14:06:52 - ECC is in state EccState.Safe with status EccStatus.NoError
14:06:52 - Average temperature: 19.2 deg C
14:06:52 - Air temperature (T1-T6 and T9-T10): 19.2, 1255.0, -838.0, -838.0, 1254.0, 1254.0, 1254.0, 1253.0 deg C
14:06:52 - Air differential pressure: 0.0 Pa
14:06:52 - Water temperature (T11-T12): 1253.0, -838.0 deg C
14:06:52 - Back doors are closed.
14:06:52 - Shutter is in state PartiallyOpen (error 0)
14:06:52 - Light sensors: [1.64, 1.94, 2.24, 2.5] V
14:06:52 - Humidity: 0.0 %. Water pressure: [0.0, 0.0] bar.
14:06:52 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
14:06:52 - 24 V power supply no. 1 is disabled with a current of 6.370 A.
14:06:54 - Exceeded 15.0 s timeout while waiting for ECC to be ready!
14:06:54 - Finished task "Prepare ECC"
14:06:59 - Switching ECC back to Safe state...
14:06:59 - Powering off modules...
14:06:59 - Executing command '/opt/cta/bin/cta_ctrl --all --power_off' on Digital Trigger Crate at 10.10.4.57
14:07:01 - Setting ECC mode to EccTransition.Safe
14:07:05 - Halting ECC!
14:07:05 - Setting ECC mode to EccTransition.Halt
14:07:06 - Received ECC state change notification: EccState.Safe
14:07:32 - Updating voltage widget...
14:08:39 - Received ECC state change notification: EccState.Safe
14:08:44 - Received ECC state change notification: EccState.Safe
14:16:19 - ECC is in state EccState.Safe with status EccStatus.NoError
14:16:19 - Average temperature: 18.8 deg C
14:16:19 - Air temperature (T1-T6 and T9-T10): 18.8, 1255.0, -838.0, -838.0, 1254.0, -838.0, -838.0, 1253.0 deg C
14:16:19 - Air differential pressure: 0.0 Pa
14:16:19 - Water temperature (T11-T12): 1253.0, -838.0 deg C
14:16:19 - Back doors are closed.
14:16:19 - Shutter is in state PartiallyOpen (error 0)
14:16:19 - Light sensors: [1.56, 1.86, 2.13, 2.38] V
14:16:19 - Humidity: 0.0 %. Water pressure: [0.0, 0.0] bar.
14:16:19 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
14:16:19 - 24 V power supply no. 1 is disabled with a current of 6.400 A.
14:16:23 - Starting task "Prepare ECC"
14:16:23 - Preparing ECC...
14:16:23 - Setting ECC temperature range for Ready state to [16.000000, 36.000000]
14:16:23 - Setting ECC mode to EccTransition.Ready
14:16:24 - Received ECC state change notification: EccState.Safe
14:16:29 - Received ECC state change notification: EccState.Ready
14:16:29 - Received ECC state change notification: EccState.Ready
14:16:29 - Received ECC state change notification: EccState.Ready
14:16:30 - Setting power supply box SPE relay to True
14:16:30 - Finished task "Prepare ECC"
14:20:18 - Status: TibState.RunStopped
14:20:18 - Alarms: AlarmVector.BufferFull
14:20:18 - Connection status: False TXclient_alive: False
14:20:18 - External delays: Local=3825.000 ns, Calibration=3825.000 ns, Sphe=3825.000 ns
14:20:18 - Trigger mask: 0x51 = TriggerMask.SlowControl|Software|Mono
14:20:18 - Input mask: 0x7
14:20:18 - Disable BUSY: False
14:20:18 - Extra BUSY Delay: 0.0
14:20:18 - Temperature: 25.06
14:20:21 - Status: TibState.RunStopped ConnectionStatus: False TXclient_alive: False
14:20:21 - Alarms: AlarmVector.BufferFull
14:20:21 - Temperature: 25.06
14:20:21 - Local camera rate: 0.0 Hz
14:20:21 - Stereo trigger rate: 0.0 Hz
14:20:21 - SPE trigger rate: 0.0 Hz
14:20:21 - Calibration trigger rate: 14987.0 Hz
14:20:21 - Software trigger rate: 0.0 Hz
14:20:21 - Pedestal trigger rate: 0.0 Hz
14:20:21 - Collected trigger rate: 0.0 Hz
14:20:21 - Busy rate: 0.0 Hz
14:20:21 - Camera trigger rate: 0.0 Hz
14:23:44 - Module 84 is connected to channel 12 of DTC slot 19
14:23:46 - Starting task "Powering modules..."
14:23:46 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 12 --power_on' on Digital Trigger Crate at 10.10.4.57
14:23:48 - Finished task "Powering modules..."
14:23:50 - Module 85 is connected to channel 15 of DTC slot 19
14:23:52 - Starting task "Powering modules..."
14:23:52 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 15 --power_on' on Digital Trigger Crate at 10.10.4.57
14:23:54 - Finished task "Powering modules..."
14:24:14 - Starting task "Configure modules"
14:24:14 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/utils/branches/v5.5.1-40061 
14:24:14 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/libNectarCam/branches/v5.5.1-40061 
14:24:14 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/libQNectarCam/branches/v5.5.1-40061 
14:24:14 - Version of NMC: svn+ssh://svn.in2p3.fr/cta/MST/NectarCAM/qNectarcamModuleController/branches/v5.5.1-40061
14:24:14 - Configuring modules with configuration /data/config/2020/20201130/config_tower_2modules_FEBv6_pingpong_newDacl_DelayBusy15.NMC.xml
14:24:14 - Switching off high voltages in configuration
14:24:17 - Successfully configured 2 module(s)
14:24:18 - All front-end boards are programmed with firmware 61201117
14:24:18 - All backplanes are programmed with firmware 15
14:24:19 - NMC is in state NmcState.Configured and knows of 2 drawer(s)
14:24:19 - Found 0 PPS errors.
14:24:19 - Finished task "Configure modules"
14:24:25 - Starting NMC
14:24:25 - Clearing PPS error counters
14:24:29 - Calling method FSM.gotoReady in object FSM
14:24:46 - Calling method FSM.gotoObserving in object FSM
14:26:53 - Status: TibState.RunStopped ConnectionStatus: False TXclient_alive: False
14:26:53 - Alarms: AlarmVector.BufferFull
14:26:53 - Temperature: 28.75
14:26:53 - Local camera rate: 0.0 Hz
14:26:53 - Stereo trigger rate: 0.0 Hz
14:26:53 - SPE trigger rate: 0.0 Hz
14:26:53 - Calibration trigger rate: 15087.0 Hz
14:26:53 - Software trigger rate: 0.0 Hz
14:26:53 - Pedestal trigger rate: 0.0 Hz
14:26:53 - Collected trigger rate: 0.0 Hz
14:26:53 - Busy rate: 0.0 Hz
14:26:53 - Camera trigger rate: 0.0 Hz
14:27:18 - Checking UCTS clock...
14:27:19 - UCTS clock is late by 23 seconds!
14:27:19 - Configuring UCTS
14:27:19 - Configuring TIB...
14:27:19 - Setting TIB forced mode to False
14:27:19 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
14:27:19 - Status: TibState.RunStopped
14:27:19 - Alarms: AlarmVector.BufferFull
14:27:19 - Connection status: False TXclient_alive: False
14:27:19 - Disabling PPS
14:27:21 - Status: TibState.PpsStopped
14:27:21 - Alarms: AlarmVector.BufferFull
14:27:21 - Connection status: False TXclient_alive: False
14:27:21 - Entering set_external_delay
14:27:21 - Setting ExternalDelayLocal to 0.000 ns
14:27:21 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
14:27:21 - Entering set_external_delay
14:27:21 - Setting ExternalDelayCalibration to 65.000 ns
14:27:21 - Writing 65.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
14:27:21 - Entering set_external_delay
14:27:21 - Setting ExternalDelaySphe to 150.000 ns
14:27:21 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
14:27:21 - Setting TIB trigger mode to 0x74 = TriggerMask.SlowControl|Pedestal|Software|Calibration
14:27:21 - Writing 116 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
14:27:21 - Writing 1 to Camera.TIB.InputsEnable.InputMask.InputMask_v
14:27:21 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
14:27:22 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
14:27:22 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
14:27:22 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
14:27:22 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
14:27:22 - Status: TibState.PpsStopped
14:27:22 - Alarms: AlarmVector.BufferFull
14:27:22 - Connection status: False TXclient_alive: False
14:27:22 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
14:27:22 - Writing 100 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
14:27:22 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
14:27:22 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
14:27:22 - Writing 100 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
14:27:22 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
14:27:22 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
14:27:22 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
14:27:22 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
14:27:22 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
14:27:25 - Checking status of calibration box...
14:27:26 - Calibration box is configured with 1 leds at a frequency of 1.0 Hz and a voltage of 15.98 V
14:27:35 - Configuring calibration box...
14:27:35 - Configuring calibration box with leds=0x40 voltage=15.98 frequency=300.0/300 central_current=0.0 duration=0 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=True enabled=True
14:27:53 - Connecting TIB to camera server at 10.10.4.12:222
14:27:53 - Starting TIB...
14:27:53 - Status: TibState.PpsStopped
14:27:53 - Alarms: AlarmVector.BufferFull
14:27:53 - Connection status: False TXclient_alive: False
14:27:53 - Resetting run
14:27:53 - Wait for UCTS external trigger before enabling trigger...
14:27:53 - Status: TibState.Standby
14:27:53 - Alarms: AlarmVector.NoAlarm
14:27:53 - Connection status: False TXclient_alive: True
14:27:53 - Status: TibState.Standby
14:27:53 - Alarms: AlarmVector.NoAlarm
14:27:53 - Connection status: False TXclient_alive: True
14:27:54 - Status: TibState.Armed
14:27:54 - Alarms: AlarmVector.NoAlarm
14:27:54 - Connection status: True TXclient_alive: True
14:27:59 - Starting TIB triggers...
14:27:59 - Enabling trigger
14:27:59 - Status: TibState.Running
14:27:59 - Alarms: AlarmVector.NoAlarm
14:27:59 - Connection status: True TXclient_alive: True
14:28:03 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
14:28:03 - Alarms: AlarmVector.NoAlarm
14:28:03 - Temperature: 29.12
14:28:03 - Local camera rate: 0.0 Hz
14:28:03 - Stereo trigger rate: 0.0 Hz
14:28:03 - SPE trigger rate: 0.0 Hz
14:28:03 - Calibration trigger rate: 15187.0 Hz
14:28:03 - Software trigger rate: 0.0 Hz
14:28:03 - Pedestal trigger rate: 100.0 Hz
14:28:03 - Collected trigger rate: 15161.0 Hz
14:28:03 - Busy rate: 187.0 Hz
14:28:03 - Camera trigger rate: 14974.0 Hz
14:28:12 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
14:28:12 - Alarms: AlarmVector.NoAlarm
14:28:12 - Temperature: 29.19
14:28:12 - Local camera rate: 0.0 Hz
14:28:12 - Stereo trigger rate: 0.0 Hz
14:28:12 - SPE trigger rate: 0.0 Hz
14:28:12 - Calibration trigger rate: 15096.0 Hz
14:28:12 - Software trigger rate: 0.0 Hz
14:28:12 - Pedestal trigger rate: 100.0 Hz
14:28:12 - Collected trigger rate: 15051.0 Hz
14:28:12 - Busy rate: 211.0 Hz
14:28:12 - Camera trigger rate: 14840.0 Hz
14:28:13 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
14:28:13 - Alarms: AlarmVector.NoAlarm
14:28:13 - Temperature: 29.25
14:28:13 - Local camera rate: 0.0 Hz
14:28:13 - Stereo trigger rate: 0.0 Hz
14:28:13 - SPE trigger rate: 0.0 Hz
14:28:13 - Calibration trigger rate: 15096.0 Hz
14:28:13 - Software trigger rate: 0.0 Hz
14:28:13 - Pedestal trigger rate: 100.0 Hz
14:28:13 - Collected trigger rate: 15051.0 Hz
14:28:13 - Busy rate: 211.0 Hz
14:28:13 - Camera trigger rate: 14840.0 Hz
14:28:16 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
14:28:16 - Alarms: AlarmVector.NoAlarm
14:28:16 - Temperature: 29.19
14:28:16 - Local camera rate: 0.0 Hz
14:28:16 - Stereo trigger rate: 0.0 Hz
14:28:16 - SPE trigger rate: 0.0 Hz
14:28:16 - Calibration trigger rate: 15012.0 Hz
14:28:16 - Software trigger rate: 0.0 Hz
14:28:16 - Pedestal trigger rate: 100.0 Hz
14:28:16 - Collected trigger rate: 14968.0 Hz
14:28:16 - Busy rate: 179.0 Hz
14:28:16 - Camera trigger rate: 14789.0 Hz
14:28:18 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
14:28:18 - Alarms: AlarmVector.NoAlarm
14:28:18 - Temperature: 29.25
14:28:18 - Local camera rate: 0.0 Hz
14:28:18 - Stereo trigger rate: 0.0 Hz
14:28:18 - SPE trigger rate: 0.0 Hz
14:28:18 - Calibration trigger rate: 15122.0 Hz
14:28:18 - Software trigger rate: 0.0 Hz
14:28:18 - Pedestal trigger rate: 100.0 Hz
14:28:18 - Collected trigger rate: 15110.0 Hz
14:28:18 - Busy rate: 177.0 Hz
14:28:19 - Camera trigger rate: 14933.0 Hz
14:28:20 - Status: TibState.Running ConnectionStatus: True TXclient_alive: True
14:28:20 - Alarms: AlarmVector.NoAlarm
14:28:20 - Temperature: 29.25
14:28:20 - Local camera rate: 0.0 Hz
14:28:20 - Stereo trigger rate: 0.0 Hz
14:28:20 - SPE trigger rate: 0.0 Hz
14:28:20 - Calibration trigger rate: 15122.0 Hz
14:28:20 - Software trigger rate: 0.0 Hz
14:28:20 - Pedestal trigger rate: 100.0 Hz
14:28:20 - Collected trigger rate: 15110.0 Hz
14:28:20 - Busy rate: 177.0 Hz
14:28:20 - Camera trigger rate: 14933.0 Hz
14:29:37 - Stopping TIB...
14:29:37 - Status: TibState.Running
14:29:37 - Alarms: AlarmVector.NoAlarm
14:29:37 - Connection status: True TXclient_alive: True
14:29:37 - Disabling trigger
14:29:37 - Disabling PPS
14:29:39 - Status: TibState.PpsStopped
14:29:39 - Alarms: AlarmVector.NoAlarm
14:29:39 - Connection status: True TXclient_alive: True
14:29:39 - Closing TIB connection to camera server
14:29:41 - Status: TibState.PpsStopped
14:29:41 - Alarms: AlarmVector.NoAlarm
14:29:41 - Connection status: False TXclient_alive: False
14:29:41 - Run duration: 0:01:44
14:29:41 - Local camera triggers: 0
14:29:41 - Slow control triggers: 0
14:29:41 - Single photo-electron triggers: 0
14:29:41 - Calibration triggers: 1550589
14:29:41 - Software triggers from UCTS: 0
14:29:41 - Pedestal triggers: 10300
14:29:41 - Collected input triggers: 1476470
14:29:41 - Busy triggers: 19529
14:29:41 - Camera event triggers sent to clusters: 1456941
14:30:05 - Calling method FSM.gotoReady in object FSM
14:30:07 - Stopping NMC
14:30:07 - Found 0 PPS errors.