13:00:28 - Starting task "Configure modules" 13:00:28 - Setting L0 thresholds to 20.0 p.e. per pixel using L0 slopes and offsets in /local/home/cta_test_bench/data/2019/20190328/l0_threshold_slope_and_offset.h5 13:00:28 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20190910/config_2019-09-10_13-00-28.NMC.xml 13:00:28 - Switching off high voltages in configuration 13:00:32 - Successfully configured 61 module(s) 13:00:38 - NMC is in state NmcState.Configured and knows of 61 drawer(s) 13:00:39 - Found PPS errors: 255 in drawer 128, 255 in drawer 129, 255 in drawer 130, 255 in drawer 131, 255 in drawer 132, 255 in drawer 133, 255 in drawer 134, 255 in drawer 135, 255 in drawer 136 13:00:39 - Finished task "Configure modules" 13:01:04 - Starting task "Switch HVPA voltage state" 13:01:04 - Setting HVPA current limit to 12489.75 uA 13:01:25 - Setting HVPA ramp speed to 25 V/s 13:01:27 - Switching HVPA to state Nominal 13:01:36 - Setting HVPA current limits... 13:02:02 - Finished task "Switch HVPA voltage state" 13:02:57 - High voltage locked channels will be checked every 30 s 13:02:59 - Starting task "Check high voltages" 13:03:00 - Found 61 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state 13:03:10 - Actual voltage is between 152.50 V and 1166.93 V. 13:03:11 - Low voltages range between 300.00 V and 300.00 V. 13:03:21 - Reference voltages range between 0.00 V and 1167.15 V. 13:03:28 - Checking for high voltage locked pixels... 13:03:28 - Module 63 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:03:28 - Module 65 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:03:28 - Module 66 has 1 pixel(s) locked (HVPA status of 0x6f)! 13:03:28 - Module 78 has 1 pixel(s) locked (HVPA status of 0x77)! 13:03:28 - Module 79 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:03:28 - Module 81 has 2 pixel(s) locked (HVPA status of 0x6b)! 13:03:28 - Module 82 has 2 pixel(s) locked (HVPA status of 0x75)! 13:03:28 - Module 83 has 1 pixel(s) locked (HVPA status of 0x77)! 13:03:28 - Module 95 has 1 pixel(s) locked (HVPA status of 0x7e)! 13:03:28 - Module 96 has 2 pixel(s) locked (HVPA status of 0x3b)! 13:03:28 - Module 98 has 2 pixel(s) locked (HVPA status of 0x4f)! 13:03:28 - Module 99 has 1 pixel(s) locked (HVPA status of 0x77)! 13:03:28 - Module 100 has 2 pixel(s) locked (HVPA status of 0x1f)! 13:03:28 - Module 111 has 2 pixel(s) locked (HVPA status of 0x3d)! 13:03:28 - Module 113 has 2 pixel(s) locked (HVPA status of 0x76)! 13:03:28 - Module 114 has 2 pixel(s) locked (HVPA status of 0x3e)! 13:03:28 - Module 115 has 2 pixel(s) locked (HVPA status of 0x57)! 13:03:28 - Module 118 has 2 pixel(s) locked (HVPA status of 0x67)! 13:03:28 - Module 128 has 1 pixel(s) locked (HVPA status of 0x7b)! 13:03:29 - Module 129 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:03:29 - Module 133 has 1 pixel(s) locked (HVPA status of 0x6f)! 13:03:29 - Module 134 has 2 pixel(s) locked (HVPA status of 0x76)! 13:03:29 - Module 135 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:03:29 - Module 136 has 1 pixel(s) locked (HVPA status of 0x7b)! 13:03:29 - Module 146 has 1 pixel(s) locked (HVPA status of 0x7b)! 13:03:29 - Module 148 has 2 pixel(s) locked (HVPA status of 0x2f)! 13:03:29 - Module 149 has 1 pixel(s) locked (HVPA status of 0x6f)! 13:03:29 - Module 153 has 2 pixel(s) locked (HVPA status of 0x5e)! 13:03:29 - Module 165 has 1 pixel(s) locked (HVPA status of 0x7d)! 13:03:29 - Module 166 has 2 pixel(s) locked (HVPA status of 0x5b)! 13:03:29 - Module 170 has 2 pixel(s) locked (HVPA status of 0x6d)! 13:03:29 - Module 182 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:03:29 - Module 198 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:03:29 - Module 200 has 1 pixel(s) locked (HVPA status of 0x7b)! 13:03:30 - Unlocking 49 channel(s)... 13:03:30 - Resetting HVPA channel 6 of drawer 63... 13:03:30 - Resetting HVPA channel 6 of drawer 65... 13:03:30 - Resetting HVPA channel 4 of drawer 66... 13:03:30 - Resetting HVPA channel 3 of drawer 78... 13:03:31 - Resetting HVPA channel 5 of drawer 79... 13:03:31 - Resetting HVPA channel 2 of drawer 81... 13:03:31 - Resetting HVPA channel 4 of drawer 81... 13:03:31 - Resetting HVPA channel 1 of drawer 82... 13:03:31 - Resetting HVPA channel 3 of drawer 82... 13:03:32 - Resetting HVPA channel 3 of drawer 83... 13:03:32 - Resetting HVPA channel 0 of drawer 95... 13:03:32 - Resetting HVPA channel 2 of drawer 96... 13:03:32 - Resetting HVPA channel 6 of drawer 96... 13:03:33 - Resetting HVPA channel 4 of drawer 98... 13:03:33 - Resetting HVPA channel 5 of drawer 98... 13:03:33 - Resetting HVPA channel 3 of drawer 99... 13:03:33 - Resetting HVPA channel 5 of drawer 100... 13:03:34 - Resetting HVPA channel 6 of drawer 100... 13:03:34 - Resetting HVPA channel 1 of drawer 111... 13:03:34 - Resetting HVPA channel 6 of drawer 111... 13:03:34 - Resetting HVPA channel 0 of drawer 113... 13:03:35 - Resetting HVPA channel 3 of drawer 113... 13:03:35 - Resetting HVPA channel 0 of drawer 114... 13:03:35 - Resetting HVPA channel 6 of drawer 114... 13:03:35 - Resetting HVPA channel 3 of drawer 115... 13:03:36 - Resetting HVPA channel 5 of drawer 115... 13:03:36 - Resetting HVPA channel 3 of drawer 118... 13:03:36 - Resetting HVPA channel 4 of drawer 118... 13:03:36 - Resetting HVPA channel 2 of drawer 128... 13:03:36 - Resetting HVPA channel 5 of drawer 129... 13:03:37 - Resetting HVPA channel 4 of drawer 133... 13:03:37 - Resetting HVPA channel 0 of drawer 134... 13:03:37 - Resetting HVPA channel 3 of drawer 134... 13:03:37 - Resetting HVPA channel 5 of drawer 135... 13:03:38 - Resetting HVPA channel 2 of drawer 136... 13:03:38 - Resetting HVPA channel 2 of drawer 146... 13:03:38 - Resetting HVPA channel 4 of drawer 148... 13:03:38 - Resetting HVPA channel 6 of drawer 148... 13:03:39 - Resetting HVPA channel 4 of drawer 149... 13:03:39 - Resetting HVPA channel 0 of drawer 153... 13:03:39 - Resetting HVPA channel 5 of drawer 153... 13:03:39 - Resetting HVPA channel 1 of drawer 165... 13:03:39 - Resetting HVPA channel 2 of drawer 166... 13:03:40 - Resetting HVPA channel 5 of drawer 166... 13:03:40 - Resetting HVPA channel 1 of drawer 170... 13:03:40 - Resetting HVPA channel 4 of drawer 170... 13:03:40 - Resetting HVPA channel 6 of drawer 182... 13:03:41 - Resetting HVPA channel 6 of drawer 198... 13:03:41 - Resetting HVPA channel 2 of drawer 200... 13:03:31 - Maximum difference between expected and actual voltages is 150.67 V 13:03:37 - Maximum of current limits is 12489.75 uA 13:03:37 - Checking status of HVPA module in 61 drawer(s)... 13:03:37 - HVPA module in drawer 134 has a status of 0x77! 13:03:37 - HVPA module in drawer 135 has a status of 0x5f! 13:03:37 - HVPA module in drawer 136 has a status of 0x7b! 13:03:37 - HVPA module in drawer 146 has a status of 0x7b! 13:03:37 - HVPA module in drawer 148 has a status of 0x2f! 13:03:37 - HVPA module in drawer 149 has a status of 0x6f! 13:03:37 - HVPA module in drawer 153 has a status of 0x5e! 13:03:37 - HVPA module in drawer 165 has a status of 0x7d! 13:03:37 - HVPA module in drawer 166 has a status of 0x5b! 13:03:37 - HVPA module in drawer 170 has a status of 0x6d! 13:03:37 - HVPA module in drawer 182 has a status of 0x3f! 13:03:37 - HVPA module in drawer 198 has a status of 0x3f! 13:03:37 - HVPA module in drawer 200 has a status of 0x7b! 13:03:37 - Checking status of HVPA channels in 61 drawer(s)... 13:03:38 - HVPA channel 0 of drawer 153 has status 0x8003! 13:03:39 - HVPA channel 1 of drawer 165 has status 0x8003! 13:03:39 - HVPA channel 1 of drawer 170 has status 0x8003! 13:03:39 - HVPA channel 2 of drawer 166 has status 0x8003! 13:03:39 - HVPA channel 2 of drawer 200 has status 0x8003! 13:03:42 - HV is locked in 5 channel(s), was in rise default in 0 channel(s) and was still in progress in 44 channel(s) 13:03:42 - Resetting 5 channel(s)... 13:03:42 - Resetting HVPA channel 0 of drawer 153... 13:03:43 - Resetting HVPA channel 1 of drawer 165... 13:03:44 - Resetting HVPA channel 1 of drawer 170... 13:03:45 - Resetting HVPA channel 2 of drawer 166... 13:03:45 - Resetting HVPA channel 2 of drawer 200... 13:03:56 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20190909/config_61modules_missingFlatConnector.NMC.xml 13:03:58 - Checking for high voltage locked pixels... 13:03:58 - Module 113 has 1 pixel(s) locked (HVPA status of 0x77)! 13:03:58 - Module 118 has 1 pixel(s) locked (HVPA status of 0x77)! 13:03:58 - Module 128 has 1 pixel(s) locked (HVPA status of 0x7b)! 13:03:59 - Module 133 has 1 pixel(s) locked (HVPA status of 0x6f)! 13:03:59 - Module 134 has 1 pixel(s) locked (HVPA status of 0x77)! 13:03:59 - Module 135 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:03:59 - Module 136 has 1 pixel(s) locked (HVPA status of 0x7b)! 13:03:59 - Module 153 has 1 pixel(s) locked (HVPA status of 0x7e)! 13:03:59 - Module 166 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:03:59 - Module 170 has 2 pixel(s) locked (HVPA status of 0x6d)! 13:03:59 - Module 182 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:03:59 - Unlocking 12 channel(s)... 13:03:59 - Resetting HVPA channel 3 of drawer 113... 13:04:00 - Resetting HVPA channel 3 of drawer 118... 13:04:00 - Resetting HVPA channel 2 of drawer 128... 13:04:00 - Resetting HVPA channel 4 of drawer 133... 13:04:00 - Resetting HVPA channel 3 of drawer 134... 13:04:01 - Resetting HVPA channel 5 of drawer 135... 13:04:01 - Resetting HVPA channel 2 of drawer 136... 13:04:01 - Resetting HVPA channel 0 of drawer 153... 13:04:01 - Resetting HVPA channel 5 of drawer 166... 13:04:02 - Resetting HVPA channel 1 of drawer 170... 13:04:02 - Resetting HVPA channel 4 of drawer 170... 13:04:02 - Resetting HVPA channel 6 of drawer 182... 13:03:58 - Reference voltage of channel 3 in drawer #113: expected 1045.15, read 0.00 13:03:59 - Reference voltage of channel 3 in drawer #118: expected 1056.16, read 0.00 13:03:59 - Reference voltage of channel 2 in drawer #128: expected 1015.33, read 0.00 13:03:59 - Reference voltage of channel 4 in drawer #133: expected 983.17, read 0.00 13:04:00 - Reference voltage of channel 3 in drawer #134: expected 1027.08, read 0.00 13:04:00 - Reference voltage of channel 5 in drawer #135: expected 1003.41, read 0.00 13:04:00 - Reference voltage of channel 2 in drawer #136: expected 1021.77, read 0.00 13:04:00 - Reference voltage of channel 0 in drawer #153: expected 1003.90, read 0.00 13:04:01 - Reference voltage of channel 5 in drawer #166: expected 1011.71, read 0.00 13:04:01 - Reference voltage of channel 1 in drawer #170: expected 1087.78, read 0.00 13:04:01 - Reference voltage of channel 4 in drawer #170: expected 1106.74, read 0.00 13:04:01 - Reference voltage of channel 6 in drawer #182: expected 1032.69, read 0.00 13:04:02 - Done 13:04:03 - Finished task "Check high voltages" 13:04:28 - Checking for high voltage locked pixels... 13:04:29 - Module 153 has 1 pixel(s) locked (HVPA status of 0x7e)! 13:04:29 - Module 166 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:04:29 - Module 170 has 1 pixel(s) locked (HVPA status of 0x6f)! 13:04:29 - Module 182 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:04:29 - Unlocking 4 channel(s)... 13:04:29 - Resetting HVPA channel 0 of drawer 153... 13:04:30 - Resetting HVPA channel 5 of drawer 166... 13:04:30 - Resetting HVPA channel 4 of drawer 170... 13:04:30 - Resetting HVPA channel 6 of drawer 182... 13:04:58 - Checking for high voltage locked pixels... 13:04:59 - Module 153 has 1 pixel(s) locked (HVPA status of 0x7e)! 13:04:59 - Module 166 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:04:59 - Module 170 has 1 pixel(s) locked (HVPA status of 0x6f)! 13:04:59 - Module 182 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:04:59 - Unlocking 4 channel(s)... 13:04:59 - Resetting HVPA channel 0 of drawer 153... 13:05:00 - Resetting HVPA channel 5 of drawer 166... 13:05:00 - Resetting HVPA channel 4 of drawer 170... 13:05:00 - Resetting HVPA channel 6 of drawer 182... 13:05:12 - Stopping flashes... 13:05:12 - No server with URI='NectarCAM:CalibrationBox' has been discovered. The client could not discover a single server. 13:05:28 - Checking for high voltage locked pixels... 13:05:29 - Module 153 has 1 pixel(s) locked (HVPA status of 0x7e)! 13:05:29 - Module 166 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:05:29 - Module 182 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:05:29 - Unlocking 3 channel(s)... 13:05:29 - Resetting HVPA channel 0 of drawer 153... 13:05:30 - Resetting HVPA channel 5 of drawer 166... 13:05:30 - Resetting HVPA channel 6 of drawer 182... 13:05:34 - Stopping flashes... 13:05:39 - Reconnecting to calibration box... 13:05:39 - Reconnecting to calibration box 13:05:39 - No server with URI='NectarCAM:CalibrationBox' has been discovered. The client could not discover a single server. 13:05:46 - Checking status of calibration box... 13:05:46 - No server with URI='NectarCAM:CalibrationBox' has been discovered. The client could not discover a single server. 13:05:58 - Checking for high voltage locked pixels... 13:05:59 - Module 153 has 1 pixel(s) locked (HVPA status of 0x7e)! 13:05:59 - Module 166 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:05:59 - Module 182 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:05:59 - Unlocking 3 channel(s)... 13:05:59 - Resetting HVPA channel 0 of drawer 153... 13:06:00 - Resetting HVPA channel 5 of drawer 166... 13:06:00 - Resetting HVPA channel 6 of drawer 182... 13:06:03 - Checking status of calibration box... 13:06:03 - No server with URI='NectarCAM:CalibrationBox' has been discovered. The client could not discover a single server. 13:06:28 - Checking for high voltage locked pixels... 13:06:29 - Module 153 has 1 pixel(s) locked (HVPA status of 0x7e)! 13:06:29 - Module 166 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:06:29 - Module 182 has 1 pixel(s) locked (HVPA status of 0x3f)! 13:06:29 - Unlocking 3 channel(s)... 13:06:29 - Resetting HVPA channel 0 of drawer 153... 13:06:30 - Resetting HVPA channel 5 of drawer 166... 13:06:30 - Resetting HVPA channel 6 of drawer 182... 13:06:58 - Checking for high voltage locked pixels... 13:06:59 - Module 166 has 1 pixel(s) locked (HVPA status of 0x5f)! 13:06:59 - Unlocking 1 channel(s)... 13:06:59 - Resetting HVPA channel 5 of drawer 166... 13:07:07 - Checking status of calibration box... 13:07:07 - No server with URI='NectarCAM:CalibrationBox' has been discovered. The client could not discover a single server. 13:07:28 - Checking for high voltage locked pixels... 13:07:58 - Checking for high voltage locked pixels... 13:08:28 - Checking for high voltage locked pixels... 13:08:58 - Checking for high voltage locked pixels... 13:09:01 - Checking status of calibration box... 13:09:02 - Calibration box is configured with 5 leds at a frequency of 1000.0 Hz and a voltage of 10.00 V 13:09:07 - Stopping flashes... 13:09:13 - Starting task "Check high voltages" 13:09:14 - Found 61 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state 13:09:23 - Actual voltage is between 945.50 V and 1166.93 V. 13:09:24 - Low voltages range between 300.00 V and 300.00 V. 13:09:28 - Checking for high voltage locked pixels... 13:09:35 - Reference voltages range between 945.26 V and 1167.15 V. 13:09:45 - Maximum difference between expected and actual voltages is 0.66 V 13:09:50 - Maximum of current limits is 12489.75 uA 13:09:50 - Checking status of HVPA module in 61 drawer(s)... 13:09:51 - Checking status of HVPA channels in 61 drawer(s)... 13:09:55 - HV is stabilized in all channels. 13:09:55 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20190909/config_61modules_missingFlatConnector.NMC.xml 13:09:58 - Checking for high voltage locked pixels... 13:10:01 - Done 13:10:02 - Finished task "Check high voltages" 13:10:04 - Starting NMC 13:10:04 - Clearing PPS error counters 13:10:20 - Configuring calibration box... 13:10:20 - Configuring calibration box with leds=0x358 voltage=10.00 frequency=1000.0/1 central_current=0.0 duration=0 width=1 lemo_out=False fiber1_out=False fiber2_out=False lemo_in=False enabled=False 13:10:24 - Starting flashes... 13:10:28 - Checking for high voltage locked pixels... 13:10:58 - Checking for high voltage locked pixels... 13:11:28 - Checking for high voltage locked pixels... 13:11:58 - Checking for high voltage locked pixels... 13:12:15 - Configuring UCTS 13:12:15 - Configuring TIB... 13:12:15 - Setting TIB forced mode to False 13:12:15 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v 13:12:15 - Status: TibState.RunStopped 13:12:15 - Alarms: AlarmVector.NoAlarm 13:12:15 - Connection status: False 13:12:15 - Disabling PPS 13:12:17 - Status: TibState.PpsStopped 13:12:17 - Alarms: AlarmVector.NoAlarm 13:12:17 - Connection status: False 13:12:17 - Entering set_external_delay 13:12:17 - Setting ExternalDelayLocal to 0.000 ns 13:12:17 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v 13:12:18 - Entering set_external_delay 13:12:18 - Setting ExternalDelayCalibration to 50.000 ns 13:12:18 - Writing 50.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v 13:12:18 - Entering set_external_delay 13:12:18 - Setting ExternalDelaySphe to 150.000 ns 13:12:18 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v 13:12:18 - Setting TIB trigger mode to 0x71 = TriggerMask.SlowControl|Pedestal|Software|Mono 13:12:18 - Writing 113 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v 13:12:18 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v 13:12:18 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v 13:12:18 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v 13:12:18 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v 13:12:18 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v 13:12:18 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v 13:12:18 - Status: TibState.PpsStopped 13:12:18 - Alarms: AlarmVector.NoAlarm 13:12:18 - Connection status: False 13:12:18 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v 13:12:18 - Writing 10 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v 13:12:18 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v 13:12:18 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v 13:12:18 - Writing 10 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v 13:12:18 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v 13:12:18 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v 13:12:18 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v 13:12:18 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v 13:12:18 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v 13:12:21 - Connecting TIB to camera server at 10.10.4.12:222 13:12:21 - Starting TIB... 13:12:21 - Status: TibState.PpsStopped 13:12:21 - Alarms: AlarmVector.NoAlarm 13:12:21 - Connection status: False 13:12:21 - Resetting run 13:12:21 - Wait for UCTS external trigger before enabling trigger... 13:12:21 - Status: TibState.Standby 13:12:21 - Alarms: AlarmVector.NoAlarm 13:12:21 - Connection status: False 13:12:21 - Status: TibState.Standby 13:12:21 - Alarms: AlarmVector.NoAlarm 13:12:21 - Connection status: False 13:12:22 - Status: TibState.CoutingPps 13:12:22 - Alarms: AlarmVector.NoAlarm 13:12:22 - Connection status: True 13:12:26 - Starting TIB triggers... 13:12:26 - Enabling trigger 13:12:26 - Status: TibState.Running 13:12:26 - Alarms: AlarmVector.NoAlarm 13:12:26 - Connection status: True 13:12:28 - Checking for high voltage locked pixels... 13:12:37 - Stopping TIB... 13:12:37 - Status: TibState.Running 13:12:37 - Alarms: AlarmVector.ReadError 13:12:37 - Connection status: True 13:12:37 - Disabling trigger 13:12:37 - Disabling PPS 13:12:38 - Status: TibState.PpsStopped 13:12:38 - Alarms: AlarmVector.ReadError 13:12:38 - Connection status: True 13:12:38 - Closing TIB connection to camera server 13:12:40 - Status: TibState.PpsStopped 13:12:40 - Alarms: AlarmVector.ReadError 13:12:40 - Connection status: False 13:12:41 - Run duration: 0:00:15 13:12:41 - Local camera triggers: 0 13:12:41 - Slow control triggers: 0 13:12:41 - Single photo-electron triggers: 0 13:12:41 - Calibration triggers: 0 13:12:41 - Software triggers from UCTS: 0 13:12:41 - Pedestal triggers: 149 13:12:41 - Collected input triggers: 11260 13:12:41 - Busy triggers: 2 13:12:41 - Camera event triggers sent to clusters: 11258