14:57:46 - Starting task "Configure modules"
14:57:46 - Setting L0 thresholds to 5.0 p.e. per pixel using L0 slopes and offsets in /data/luts/l0_threshold_slope_and_offset_feb_20200708.h5
14:57:46 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/utils/branches/v5.5.1-40061 
14:57:46 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/libNectarCam/branches/v5.5.1-40061 
14:57:46 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/libQNectarCam/branches/v5.5.1-40061 
14:57:46 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/qNectarcamModuleController/branches/v5.5.1-40061
14:57:46 - Configuring modules with configuration /data/config/2020/20201208/config_2020-12-08_14-57-46.NMC.xml
14:57:46 - Switching off high voltages in configuration
14:57:50 - Successfully configured 3 module(s)
14:57:50 - All front-end boards are programmed with firmware F55D2001
14:57:50 - All backplanes are programmed with firmware 15
14:57:51 - NMC is in state NmcState.Configured and knows of 3 drawer(s)
14:57:51 - Found 0 PPS errors.
14:57:51 - Finished task "Configure modules"
14:57:58 - Starting task "Switch HVPA voltage state"
14:57:58 - Setting HVPA current limit to 12489.75 uA
14:57:59 - Setting HVPA ramp speed to 25 V/s
14:58:00 - Switching HVPA to state Nominal
14:58:05 - High voltage locked channels will be checked every 30 s
14:58:07 - Setting HVPA current limits...
14:58:08 - Finished task "Switch HVPA voltage state"
14:58:13 - Updating FEB temperature widget...
14:58:19 - Updating voltage widget...
14:58:26 - Updating voltage widget...
14:58:33 - Stopping flashes...
14:58:36 - Checking for high voltage locked pixels...
14:58:36 - Module 170 has 1 pixel(s) locked (HVPA status of 0x7e)!
14:58:36 - Unlocking 1 channel(s)...
14:58:36 - Resetting HVPA channel 0 of drawer 170...
14:58:39 - Updating voltage widget...
14:58:52 - Updating voltage widget...
14:58:54 - Updating voltage widget...
14:59:06 - Checking for high voltage locked pixels...
14:59:06 - Module 170 has 1 pixel(s) locked (HVPA status of 0x7e)!
14:59:06 - Unlocking 1 channel(s)...
14:59:06 - Resetting HVPA channel 0 of drawer 170...
14:59:11 - Updating voltage widget...
14:59:24 - Updating voltage widget...
14:59:36 - Checking for high voltage locked pixels...
14:59:38 - Updating voltage widget...
14:59:47 - Starting task "Check high voltages"
14:59:47 - Found 3 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
14:59:47 - Actual voltage is between 973.56 V and 1082.75 V.
14:59:47 - Low voltages range between 300.00 V and 300.00 V. 
14:59:48 - Reference voltages range between 973.67 V and 1082.65 V. 
14:59:49 - Maximum difference between expected and actual voltages is 0.71 V
14:59:49 - Maximum of current limits is 5262.16 uA
14:59:49 - Checking status of HVPA module in 3 drawer(s)...
14:59:49 - Checking status of HVPA channels in 3 drawer(s)...
14:59:50 - HV is stabilized in all channels.
14:59:50 - Checking reference and low voltages against /data/config/2020/20201208/config_tower_3modules.NMC.xml
14:59:50 - Done
14:59:50 - Finished task "Check high voltages"
14:59:52 - Starting NMC
14:59:52 - Clearing PPS error counters
15:00:03 - Calling method FSM.gotoObserving in object FSM
15:00:06 - Checking for high voltage locked pixels...
15:00:36 - Checking for high voltage locked pixels...
15:00:40 - Configuring calibration box...
15:00:40 - Configuring calibration box with leds=0x40 voltage=13.98 frequency=1000.0/1 central_current=0.0 duration=0 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=False enabled=False
15:00:41 - Starting flashes...
15:00:48 - Checking UCTS clock...
15:00:48 - UCTS and control PC clocks differ by 2.9 seconds
15:00:48 - Configuring UCTS
15:00:49 - Configuring TIB...
15:00:49 - Setting TIB forced mode to False
15:00:49 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
15:00:49 - Status: TibState.PpsStopped
15:00:49 - Alarms: AlarmVector.ReadError
15:00:49 - Connection status: False TXclient_alive: False
15:00:49 - Entering set_external_delay
15:00:49 - Setting ExternalDelayLocal to 0.000 ns
15:00:49 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
15:00:49 - Entering set_external_delay
15:00:49 - Setting ExternalDelayCalibration to 65.000 ns
15:00:49 - Writing 65.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
15:00:49 - Entering set_external_delay
15:00:49 - Setting ExternalDelaySphe to 150.000 ns
15:00:49 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
15:00:49 - Setting TIB trigger mode to 0x75 = TriggerMask.SlowControl|Pedestal|Software|Calibration|Mono
15:00:49 - Writing 117 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
15:00:49 - Writing 1 to Camera.TIB.InputsEnable.InputMask.InputMask_v
15:00:49 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
15:00:49 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
15:00:49 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
15:00:49 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
15:00:49 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
15:00:49 - Status: TibState.PpsStopped
15:00:49 - Alarms: AlarmVector.ReadError
15:00:49 - Connection status: False TXclient_alive: False
15:00:49 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
15:00:49 - Writing 100 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
15:00:49 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
15:00:49 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
15:00:49 - Writing 100 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
15:00:49 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
15:00:49 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
15:00:49 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
15:00:49 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
15:00:49 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
15:00:53 - Connecting TIB to camera server at 10.10.4.12:222
15:00:53 - Starting TIB...
15:00:53 - Status: TibState.PpsStopped
15:00:53 - Alarms: AlarmVector.ReadError
15:00:53 - Connection status: False TXclient_alive: True
15:00:53 - Resetting run
15:00:53 - Wait for UCTS external trigger before enabling trigger...
15:00:53 - Status: TibState.Standby
15:00:53 - Alarms: AlarmVector.NoAlarm
15:00:53 - Connection status: False TXclient_alive: True
15:00:53 - Status: TibState.Standby
15:00:53 - Alarms: AlarmVector.NoAlarm
15:00:53 - Connection status: False TXclient_alive: True
15:00:54 - Status: TibState.Armed
15:00:54 - Alarms: AlarmVector.NoAlarm
15:00:54 - Connection status: True TXclient_alive: True
15:00:57 - Starting TIB triggers...
15:00:57 - Enabling trigger
15:00:57 - Status: TibState.Running
15:00:57 - Alarms: AlarmVector.ReadError
15:00:57 - Connection status: True TXclient_alive: True
15:00:58 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
15:00:58 - Alarms: AlarmVector.ReadError
15:00:58 - Temperature: 36.62
15:00:59 - Local camera rate: 999.0 Hz
15:00:59 - Stereo trigger rate: 0.0 Hz
15:00:59 - SPE trigger rate: 0.0 Hz
15:00:59 - Calibration trigger rate: 999.0 Hz
15:00:59 - Software trigger rate: 0.0 Hz
15:00:59 - Pedestal trigger rate: 100.0 Hz
15:00:59 - Collected trigger rate: 1096.0 Hz
15:00:59 - Busy rate: 47.0 Hz
15:00:59 - Camera trigger rate: 1049.0 Hz
15:01:02 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
15:01:02 - Alarms: AlarmVector.ReadError
15:01:02 - Temperature: 36.56
15:01:02 - Local camera rate: 1000.0 Hz
15:01:02 - Stereo trigger rate: 0.0 Hz
15:01:02 - SPE trigger rate: 0.0 Hz
15:01:02 - Calibration trigger rate: 1000.0 Hz
15:01:02 - Software trigger rate: 0.0 Hz
15:01:02 - Pedestal trigger rate: 100.0 Hz
15:01:02 - Collected trigger rate: 1100.0 Hz
15:01:02 - Busy rate: 0.0 Hz
15:01:02 - Camera trigger rate: 1100.0 Hz
15:01:06 - Checking for high voltage locked pixels...
15:01:36 - Checking for high voltage locked pixels...
15:02:06 - Checking for high voltage locked pixels...
15:02:36 - Checking for high voltage locked pixels...
15:03:06 - Checking for high voltage locked pixels...
15:03:24 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
15:03:24 - Alarms: AlarmVector.ReadError
15:03:25 - Temperature: 36.69
15:03:25 - Local camera rate: 1000.0 Hz
15:03:25 - Stereo trigger rate: 0.0 Hz
15:03:25 - SPE trigger rate: 0.0 Hz
15:03:25 - Calibration trigger rate: 1000.0 Hz
15:03:25 - Software trigger rate: 0.0 Hz
15:03:25 - Pedestal trigger rate: 100.0 Hz
15:03:25 - Collected trigger rate: 1100.0 Hz
15:03:25 - Busy rate: 0.0 Hz
15:03:25 - Camera trigger rate: 1100.0 Hz
15:03:36 - Checking for high voltage locked pixels...
15:04:03 - Stopping TIB...
15:04:03 - Status: TibState.Running
15:04:03 - Alarms: AlarmVector.ReadError
15:04:03 - Connection status: True TXclient_alive: True
15:04:03 - Disabling trigger
15:04:03 - Disabling PPS
15:04:04 - Status: TibState.PpsStopped
15:04:04 - Alarms: AlarmVector.ReadError
15:04:05 - Connection status: True TXclient_alive: True
15:04:05 - Closing TIB connection to camera server
15:04:05 - Status: TibState.PpsStopped
15:04:05 - Alarms: AlarmVector.ReadError
15:04:05 - Connection status: False TXclient_alive: False
15:04:05 - Run duration: 0:03:09
15:04:05 - Local camera triggers: 188209
15:04:05 - Slow control triggers: 0
15:04:05 - Single photo-electron triggers: 0
15:04:05 - Calibration triggers: 188204
15:04:05 - Software triggers from UCTS: 0
15:04:05 - Pedestal triggers: 18821
15:04:05 - Collected input triggers: 205218
15:04:05 - Busy triggers: 283
15:04:05 - Camera event triggers sent to clusters: 204935
15:04:06 - Checking for high voltage locked pixels...
15:04:08 - Calling method FSM.gotoReady in object FSM
15:04:11 - Stopping NMC
15:04:12 - Found 0 PPS errors.
15:04:14 - Resetting NMC