15:24:37 - ECC is in state EccState.Safe with status EccStatus.NoError
15:24:37 - Average temperature: 23.3 deg C
15:24:37 - Air temperature (T1-T6 and T9-T10): 23.5, 22.9, 23.6, 23.3, 23.9, 24.0, 24.7, 25.0 deg C
15:24:37 - Air differential pressure: 1.3 Pa
15:24:37 - Water temperature (T11-T12): 25.4, 25.3 deg C
15:24:37 - Back doors are closed.
15:24:37 - Shutter is in state Open (error 0)
15:24:37 - Light sensors: [0.01, 0.01, 0.01, 0.01] V
15:24:37 - Humidity: 47.7 %. Water pressure: [2.76, 2.08] bar.
15:24:37 - Fan speeds: [0.0, 0.0, 2460.0, 2460.0, 0.0, 0.0] rpm
15:24:37 - 24 V power supply no. 1 is enabled with a current of 0.900 A.
16:18:22 - Starting task "Prepare ECC"
16:18:22 - Preparing ECC...
16:18:24 - Setting ECC temperature range for Ready state to [16.000000, 36.000000]
16:18:24 - Setting ECC mode to EccState.Ready
16:18:24 - Received ECC state change notification: EccState.Safe
16:18:28 - Received ECC state change notification: EccState.Ready
16:18:29 - Setting power supply box SPE relay to True
16:18:29 - Unsubscribing
16:18:30 - Finished task "Prepare ECC"
16:21:06 - Starting task "Powering modules..."
16:21:06 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --all --power_on' on Digital Trigger Crate at 10.10.4.57
16:21:12 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --all --power_on' on Digital Trigger Crate at 10.10.4.57
16:21:18 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --all --power_on' on Digital Trigger Crate at 10.10.4.57
16:21:24 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --all --power_on' on Digital Trigger Crate at 10.10.4.57
16:21:30 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --all --power_on' on Digital Trigger Crate at 10.10.4.57
16:21:35 - Finished task "Powering modules..."
16:22:46 - Starting task "Configure modules"
16:22:46 - Setting L0 thresholds to 1.0 p.e. per pixel using L0 slopes and offsets in /local/home/cta_test_bench/data/2019/20190328/l0_threshold_slope_and_offset.h5
16:22:55 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20191011/config_2019-10-11_16-22-46.NMC.xml
16:22:55 - Switching off high voltages in configuration
16:23:00 - Successfully configured 54 module(s)
16:23:07 - NMC is in state NmcState.Configured and knows of 54 drawer(s)
16:23:07 - Found PPS errors: 2 in drawer 128, 2 in drawer 129, 2 in drawer 130, 2 in drawer 131, 2 in drawer 132, 2 in drawer 133, 2 in drawer 134, 2 in drawer 135, 2 in drawer 136
16:23:08 - Finished task "Configure modules"
16:31:16 - Starting task "Power off channels not corresponding to a configured module"
16:31:16 - Powering off all but 54 DTC channel(s)
16:31:17 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 6 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:19 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 7 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:21 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:23 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:24 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:26 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --channel 15 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:28 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --channel 1 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:30 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 10 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:31 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:33 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 12 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:35 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:37 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:38 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --channel 15 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:40 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --channel 7 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:42 - Executing command '/opt/cta/bin/cta_ctrl --slot 13 --channel 10 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:44 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 4 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:45 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 6 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:47 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 11 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:49 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 13 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:51 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 14 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:52 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --channel 15 --power_off' on Digital Trigger Crate at 10.10.4.57
16:31:54 - Finished task "Power off channels not corresponding to a configured module"
16:31:58 - Starting task "Switch HVPA voltage state"
16:31:58 - Setting HVPA current limit to 12489.75 uA
16:32:02 - High voltage locked channels will be checked every 30 s
16:32:16 - Setting HVPA ramp speed to 25 V/s
16:32:18 - Switching HVPA to state Nominal
16:32:27 - Setting HVPA current limits...
16:32:32 - Checking for high voltage locked pixels...
16:32:33 - Module 83 has 1 pixel(s) locked (HVPA status of 0x77)!
16:32:34 - Unlocking 1 channel(s)...
16:32:34 - Resetting HVPA channel 3 of drawer 83...
16:32:50 - Finished task "Switch HVPA voltage state"
16:33:02 - Starting task "Check high voltages"
16:33:02 - Checking for high voltage locked pixels...
16:33:03 - Module 111 has 1 pixel(s) locked (HVPA status of 0x7d)!
16:33:04 - Unlocking 1 channel(s)...
16:33:04 - Resetting HVPA channel 1 of drawer 111...
16:33:03 - Found 54 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
16:33:11 - Actual voltage is between 21.96 V and 1167.54 V.
16:33:12 - Low voltages range between 300.00 V and 300.00 V. 
16:33:21 - Reference voltages range between 945.26 V and 1167.15 V. 
16:33:30 - Maximum difference between expected and actual voltages is 340.73 V
16:33:32 - Checking for high voltage locked pixels...
16:33:35 - Maximum of current limits is 5647.07 uA
16:33:35 - Checking status of HVPA module in 54 drawer(s)...
16:33:36 - Checking status of HVPA channels in 54 drawer(s)...
16:33:40 - HV is stabilized in all channels.
16:33:40 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20191011/config_54modules_disableModule136.NMC.xml
16:33:45 - Done
16:33:45 - Finished task "Check high voltages"
16:34:02 - Checking for high voltage locked pixels...
16:34:09 - Starting task "Check high voltages"
16:34:10 - Found 54 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
16:34:16 - Resetting TIB...
16:34:18 - Failed to call Reset: Bad statuses are present
16:34:18 - Actual voltage is between 945.50 V and 1167.54 V.
16:34:19 - Low voltages range between 300.00 V and 300.00 V. 
16:34:28 - Reference voltages range between 945.26 V and 1167.15 V. 
16:34:32 - Checking for high voltage locked pixels...
16:34:37 - Maximum difference between expected and actual voltages is 0.69 V
16:34:42 - Maximum of current limits is 5647.07 uA
16:34:42 - Checking status of HVPA module in 54 drawer(s)...
16:34:43 - Checking status of HVPA channels in 54 drawer(s)...
16:34:47 - HV is stabilized in all channels.
16:34:47 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20191011/config_54modules_disableModule136.NMC.xml
16:34:52 - Done
16:34:52 - Finished task "Check high voltages"
16:35:01 - Starting NMC
16:35:01 - Clearing PPS error counters
16:35:05 - Checking for high voltage locked pixels...
16:35:09 - Calling method FSM.gotoObserving in object FSM
16:35:23 - Configuring UCTS
16:35:23 - Configuring TIB...
16:35:23 - Setting TIB forced mode to False
16:35:23 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
16:35:23 - Status: TibState.RunStopped
16:35:23 - Alarms: AlarmVector.NoAlarm
16:35:23 - Connection status: False
16:35:23 - Disabling PPS
16:35:25 - Status: TibState.PpsStopped
16:35:25 - Alarms: AlarmVector.NoAlarm
16:35:25 - Connection status: False
16:35:25 - Entering set_external_delay
16:35:25 - Setting ExternalDelayLocal to 0.000 ns
16:35:25 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
16:35:25 - Entering set_external_delay
16:35:25 - Setting ExternalDelayCalibration to 50.000 ns
16:35:25 - Writing 50.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
16:35:25 - Entering set_external_delay
16:35:25 - Setting ExternalDelaySphe to 150.000 ns
16:35:25 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
16:35:25 - Setting TIB trigger mode to 0x71 = TriggerMask.SlowControl|Pedestal|Software|Mono
16:35:25 - Writing 113 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
16:35:26 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
16:35:26 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
16:35:26 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
16:35:26 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
16:35:26 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
16:35:26 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
16:35:26 - Status: TibState.PpsStopped
16:35:26 - Alarms: AlarmVector.NoAlarm
16:35:26 - Connection status: False
16:35:26 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
16:35:26 - Writing 1 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
16:35:26 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:35:26 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
16:35:26 - Writing 1 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
16:35:26 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
16:35:26 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:35:26 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
16:35:26 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
16:35:26 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:35:29 - Connecting TIB to camera server at 10.10.4.12:222
16:35:29 - Starting TIB...
16:35:29 - Status: TibState.PpsStopped
16:35:29 - Alarms: AlarmVector.NoAlarm
16:35:29 - Connection status: False
16:35:29 - Resetting run
16:35:29 - Wait for UCTS external trigger before enabling trigger...
16:35:29 - Status: TibState.Standby
16:35:29 - Alarms: AlarmVector.NoAlarm
16:35:29 - Connection status: False
16:35:29 - Status: TibState.Standby
16:35:29 - Alarms: AlarmVector.NoAlarm
16:35:29 - Connection status: False
16:35:30 - Status: TibState.Armed
16:35:30 - Alarms: AlarmVector.NoAlarm
16:35:30 - Connection status: True
16:35:31 - Starting TIB triggers...
16:35:31 - Enabling trigger
16:35:31 - Status: TibState.Running
16:35:31 - Alarms: AlarmVector.NoAlarm
16:35:31 - Connection status: True
16:35:32 - Checking for high voltage locked pixels...
16:36:02 - Checking for high voltage locked pixels...
16:36:32 - Checking for high voltage locked pixels...
16:36:45 - Starting task "Set L0 trigger thresholds"
16:36:45 - Setting L0 thresholds to 0.5 p.e. using /local/home/cta_test_bench/data/2019/20190328/l0_threshold_slope_and_offset.h5
16:37:02 - Checking for high voltage locked pixels...
16:37:03 - Setting L0 thresholds to 0.5 p.e. per pixel using L0 slopes and offsets in /local/home/cta_test_bench/data/2019/20190328/l0_threshold_slope_and_offset.h5
16:37:04 - Thresholds saved in configuration file /local/home/cta_test_bench/config/2019/20191011/config_2019-10-11_16-37-03.NMC.xml
16:37:04 - Finished task "Set L0 trigger thresholds"
16:37:32 - Checking for high voltage locked pixels...
16:38:02 - Checking for high voltage locked pixels...
16:38:32 - Checking for high voltage locked pixels...
16:39:02 - Checking for high voltage locked pixels...
16:39:32 - Stopping NMC
16:39:33 - Found 0 PPS errors.
16:39:33 - Checking for high voltage locked pixels...
16:39:55 - Stopping TIB...
16:39:55 - Status: TibState.Running
16:39:55 - Alarms: AlarmVector.ReadError
16:39:55 - Connection status: True
16:39:55 - Disabling trigger
16:39:56 - Disabling PPS
16:39:57 - Status: TibState.PpsStopped
16:39:57 - Alarms: AlarmVector.ReadError
16:39:57 - Connection status: True
16:39:57 - Closing TIB connection to camera server
16:40:02 - Checking for high voltage locked pixels...
16:40:06 - Calling method FSM.gotoReady in object FSM
16:40:19 - Starting NMC
16:40:19 - Clearing PPS error counters
16:40:23 - Calling method FSM.gotoObserving in object FSM
16:40:32 - Checking for high voltage locked pixels...
16:41:02 - Checking for high voltage locked pixels...
16:41:32 - Checking for high voltage locked pixels...
16:41:40 - Configuring UCTS
16:41:40 - Configuring TIB...
16:41:40 - Setting TIB forced mode to False
16:41:40 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
16:41:40 - Status: TibState.PpsStopped
16:41:40 - Alarms: AlarmVector.ReadError
16:41:40 - Connection status: False
16:41:40 - Entering set_external_delay
16:41:40 - Setting ExternalDelayLocal to 0.000 ns
16:41:40 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
16:41:40 - Entering set_external_delay
16:41:40 - Setting ExternalDelayCalibration to 50.000 ns
16:41:40 - Writing 50.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
16:41:40 - Entering set_external_delay
16:41:40 - Setting ExternalDelaySphe to 150.000 ns
16:41:40 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
16:41:40 - Setting TIB trigger mode to 0x71 = TriggerMask.SlowControl|Pedestal|Software|Mono
16:41:40 - Writing 113 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
16:41:40 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
16:41:41 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
16:41:41 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
16:41:41 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
16:41:41 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
16:41:41 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
16:41:41 - Status: TibState.PpsStopped
16:41:41 - Alarms: AlarmVector.ReadError
16:41:41 - Connection status: False
16:41:41 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
16:41:41 - Writing 1 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
16:41:41 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:41:41 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
16:41:41 - Writing 1 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
16:41:41 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
16:41:41 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:41:41 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
16:41:41 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
16:41:41 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:41:44 - Resetting TIB...
16:41:45 - Failed to call Reset: Bad statuses are present
16:41:46 - Configuring UCTS
16:41:46 - Configuring TIB...
16:41:46 - Setting TIB forced mode to False
16:41:46 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
16:41:46 - Status: TibState.RunStopped
16:41:46 - Alarms: AlarmVector.NoAlarm
16:41:46 - Connection status: False
16:41:46 - Disabling PPS
16:41:48 - Status: TibState.PpsStopped
16:41:48 - Alarms: AlarmVector.NoAlarm
16:41:48 - Connection status: False
16:41:48 - Entering set_external_delay
16:41:48 - Setting ExternalDelayLocal to 0.000 ns
16:41:48 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
16:41:49 - Entering set_external_delay
16:41:49 - Setting ExternalDelayCalibration to 50.000 ns
16:41:49 - Writing 50.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
16:41:49 - Entering set_external_delay
16:41:49 - Setting ExternalDelaySphe to 150.000 ns
16:41:49 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
16:41:49 - Setting TIB trigger mode to 0x71 = TriggerMask.SlowControl|Pedestal|Software|Mono
16:41:49 - Writing 113 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
16:41:49 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
16:41:49 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
16:41:49 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
16:41:49 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
16:41:49 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
16:41:49 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
16:41:49 - Status: TibState.PpsStopped
16:41:49 - Alarms: AlarmVector.NoAlarm
16:41:49 - Connection status: False
16:41:49 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
16:41:49 - Writing 1 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
16:41:49 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:41:49 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
16:41:49 - Writing 1 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
16:41:49 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
16:41:49 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:41:49 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
16:41:49 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
16:41:49 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
16:41:51 - Connecting TIB to camera server at 10.10.4.12:222
16:41:51 - Starting TIB...
16:41:51 - Status: TibState.PpsStopped
16:41:51 - Alarms: AlarmVector.NoAlarm
16:41:51 - Connection status: False
16:41:51 - Resetting run
16:41:51 - Wait for UCTS external trigger before enabling trigger...
16:41:51 - Status: TibState.Standby
16:41:51 - Alarms: AlarmVector.NoAlarm
16:41:51 - Connection status: False
16:41:51 - Status: TibState.Standby
16:41:51 - Alarms: AlarmVector.NoAlarm
16:41:51 - Connection status: False
16:41:52 - Status: TibState.Armed
16:41:52 - Alarms: AlarmVector.NoAlarm
16:41:52 - Connection status: True
16:41:55 - Starting TIB triggers...
16:41:55 - Enabling trigger
16:41:55 - Status: TibState.Running
16:41:55 - Alarms: AlarmVector.NoAlarm
16:41:55 - Connection status: True
16:41:59 - Status: TibState.Running ConnectionStatus: True
16:41:59 - Alarms: AlarmVector.ReadError
16:41:59 - Temperature: 37.44
16:41:59 - Local camera rate: 0.0 Hz
16:41:59 - Stereo trigger rate: 0.0 Hz
16:41:59 - SPE trigger rate: 0.0 Hz
16:41:59 - Calibration trigger rate: 0.0 Hz
16:41:59 - Software trigger rate: 0.0 Hz
16:41:59 - Pedestal trigger rate: 1.0 Hz
16:41:59 - Collected trigger rate: 17.0 Hz
16:41:59 - Busy rate: 0.0 Hz
16:41:59 - Camera trigger rate: 17.0 Hz
16:42:02 - Checking for high voltage locked pixels...
16:42:32 - Checking for high voltage locked pixels...
16:43:02 - Checking for high voltage locked pixels...
16:43:32 - Checking for high voltage locked pixels...
16:43:48 - Status: TibState.Running ConnectionStatus: True
16:43:48 - Alarms: AlarmVector.ReadError
16:43:48 - Temperature: 37.62
16:43:48 - Local camera rate: 0.0 Hz
16:43:48 - Stereo trigger rate: 0.0 Hz
16:43:48 - SPE trigger rate: 0.0 Hz
16:43:48 - Calibration trigger rate: 0.0 Hz
16:43:48 - Software trigger rate: 0.0 Hz
16:43:48 - Pedestal trigger rate: 1.0 Hz
16:43:48 - Collected trigger rate: 30.0 Hz
16:43:48 - Busy rate: 5.0 Hz
16:43:48 - Camera trigger rate: 25.0 Hz
16:44:02 - Checking for high voltage locked pixels...
16:44:11 - Status: TibState.Running ConnectionStatus: True
16:44:11 - Alarms: AlarmVector.ReadError
16:44:11 - Temperature: 37.62
16:44:11 - Local camera rate: 0.0 Hz
16:44:11 - Stereo trigger rate: 0.0 Hz
16:44:11 - SPE trigger rate: 0.0 Hz
16:44:11 - Calibration trigger rate: 0.0 Hz
16:44:11 - Software trigger rate: 0.0 Hz
16:44:11 - Pedestal trigger rate: 1.0 Hz
16:44:11 - Collected trigger rate: 58.0 Hz
16:44:11 - Busy rate: 9.0 Hz
16:44:11 - Camera trigger rate: 49.0 Hz
16:44:32 - Checking for high voltage locked pixels...
16:45:02 - Checking for high voltage locked pixels...
16:45:18 - Status: TibState.Running ConnectionStatus: True
16:45:18 - Alarms: AlarmVector.ReadError
16:45:18 - Temperature: 37.88
16:45:18 - Local camera rate: 0.0 Hz
16:45:18 - Stereo trigger rate: 0.0 Hz
16:45:18 - SPE trigger rate: 0.0 Hz
16:45:18 - Calibration trigger rate: 0.0 Hz
16:45:18 - Software trigger rate: 0.0 Hz
16:45:18 - Pedestal trigger rate: 1.0 Hz
16:45:18 - Collected trigger rate: 26.0 Hz
16:45:18 - Busy rate: 0.0 Hz
16:45:18 - Camera trigger rate: 26.0 Hz
16:45:32 - Checking for high voltage locked pixels...
16:46:02 - Checking for high voltage locked pixels...
16:46:04 - Stopping TIB...
16:46:04 - Status: TibState.Running
16:46:04 - Alarms: AlarmVector.ReadError
16:46:04 - Connection status: True
16:46:04 - Disabling trigger
16:46:04 - Disabling PPS
16:46:05 - Status: TibState.PpsStopped
16:46:05 - Alarms: AlarmVector.ReadError
16:46:05 - Connection status: True
16:46:05 - Closing TIB connection to camera server
16:46:08 - Status: TibState.PpsStopped
16:46:08 - Alarms: AlarmVector.ReadError
16:46:08 - Connection status: False
16:46:08 - Run duration: 0:04:12
16:46:08 - Local camera triggers: 0
16:46:08 - Slow control triggers: 0
16:46:08 - Single photo-electron triggers: 0
16:46:08 - Calibration triggers: 0
16:46:08 - Software triggers from UCTS: 0
16:46:08 - Pedestal triggers: 252
16:46:08 - Collected input triggers: 6801
16:46:08 - Busy triggers: 435
16:46:08 - Camera event triggers sent to clusters: 6366