09:44:23 - ECC is in state EccState.Alarm with status EccStatus.Error2
09:44:23 - ()
09:44:23 - Average temperature: 19.7 deg C
09:44:23 - Air temperature (T1-T6 and T9-T10): 19.7, 1255.0, -838.0, -838.0, -838.0, 1254.0, -838.0, 1253.0 deg C
09:44:23 - Air differential pressure: 90.9 Pa
09:44:23 - Water temperature (T11-T12): 1253.0, -838.0 deg C
09:44:23 - Back doors are open.
09:44:23 - Shutter is in state PartiallyOpen (error 0)
09:44:23 - Light sensors: [2.15, 2.62, 3.08, 3.43] V
09:44:23 - Humidity: 22.4 %. Water pressure: [4.68, 6.64] bar.
09:44:23 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
09:44:23 - 24 V power supply no. 1 is disabled with a current of 8.270 A.
09:44:26 - Acknowledging error...
09:44:30 - ECC is in state EccState.Safe with status EccStatus.NoError
09:44:30 - Average temperature: 19.7 deg C
09:44:30 - Air temperature (T1-T6 and T9-T10): 19.7, -838.0, 1254.0, -838.0, 1254.0, -838.0, -838.0, 1253.0 deg C
09:44:30 - Air differential pressure: 96.1 Pa
09:44:30 - Water temperature (T11-T12): 1253.0, 1254.0 deg C
09:44:30 - Back doors are open.
09:44:30 - Shutter is in state PartiallyOpen (error 0)
09:44:30 - Light sensors: [2.16, 2.63, 3.09, 3.44] V
09:44:30 - Humidity: 22.4 %. Water pressure: [4.72, 6.68] bar.
09:44:30 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
09:44:30 - 24 V power supply no. 1 is disabled with a current of 8.310 A.
09:44:33 - Starting task "Prepare ECC"
09:44:33 - Preparing ECC...
09:44:33 - Setting ECC temperature range for Ready state to [16.000000, 36.000000]
09:44:34 - Setting ECC mode to EccState.Ready
09:44:34 - Received ECC state change notification: EccState.Safe
09:44:36 - Received ECC state change notification: EccState.Ready
09:44:37 - Setting power supply box SPE relay to True
09:44:38 - Finished task "Prepare ECC"
09:44:40 - Alarms will be checked for every 15 s
09:44:57 - Starting task "Powering modules..."
09:44:57 - Executing command '/opt/cta/bin/cta_ctrl --all --power_off' on Digital Trigger Crate at 10.10.4.57
09:44:59 - Finished task "Powering modules..."
09:45:09 - Starting task "Powering modules..."
09:45:09 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:15 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:20 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:21 - ECC is in state EccState.Ready with status EccStatus.NoError
09:45:21 - Average temperature: 19.7 deg C
09:45:21 - Air temperature (T1-T6 and T9-T10): 19.7, 1255.0, 1254.0, -838.0, 1254.0, 1254.0, 1254.0, 1253.0 deg C
09:45:21 - Air differential pressure: 107.0 Pa
09:45:21 - Water temperature (T11-T12): -838.0, 1254.0 deg C
09:45:21 - Back doors are open.
09:45:21 - Shutter is in state PartiallyOpen (error 0)
09:45:21 - Light sensors: [2.21, 2.65, 3.11, 3.47] V
09:45:21 - Humidity: 23.5 %. Water pressure: [4.98, 6.86] bar.
09:45:21 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
09:45:21 - 24 V power supply no. 1 is enabled with a current of 21.500 A.
09:45:26 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:28 - b'Connection closed by 10.10.4.57 port 22\r\n'
09:45:32 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:38 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:43 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:49 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --all --power_on' on Digital Trigger Crate at 10.10.4.57
09:45:55 - Finished task "Powering modules..."
09:51:42 - ECC is in state EccState.Ready with status EccStatus.NoError
09:51:42 - Average temperature: 19.7 deg C
09:51:42 - Air temperature (T1-T6 and T9-T10): 19.7, 1255.0, 1254.0, 1254.0, -838.0, 1254.0, 1254.0, -838.0 deg C
09:51:42 - Air differential pressure: 130.0 Pa
09:51:42 - Water temperature (T11-T12): -838.0, 1254.0 deg C
09:51:42 - Back doors are open.
09:51:42 - Shutter is in state PartiallyOpen (error 0)
09:51:42 - Light sensors: [2.33, 2.77, 3.21, 3.54] V
09:51:42 - Humidity: 24.1 %. Water pressure: [5.34, 7.42] bar.
09:51:42 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
09:51:42 - 24 V power supply no. 1 is enabled with a current of 55.700 A.
09:51:44 - ECC is in state EccState.Ready with status EccStatus.NoError
09:51:44 - Average temperature: 19.7 deg C
09:51:44 - Air temperature (T1-T6 and T9-T10): 19.7, -838.0, 1254.0, -838.0, 1254.0, 1254.0, -838.0, -838.0 deg C
09:51:44 - Air differential pressure: 130.0 Pa
09:51:44 - Water temperature (T11-T12): -838.0, 1254.0 deg C
09:51:44 - Back doors are open.
09:51:44 - Shutter is in state PartiallyOpen (error 0)
09:51:44 - Light sensors: [2.32, 2.76, 3.21, 3.54] V
09:51:44 - Humidity: 24.0 %. Water pressure: [5.34, 7.4] bar.
09:51:44 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
09:51:44 - 24 V power supply no. 1 is enabled with a current of 55.700 A.
09:51:47 - Scanning interface p4p1 for non configured modules...
09:51:47 - Found 19 MAC address(es)
09:51:48 - Scanning interface p4p1 for non configured modules...
09:51:49 - Found 60 MAC address(es)
09:51:49 - Scanning interface p4p1 for non configured modules...
09:51:49 - Found 60 MAC address(es)
09:51:50 - Scanning interface p4p1 for non configured modules...
09:51:50 - Found 60 MAC address(es)
09:51:51 - Scanning interface p4p1 for non configured modules...
09:51:51 - Found 60 MAC address(es)
09:51:57 - Starting task "Configure modules"
09:52:01 - Setting L0 thresholds to 3.0 p.e. per pixel using L0 slopes and offsets in /local/home/cta_test_bench/data/2019/20191203/l0_threshold_slope_and_offset_feb.h5
09:52:12 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20191220/config_2019-12-20_09-51-57.NMC.xml
09:52:12 - Switching off high voltages in configuration
09:52:17 - Successfully configured 53 module(s)
09:52:23 - NMC is in state NmcState.Configured and knows of 53 drawer(s)
09:52:24 - Found 0 PPS errors.
09:52:24 - Finished task "Configure modules"
09:52:26 - Starting task "Power off channels not corresponding to a configured module"
09:52:26 - Powering off all but 53 DTC channel(s)
09:52:26 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 4 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:28 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:30 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --channel 3 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:32 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --channel 9 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:33 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 1 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:35 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 2 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:36 - Event builder is in state CameraServerState.Ready and has output 170236 event(s) (170236 complete).
09:52:37 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 4 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:39 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 6 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:40 - Calling method FSM.gotoObserving in object FSM
09:52:40 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 7 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:42 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 8 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:44 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 9 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:46 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 10 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:47 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:49 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 12 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:50 - Starting task "Switch HVPA voltage state"
09:52:50 - Setting HVPA current limit to 12489.75 uA
09:52:51 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:53 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:54 - Executing command '/opt/cta/bin/cta_ctrl --slot 6 --channel 15 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:56 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 1 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:58 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 2 --power_off' on Digital Trigger Crate at 10.10.4.57
09:52:59 - High voltage locked channels will be checked every 30 s
09:53:00 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 3 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:01 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 4 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:03 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 5 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:05 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 6 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:07 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 7 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:08 - Setting HVPA ramp speed to 25 V/s
09:53:08 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 8 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:10 - Switching HVPA to state Nominal
09:53:10 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 9 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:12 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 10 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:14 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:15 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 12 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:17 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:19 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:19 - Setting HVPA current limits...
09:53:21 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 15 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:22 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --channel 1 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:24 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --channel 2 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:26 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --channel 6 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:28 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:29 - Checking for high voltage locked pixels...
09:53:29 - Module 81 has 1 pixel(s) locked (HVPA status of 0x3f)!
09:53:31 - Unlocking 1 channel(s)...
09:53:31 - Resetting HVPA channel 6 of drawer 81...
09:53:29 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 1 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:31 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 2 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:33 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 3 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:35 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 5 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:36 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 8 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:38 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 9 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:40 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 10 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:42 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:42 - Finished task "Switch HVPA voltage state"
09:53:43 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 12 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:45 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:47 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:49 - Executing command '/opt/cta/bin/cta_ctrl --slot 14 --channel 15 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:50 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 1 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:52 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 2 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:54 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 3 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:56 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 4 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:57 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 5 --power_off' on Digital Trigger Crate at 10.10.4.57
09:53:59 - Checking for high voltage locked pixels...
09:54:00 - Module 130 has 1 pixel(s) locked (HVPA status of 0x3f)!
09:54:00 - Module 152 has 1 pixel(s) locked (HVPA status of 0x7b)!
09:54:00 - Module 163 has 1 pixel(s) locked (HVPA status of 0x77)!
09:54:00 - Unlocking 3 channel(s)...
09:54:01 - Resetting HVPA channel 6 of drawer 130...
09:54:01 - Resetting HVPA channel 2 of drawer 152...
09:54:01 - Resetting HVPA channel 3 of drawer 163...
09:53:59 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 6 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:01 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 7 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:03 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 8 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:04 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:06 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 12 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:08 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:10 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:11 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --channel 15 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:13 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 3 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:15 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 4 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:17 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 5 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:18 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 6 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:20 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:22 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
09:54:24 - Finished task "Power off channels not corresponding to a configured module"
09:54:29 - Checking for high voltage locked pixels...
09:54:59 - Checking for high voltage locked pixels...
09:55:29 - Checking for high voltage locked pixels...
09:55:59 - Checking for high voltage locked pixels...
09:56:29 - Checking for high voltage locked pixels...
09:56:59 - Checking for high voltage locked pixels...
09:57:29 - Checking for high voltage locked pixels...
09:57:59 - Checking for high voltage locked pixels...
09:58:13 - Starting NMC
09:58:13 - Clearing PPS error counters
09:58:25 - Configuring calibration box...
09:58:25 - Configuring calibration box with leds=0x358 voltage=8.00 frequency=1000.0/1 central_current=0.0 duration=0 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=True enabled=True
09:58:29 - Checking for high voltage locked pixels...
09:58:57 - Configuring UCTS
09:58:57 - Configuring TIB...
09:58:57 - Setting TIB forced mode to False
09:58:57 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
09:58:57 - Status: TibState.RunStopped
09:58:57 - Alarms: AlarmVector.NoAlarm
09:58:57 - Connection status: False
09:58:57 - Disabling PPS
09:58:59 - Status: TibState.PpsStopped
09:58:59 - Alarms: AlarmVector.NoAlarm
09:58:59 - Connection status: False
09:58:59 - Entering set_external_delay
09:58:59 - Setting ExternalDelayLocal to 0.000 ns
09:58:59 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
09:59:00 - Entering set_external_delay
09:59:00 - Setting ExternalDelayCalibration to 98.000 ns
09:59:00 - Writing 98.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
09:59:00 - Entering set_external_delay
09:59:00 - Setting ExternalDelaySphe to 150.000 ns
09:59:00 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
09:59:01 - Setting TIB trigger mode to 0x74 = TriggerMask.SlowControl|Pedestal|Software|Calibration
09:59:01 - Writing 116 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
09:59:01 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
09:59:01 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
09:59:01 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
09:59:01 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
09:59:01 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
09:59:01 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
09:59:01 - Status: TibState.PpsStopped
09:59:01 - Alarms: AlarmVector.NoAlarm
09:59:01 - Connection status: False
09:59:01 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
09:59:01 - Writing 2000 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
09:59:01 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
09:59:01 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
09:59:01 - Writing 2000 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
09:59:01 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
09:59:01 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
09:59:01 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
09:59:01 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
09:59:01 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
09:59:01 - Checking for high voltage locked pixels...
09:59:28 - Connecting TIB to camera server at 10.10.4.12:222
09:59:28 - Starting TIB...
09:59:28 - Status: TibState.PpsStopped
09:59:28 - Alarms: AlarmVector.NoAlarm
09:59:28 - Connection status: False
09:59:28 - Resetting run
09:59:28 - Wait for UCTS external trigger before enabling trigger...
09:59:28 - Status: TibState.Standby
09:59:28 - Alarms: AlarmVector.NoAlarm
09:59:28 - Connection status: False
09:59:28 - Status: TibState.Standby
09:59:28 - Alarms: AlarmVector.NoAlarm
09:59:28 - Connection status: False
09:59:29 - Status: TibState.Armed
09:59:29 - Alarms: AlarmVector.NoAlarm
09:59:29 - Connection status: True
09:59:30 - Checking for high voltage locked pixels...
09:59:31 - Starting TIB triggers...
09:59:31 - Enabling trigger
09:59:31 - Status: TibState.Running
09:59:31 - Alarms: AlarmVector.NoAlarm
09:59:31 - Connection status: True
09:59:33 - Status: TibState.Running ConnectionStatus: True
09:59:33 - Alarms: AlarmVector.NoAlarm
09:59:33 - Temperature: 29.38
09:59:33 - Local camera rate: 0.0 Hz
09:59:33 - Stereo trigger rate: 0.0 Hz
09:59:33 - SPE trigger rate: 0.0 Hz
09:59:33 - Calibration trigger rate: 7973.0 Hz
09:59:33 - Software trigger rate: 0.0 Hz
09:59:33 - Pedestal trigger rate: 1998.0 Hz
09:59:33 - Collected trigger rate: 8971.0 Hz
09:59:33 - Busy rate: 517.0 Hz
09:59:33 - Camera trigger rate: 8454.0 Hz
09:59:35 - Stopping TIB...
09:59:35 - Status: TibState.Running
09:59:35 - Alarms: AlarmVector.NoAlarm
09:59:35 - Connection status: True
09:59:35 - Disabling trigger
09:59:35 - Disabling PPS
09:59:36 - Status: TibState.PpsStopped
09:59:36 - Alarms: AlarmVector.NoAlarm
09:59:36 - Connection status: True
09:59:36 - Closing TIB connection to camera server
09:59:38 - Status: TibState.PpsStopped
09:59:38 - Alarms: AlarmVector.NoAlarm
09:59:38 - Connection status: False
09:59:38 - Run duration: 0:00:05
09:59:38 - Local camera triggers: 0
09:59:38 - Slow control triggers: 0
09:59:38 - Single photo-electron triggers: 0
09:59:38 - Calibration triggers: 39809
09:59:38 - Software triggers from UCTS: 0
09:59:38 - Pedestal triggers: 9931
09:59:38 - Collected input triggers: 30534
09:59:38 - Busy triggers: 1745
09:59:39 - Camera event triggers sent to clusters: 28789
09:59:41 - Calling method FSM.gotoReady in object FSM
09:59:59 - Checking for high voltage locked pixels...
10:00:29 - Checking for high voltage locked pixels...
10:00:59 - Checking for high voltage locked pixels...
10:01:29 - Checking for high voltage locked pixels...
10:01:59 - Checking for high voltage locked pixels...
10:02:29 - Checking for high voltage locked pixels...
10:02:59 - Checking for high voltage locked pixels...
10:03:29 - Checking for high voltage locked pixels...
10:03:59 - Checking for high voltage locked pixels...
10:04:29 - Checking for high voltage locked pixels...
10:04:59 - Checking for high voltage locked pixels...
10:05:29 - Checking for high voltage locked pixels...
10:05:59 - Checking for high voltage locked pixels...
10:06:29 - Checking for high voltage locked pixels...
10:06:59 - Checking for high voltage locked pixels...
10:07:29 - Checking for high voltage locked pixels...
10:07:59 - Checking for high voltage locked pixels...
10:08:29 - Checking for high voltage locked pixels...
10:08:59 - Checking for high voltage locked pixels...
10:09:29 - Checking for high voltage locked pixels...
10:09:59 - Checking for high voltage locked pixels...
10:10:29 - Checking for high voltage locked pixels...
10:10:59 - Checking for high voltage locked pixels...
10:11:29 - Checking for high voltage locked pixels...
10:11:59 - Checking for high voltage locked pixels...
10:12:29 - Checking for high voltage locked pixels...
10:12:59 - Checking for high voltage locked pixels...
10:13:29 - Checking for high voltage locked pixels...
10:13:59 - Checking for high voltage locked pixels...
10:14:29 - Checking for high voltage locked pixels...
10:14:59 - Checking for high voltage locked pixels...
10:15:29 - Checking for high voltage locked pixels...
10:15:59 - Checking for high voltage locked pixels...
10:16:29 - Checking for high voltage locked pixels...
10:16:59 - Checking for high voltage locked pixels...
10:17:29 - Checking for high voltage locked pixels...
10:17:59 - Checking for high voltage locked pixels...
10:18:29 - Checking for high voltage locked pixels...
10:18:59 - Checking for high voltage locked pixels...
10:19:29 - Checking for high voltage locked pixels...
10:19:59 - Checking for high voltage locked pixels...
10:20:29 - Checking for high voltage locked pixels...
10:20:59 - Checking for high voltage locked pixels...
10:21:29 - Checking for high voltage locked pixels...
10:21:59 - Checking for high voltage locked pixels...
10:22:29 - Checking for high voltage locked pixels...
10:22:59 - Checking for high voltage locked pixels...
10:23:29 - Checking for high voltage locked pixels...
10:23:59 - Checking for high voltage locked pixels...
10:24:29 - Checking for high voltage locked pixels...
10:24:59 - Checking for high voltage locked pixels...
10:25:29 - Checking for high voltage locked pixels...