
10:48:26 - Starting task "Switch HVPA voltage state"
10:48:26 - Setting HVPA current limit to 12489.75 uA
10:48:27 - Setting HVPA ramp speed to 25 V/s
10:48:27 - Switching HVPA to state Nominal
10:48:29 - Starting NMC
10:48:29 - Clearing PPS error counters
10:48:34 - Setting HVPA current limits...
10:48:35 - Finished task "Switch HVPA voltage state"
10:48:37 - Starting task "Check high voltages"
10:48:37 - Found 2 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
10:48:38 - Actual voltage is between 984.54 V and 1117.52 V.
10:48:38 - Low voltages range between 300.00 V and 300.00 V. 
10:48:38 - Reference voltages range between 984.98 V and 1117.51 V. 
10:48:39 - Maximum difference between expected and actual voltages is 0.45 V
10:48:39 - Maximum of current limits is 4840.96 uA
10:48:39 - Checking status of HVPA module in 2 drawer(s)...
10:48:39 - Checking status of HVPA channels in 2 drawer(s)...
10:48:39 - HV is stabilized in all channels.
10:48:39 - Checking reference and low voltages against /data/config/2021/20210325/config_tower_2modules_FEBv6_pingpong_DelayBusy4_nd681.NMC.xml
10:48:40 - Calling method FSM.gotoObserving in object FSM
10:48:40 - Done
10:48:40 - Finished task "Check high voltages"
10:48:54 - Checking for high voltage locked pixels...
10:48:57 - Configuring calibration box...
10:48:57 - Configuring calibration box with leds=0x0 voltage=8.00 frequency=300.0/30 central_current=0.0 duration=0 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=True enabled=True
10:48:59 - Checking UCTS clock...
10:48:59 - UCTS clock is late by 11 seconds!
10:48:59 - Configuring UCTS
10:49:00 - Configuring TIB...
10:49:00 - Setting TIB forced mode to False
10:49:00 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
10:49:00 - Status: TibState.PpsStopped
10:49:00 - Alarms: AlarmVector.NoAlarm
10:49:00 - Connection status: False TXclient_alive: False
10:49:00 - Entering set_external_delay
10:49:00 - Setting ExternalDelayLocal to 27.000 ns
10:49:00 - Writing 27.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
10:49:00 - Entering set_external_delay
10:49:00 - Setting ExternalDelayCalibration to 58.000 ns
10:49:00 - Writing 58.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
10:49:00 - Entering set_external_delay
10:49:00 - Setting ExternalDelaySphe to 150.000 ns
10:49:00 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
10:49:00 - Setting TIB trigger mode to 0x54 = TriggerMask.SlowControl|Software|Calibration
10:49:00 - Writing 84 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
10:49:00 - Writing 1 to Camera.TIB.InputsEnable.InputMask.InputMask_v
10:49:00 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
10:49:00 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
10:49:00 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
10:49:00 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
10:49:00 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
10:49:00 - Status: TibState.PpsStopped
10:49:00 - Alarms: AlarmVector.NoAlarm
10:49:00 - Connection status: False TXclient_alive: False
10:49:00 - Writing False to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
10:49:00 - Writing 100 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
10:49:00 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
10:49:00 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
10:49:00 - Writing 100 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
10:49:00 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
10:49:00 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
10:49:00 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
10:49:00 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
10:49:00 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
10:49:01 - Connecting TIB to camera server at 10.10.4.12:222
10:49:01 - Starting TIB...
10:49:01 - Status: TibState.PpsStopped
10:49:01 - Alarms: AlarmVector.NoAlarm
10:49:01 - Connection status: False TXclient_alive: True
10:49:01 - Resetting run
10:49:01 - Wait for UCTS external trigger before enabling trigger...
10:49:01 - Status: TibState.Standby
10:49:01 - Alarms: AlarmVector.NoAlarm
10:49:01 - Connection status: False TXclient_alive: True
10:49:01 - Status: TibState.Standby
10:49:01 - Alarms: AlarmVector.NoAlarm
10:49:01 - Connection status: False TXclient_alive: True
10:49:02 - Status: TibState.Armed
10:49:02 - Alarms: AlarmVector.NoAlarm
10:49:02 - Connection status: True TXclient_alive: True
10:49:03 - Starting TIB triggers...
10:49:03 - Enabling trigger
10:49:03 - Status: TibState.Running
10:49:03 - Alarms: AlarmVector.NoAlarm
10:49:03 - Connection status: True TXclient_alive: True
10:49:05 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
10:49:05 - Alarms: AlarmVector.NoAlarm
10:49:05 - Temperature: 35.19
10:49:05 - Local camera rate: 0.0 Hz
10:49:05 - Stereo trigger rate: 0.0 Hz
10:49:05 - SPE trigger rate: 0.0 Hz
10:49:05 - Calibration trigger rate: 8463.0 Hz
10:49:05 - Software trigger rate: 0.0 Hz
10:49:05 - Pedestal trigger rate: 0.0 Hz
10:49:05 - Collected trigger rate: 8414.0 Hz
10:49:05 - Busy rate: 53.0 Hz
10:49:05 - Camera trigger rate: 8361.0 Hz
10:49:24 - Checking for high voltage locked pixels...
10:49:29 - Stopping TIB...
10:49:29 - Status: TibState.Running
10:49:29 - Alarms: AlarmVector.NoAlarm
10:49:29 - Connection status: True TXclient_alive: True
10:49:29 - Disabling trigger
10:49:29 - Disabling PPS
10:49:30 - Status: TibState.PpsStopped
10:49:30 - Alarms: AlarmVector.NoAlarm
10:49:30 - Connection status: True TXclient_alive: True
10:49:30 - Closing TIB connection to camera server
10:49:31 - Status: TibState.PpsStopped
10:49:31 - Alarms: AlarmVector.NoAlarm
10:49:31 - Connection status: False TXclient_alive: False
10:49:31 - Run duration: 0:00:26
10:49:31 - Local camera triggers: 0
10:49:31 - Slow control triggers: 0
10:49:31 - Single photo-electron triggers: 0
10:49:31 - Calibration triggers: 217173
10:49:31 - Software triggers from UCTS: 0
10:49:31 - Pedestal triggers: 0
10:49:31 - Collected input triggers: 214412
10:49:31 - Busy triggers: 1051
10:49:31 - Camera event triggers sent to clusters: 213361
10:49:33 - Calling method FSM.gotoReady in object FSM
10:49:35 - Stopping NMC
10:49:35 - Found 0 PPS errors.