16:20:14 - Resetting NMC
16:20:16 - Starting task "Configure modules"
16:20:16 - Setting L0 thresholds to 3.0 p.e. per pixel using L0 slopes and offsets in /local/home/cta_test_bench/data/2019/20191203/l0_threshold_slope_and_offset_feb.h5
16:20:18 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20191206/config_2019-12-06_16-20-16.NMC.xml
16:20:18 - Switching off high voltages in configuration
16:20:21 - Successfully configured 53 module(s)
16:20:22 - Stopping flashes...
16:20:25 - Checking status of calibration box...
16:20:26 - Calibration box is configured with 13 leds at a frequency of 1000.0 Hz and a voltage of 12.00 V
16:20:27 - NMC is in state NmcState.Configured and knows of 53 drawer(s)
16:20:27 - Found 0 PPS errors.
16:20:27 - Finished task "Configure modules"
16:20:31 - Starting task "Switch HVPA voltage state"
16:20:31 - Setting HVPA current limit to 12489.75 uA
16:20:49 - Setting HVPA ramp speed to 25 V/s
16:20:51 - Switching HVPA to state Nominal
16:20:55 - High voltage locked channels will be checked every 30 s
16:21:00 - Setting HVPA current limits...
16:21:23 - Finished task "Switch HVPA voltage state"
16:21:24 - Checking for high voltage locked pixels...
16:21:34 - Event builder is in state CameraServerState.Ready and has output 226527 event(s) (226527 complete).
16:21:36 - Calling method FSM.gotoObserving in object FSM
16:21:54 - Checking for high voltage locked pixels...
16:22:08 - Starting task "Check high voltages"
16:22:09 - Found 53 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
16:22:17 - Actual voltage is between 944.89 V and 1167.54 V.
16:22:17 - Low voltages range between 300.00 V and 300.00 V. 
16:22:24 - Checking for high voltage locked pixels...
16:22:26 - Reference voltages range between 945.26 V and 1167.15 V. 
16:22:35 - Maximum difference between expected and actual voltages is 0.81 V
16:22:40 - Maximum of current limits is 5647.07 uA
16:22:40 - Checking status of HVPA module in 53 drawer(s)...
16:22:41 - Checking status of HVPA channels in 53 drawer(s)...
16:22:45 - HV is stabilized in all channels.
16:22:45 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20191206/config_tower_53modules_masks_delays_pattern.NMC.xml
16:22:50 - Done
16:22:50 - Finished task "Check high voltages"
16:22:50 - Starting NMC
16:22:50 - Clearing PPS error counters
16:22:54 - Checking for high voltage locked pixels...
16:23:24 - Checking for high voltage locked pixels...
16:23:44 - Configuring UCTS
16:23:44 - Configuring TIB...
16:23:44 - Setting TIB forced mode to False
16:23:44 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
16:23:44 - Status: TibState.RunStopped
16:23:44 - Alarms: AlarmVector.NoAlarm
16:23:44 - Connection status: False
16:23:44 - Disabling PPS
16:23:46 - Status: TibState.PpsStopped
16:23:46 - Alarms: AlarmVector.NoAlarm
16:23:46 - Connection status: False
16:23:46 - Entering set_external_delay
16:23:46 - Setting ExternalDelayLocal to 0.000 ns
16:23:46 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
16:23:47 - Entering set_external_delay
16:23:47 - Setting ExternalDelayCalibration to 98.000 ns
16:23:47 - Writing 98.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
16:23:47 - Entering set_external_delay
16:23:47 - Setting ExternalDelaySphe to 150.000 ns
16:23:47 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
16:23:47 - Setting TIB trigger mode to 0x51 = TriggerMask.SlowControl|Software|Mono
16:23:47 - Writing 81 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
16:23:47 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
16:23:47 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
16:23:47 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
16:23:47 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
16:23:47 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
16:23:47 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
16:23:47 - Status: TibState.PpsStopped
16:23:47 - Alarms: AlarmVector.NoAlarm
16:23:47 - Connection status: False
16:23:47 - Writing False to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
16:23:47 - Writing 100 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
16:23:47 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:23:47 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
16:23:47 - Writing 100 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
16:23:47 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
16:23:47 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:23:47 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
16:23:47 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
16:23:47 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:23:50 - Connecting TIB to camera server at 10.10.4.12:222
16:23:50 - Starting TIB...
16:23:50 - Status: TibState.PpsStopped
16:23:50 - Alarms: AlarmVector.NoAlarm
16:23:50 - Connection status: False
16:23:50 - Resetting run
16:23:50 - Wait for UCTS external trigger before enabling trigger...
16:23:50 - Status: TibState.Standby
16:23:50 - Alarms: AlarmVector.NoAlarm
16:23:50 - Connection status: False
16:23:50 - Status: TibState.Standby
16:23:50 - Alarms: AlarmVector.NoAlarm
16:23:50 - Connection status: False
16:23:51 - Status: TibState.Armed
16:23:51 - Alarms: AlarmVector.NoAlarm
16:23:51 - Connection status: True
16:23:54 - Checking for high voltage locked pixels...
16:23:57 - Starting TIB triggers...
16:23:57 - Enabling trigger
16:23:57 - Status: TibState.Running
16:23:57 - Alarms: AlarmVector.NoAlarm
16:23:57 - Connection status: True
16:24:14 - Status: TibState.Running ConnectionStatus: True
16:24:14 - Alarms: AlarmVector.ReadError
16:24:14 - Temperature: 40.69
16:24:14 - Local camera rate: 0.0 Hz
16:24:14 - Stereo trigger rate: 0.0 Hz
16:24:14 - SPE trigger rate: 0.0 Hz
16:24:14 - Calibration trigger rate: 0.0 Hz
16:24:14 - Software trigger rate: 0.0 Hz
16:24:14 - Pedestal trigger rate: 0.0 Hz
16:24:14 - Collected trigger rate: 1.0 Hz
16:24:14 - Busy rate: 0.0 Hz
16:24:14 - Camera trigger rate: 1.0 Hz
16:24:24 - Checking for high voltage locked pixels...
16:24:54 - Checking for high voltage locked pixels...
16:25:24 - Checking for high voltage locked pixels...
16:25:54 - Checking for high voltage locked pixels...
16:26:24 - Checking for high voltage locked pixels...
16:26:54 - Checking for high voltage locked pixels...
16:27:24 - Checking for high voltage locked pixels...
16:27:33 - Stopping TIB...
16:27:33 - Status: TibState.Running
16:27:33 - Alarms: AlarmVector.ReadError
16:27:33 - Connection status: True
16:27:33 - Disabling trigger
16:27:33 - Disabling PPS
16:27:34 - Status: TibState.PpsStopped
16:27:34 - Alarms: AlarmVector.ReadError
16:27:34 - Connection status: True
16:27:34 - Closing TIB connection to camera server
16:27:39 - Calling method FSM.gotoReady in object FSM
16:27:51 - Status: TibState.PpsStopped
16:27:51 - Alarms: AlarmVector.ReadError
16:27:51 - Connection status: False
16:27:51 - Run duration: 0:03:43
16:27:51 - Local camera triggers: 0
16:27:51 - Slow control triggers: 0
16:27:51 - Single photo-electron triggers: 0
16:27:51 - Calibration triggers: 0
16:27:51 - Software triggers from UCTS: 0
16:27:51 - Pedestal triggers: 0
16:27:51 - Collected input triggers: 379
16:27:51 - Busy triggers: 0
16:27:51 - Camera event triggers sent to clusters: 379
16:27:54 - Checking for high voltage locked pixels...