16:42 - ECC is in state EccState.Safe with status EccStatus.NoError
16:42 - Average temperature: 29.0 deg C
16:42 - Air temperature (T1-T6 and T9-T10): 29.6, 29.5, 27.4, 29.3, 27.4, 26.0, 23.4, 23.2 deg C
16:42 - Air differential pressure: 2.3 Pa
16:42 - Water temperature (T11-T12): 22.0, 21.8 deg C
16:42 - Back doors are closed.
16:42 - Shutter is in state Closed (error 1)
16:42 - Light sensors: [0.01, 0.01, 0.01, 7.16] V
16:42 - Humidity: 36.3 %. Water pressure: [7.44, 8.94] bar.
16:42 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:42 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:42 - ECC is in state EccState.Safe with status EccStatus.NoError
16:42 - Average temperature: 29.0 deg C
16:42 - Air temperature (T1-T6 and T9-T10): 29.6, 29.5, 27.4, 29.3, 27.4, 26.0, 23.4, 23.2 deg C
16:42 - Air differential pressure: 2.2 Pa
16:42 - Water temperature (T11-T12): 22.0, 21.8 deg C
16:42 - Back doors are closed.
16:42 - Shutter is in state Closed (error 1)
16:42 - Light sensors: [0.01, 0.01, 0.01, 7.16] V
16:42 - Humidity: 36.3 %. Water pressure: [7.42, 8.94] bar.
16:42 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:42 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:42 - ECC is in state EccState.Safe with status EccStatus.NoError
16:42 - Average temperature: 29.0 deg C
16:42 - Air temperature (T1-T6 and T9-T10): 29.6, 29.5, 27.4, 29.3, 27.4, 26.0, 23.4, 23.2 deg C
16:42 - Air differential pressure: 2.2 Pa
16:42 - Water temperature (T11-T12): 22.0, 21.8 deg C
16:42 - Back doors are closed.
16:42 - Shutter is in state Closed (error 1)
16:42 - Light sensors: [0.01, 0.01, 0.01, 7.16] V
16:42 - Humidity: 36.3 %. Water pressure: [7.42, 8.94] bar.
16:42 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:42 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:42 - ECC is in state EccState.Safe with status EccStatus.NoError
16:42 - Average temperature: 29.0 deg C
16:42 - Air temperature (T1-T6 and T9-T10): 29.6, 29.5, 27.4, 29.3, 27.4, 26.0, 23.4, 23.2 deg C
16:42 - Air differential pressure: 2.2 Pa
16:42 - Water temperature (T11-T12): 22.0, 21.8 deg C
16:42 - Back doors are closed.
16:42 - Shutter is in state Closed (error 1)
16:42 - Light sensors: [0.01, 0.01, 0.01, 7.16] V
16:42 - Humidity: 36.3 %. Water pressure: [7.44, 8.94] bar.
16:42 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:42 - 24 V power supply no. 1 is enabled with a current of 1.000 A.
16:44 - NMC is in state NmcState.Configured and knows of 61 drawer(s)
16:45 - Found 0 PPS errors.
16:47 - Resetting NMC
16:47 - ECC is in state EccState.Safe with status EccStatus.NoError
16:47 - Average temperature: 28.8 deg C
16:47 - Air temperature (T1-T6 and T9-T10): 29.3, 29.4, 27.4, 29.0, 27.3, 25.9, 23.3, 23.1 deg C
16:47 - Air differential pressure: 2.2 Pa
16:47 - Water temperature (T11-T12): 21.8, 21.7 deg C
16:47 - Back doors are closed.
16:47 - Shutter is in state Closed (error 1)
16:47 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:47 - Humidity: 37.0 %. Water pressure: [7.16, 8.66] bar.
16:47 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:47 - 24 V power supply no. 1 is enabled with a current of 1.030 A.
16:47 - NMC is in state NmcState.Ready and knows of 0 drawer(s)
16:47 - Found 0 PPS errors.
16:49 - Disabling fans
16:49 - Toggling front fans
16:49 - Toggling rear fans
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.4 Pa
16:49 - Water temperature (T11-T12): 21.8, 21.6 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.1, 8.6] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.4 Pa
16:49 - Water temperature (T11-T12): 21.8, 21.6 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.1, 8.6] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.4 Pa
16:49 - Water temperature (T11-T12): 21.8, 21.6 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.1, 8.6] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.3 Pa
16:49 - Water temperature (T11-T12): 21.7, 21.6 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.08, 8.58] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.2 Pa
16:49 - Water temperature (T11-T12): 21.6, 21.6 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.08, 8.58] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 1.020 A.
16:49 - Enabling fans
16:49 - Toggling front fans
16:49 - Toggling rear fans
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.3 Pa
16:49 - Water temperature (T11-T12): 21.6, 21.5 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.08, 8.58] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.3 Pa
16:49 - Water temperature (T11-T12): 21.6, 21.5 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.06, 8.6] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.3, 29.0, 27.3, 25.8, 23.3, 23.1 deg C
16:49 - Air differential pressure: 2.3 Pa
16:49 - Water temperature (T11-T12): 21.6, 21.5 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.06, 8.6] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:49 - Disabling fans
16:49 - Toggling front fans
16:49 - Toggling rear fans
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.2, 29.1, 27.3, 25.9, 23.3, 23.0 deg C
16:49 - Air differential pressure: 2.4 Pa
16:49 - Water temperature (T11-T12): 21.5, 21.4 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.06, 8.56] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.2, 29.1, 27.3, 25.9, 23.3, 23.0 deg C
16:49 - Air differential pressure: 2.2 Pa
16:49 - Water temperature (T11-T12): 21.5, 21.4 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.06, 8.56] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 1.000 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.2, 29.1, 27.3, 25.9, 23.3, 23.0 deg C
16:49 - Air differential pressure: 2.2 Pa
16:49 - Water temperature (T11-T12): 21.5, 21.4 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.06, 8.56] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 1.000 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.2, 29.1, 27.3, 25.9, 23.3, 23.0 deg C
16:49 - Air differential pressure: 2.4 Pa
16:49 - Water temperature (T11-T12): 21.5, 21.4 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.06, 8.56] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:49 - ECC is in state EccState.Safe with status EccStatus.NoError
16:49 - Average temperature: 28.7 deg C
16:49 - Air temperature (T1-T6 and T9-T10): 29.2, 29.4, 27.2, 29.1, 27.3, 25.9, 23.3, 23.0 deg C
16:49 - Air differential pressure: 2.4 Pa
16:49 - Water temperature (T11-T12): 21.5, 21.4 deg C
16:49 - Back doors are closed.
16:49 - Shutter is in state Closed (error 1)
16:49 - Light sensors: [0.01, 0.01, 0.01, 7.11] V
16:49 - Humidity: 37.1 %. Water pressure: [7.06, 8.56] bar.
16:49 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:49 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:51 - ECC is in state EccState.Safe with status EccStatus.NoError
16:51 - Average temperature: 28.7 deg C
16:51 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.5, 26.2, 23.5, 23.3 deg C
16:51 - Air differential pressure: 2.3 Pa
16:51 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:51 - Back doors are closed.
16:51 - Shutter is in state Closed (error 1)
16:51 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:51 - Humidity: 37.0 %. Water pressure: [6.84, 8.34] bar.
16:51 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:51 - 24 V power supply no. 1 is enabled with a current of 0.970 A.
16:51 - ECC is in state EccState.Safe with status EccStatus.NoError
16:51 - Average temperature: 28.7 deg C
16:51 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.5, 26.2, 23.5, 23.3 deg C
16:51 - Air differential pressure: 2.3 Pa
16:51 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:51 - Back doors are closed.
16:51 - Shutter is in state Closed (error 1)
16:51 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:51 - Humidity: 37.0 %. Water pressure: [6.84, 8.34] bar.
16:51 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:51 - 24 V power supply no. 1 is enabled with a current of 0.970 A.
16:52 - Enabling fans
16:52 - Toggling front fans
16:52 - Toggling rear fans
16:52 - Disabling fans
16:52 - Toggling front fans
16:52 - Toggling rear fans
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.2 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.7 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.32] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.020 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.2 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.7 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.32] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.020 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.3 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.000 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.3 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.000 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.4 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.4 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.5, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.4 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.4 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 37.0 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.020 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.2 Pa
16:52 - Water temperature (T11-T12): 20.9, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 36.9 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 0.960 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.2 Pa
16:52 - Water temperature (T11-T12): 20.9, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 36.9 %. Water pressure: [6.8, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.2 Pa
16:52 - Water temperature (T11-T12): 20.9, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 36.9 %. Water pressure: [6.78, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.020 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.9, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.2 Pa
16:52 - Water temperature (T11-T12): 20.9, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 36.9 %. Water pressure: [6.78, 8.3] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.020 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.8, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.3 Pa
16:52 - Water temperature (T11-T12): 20.9, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 36.9 %. Water pressure: [6.78, 8.28] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.8, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.3 Pa
16:52 - Water temperature (T11-T12): 20.9, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.12] V
16:52 - Humidity: 36.9 %. Water pressure: [6.78, 8.28] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.8, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.3 Pa
16:52 - Water temperature (T11-T12): 20.9, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.13] V
16:52 - Humidity: 36.9 %. Water pressure: [6.78, 8.28] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 0.970 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.8, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.5 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.13] V
16:52 - Humidity: 36.9 %. Water pressure: [6.78, 8.28] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 0.990 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.8, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.5 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.8 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.13] V
16:52 - Humidity: 36.9 %. Water pressure: [6.76, 8.28] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:52 - ECC is in state EccState.Safe with status EccStatus.NoError
16:52 - Average temperature: 28.8 deg C
16:52 - Air temperature (T1-T6 and T9-T10): 29.5, 29.1, 26.8, 29.6, 27.6, 26.3, 23.5, 23.3 deg C
16:52 - Air differential pressure: 2.4 Pa
16:52 - Water temperature (T11-T12): 20.8, 20.7 deg C
16:52 - Back doors are closed.
16:52 - Shutter is in state Closed (error 1)
16:52 - Light sensors: [0.01, 0.01, 0.01, 7.13] V
16:52 - Humidity: 36.9 %. Water pressure: [6.76, 8.28] bar.
16:52 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
16:52 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
16:52 - Enabling fans
16:52 - Toggling front fans
16:52 - Toggling rear fans
17:14 - ECC is in state EccState.Safe with status EccStatus.NoError
17:14 - Average temperature: 28.0 deg C
17:14 - Air temperature (T1-T6 and T9-T10): 28.4, 28.7, 26.8, 28.2, 26.7, 25.3, 22.7, 22.4 deg C
17:14 - Air differential pressure: 2.3 Pa
17:14 - Water temperature (T11-T12): 21.1, 21.0 deg C
17:14 - Back doors are closed.
17:14 - Shutter is in state Closed (error 1)
17:14 - Light sensors: [0.01, 0.01, 0.01, 7.0] V
17:14 - Humidity: 38.9 %. Water pressure: [6.1, 7.62] bar.
17:14 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
17:14 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
17:26 - No server with URI='urn:NI-cRIO-9068-01d06bf6-MST-CEA:UnifiedAutomation:UaServerCpp' has been discovered. The client could not discover a single server.
17:27 - ECC is in state EccState.Monitoring with status EccStatus.NoError
17:27 - Average temperature: 0.0 deg C
17:27 - Air temperature (T1-T6 and T9-T10): 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 deg C
17:27 - Air differential pressure: 0.0 Pa
17:27 - Water temperature (T11-T12): 0.0, 0.0 deg C
17:27 - Back doors are open.
17:27 - Shutter is in state PartiallyOpen (error 1)
17:27 - Light sensors: [0.0, 0.0, 0.0, 0.0] V
17:27 - Humidity: 0.0 %. Water pressure: [0.0, 0.0] bar.
17:27 - Fan speeds: [1.0, 1.0, 1.0, 1.0, 1.0, 1.0] rpm
17:27 - 24 V power supply no. 1 is disabled with a current of 1.000 A.
17:27 - ECC is in state EccState.Monitoring with status EccStatus.NoError
17:27 - Average temperature: 0.0 deg C
17:27 - Air temperature (T1-T6 and T9-T10): 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 deg C
17:27 - Air differential pressure: 0.0 Pa
17:27 - Water temperature (T11-T12): 0.0, 0.0 deg C
17:27 - Back doors are open.
17:27 - Shutter is in state PartiallyOpen (error 1)
17:27 - Light sensors: [0.0, 0.0, 0.0, 0.0] V
17:27 - Humidity: 0.0 %. Water pressure: [0.0, 0.0] bar.
17:27 - Fan speeds: [1.0, 1.0, 1.0, 1.0, 1.0, 1.0] rpm
17:27 - 24 V power supply no. 1 is disabled with a current of 1.000 A.
17:27 - ECC is in state EccState.Monitoring with status EccStatus.NoError
17:27 - Average temperature: 0.0 deg C
17:27 - Air temperature (T1-T6 and T9-T10): 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 deg C
17:27 - Air differential pressure: 0.0 Pa
17:27 - Water temperature (T11-T12): 0.0, 0.0 deg C
17:27 - Back doors are open.
17:27 - Shutter is in state PartiallyOpen (error 1)
17:27 - Light sensors: [0.0, 0.0, 0.0, 0.0] V
17:27 - Humidity: 0.0 %. Water pressure: [0.0, 0.0] bar.
17:27 - Fan speeds: [1.0, 1.0, 1.0, 1.0, 1.0, 1.0] rpm
17:27 - 24 V power supply no. 1 is disabled with a current of 1.000 A.
17:27 - ECC is in state EccState.Monitoring with status EccStatus.NoError
17:27 - Average temperature: 0.0 deg C
17:27 - Air temperature (T1-T6 and T9-T10): 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 deg C
17:27 - Air differential pressure: 0.0 Pa
17:27 - Water temperature (T11-T12): 0.0, 0.0 deg C
17:27 - Back doors are open.
17:27 - Shutter is in state PartiallyOpen (error 1)
17:27 - Light sensors: [0.0, 0.0, 0.0, 0.0] V
17:27 - Humidity: 0.0 %. Water pressure: [0.0, 0.0] bar.
17:27 - Fan speeds: [1.0, 1.0, 1.0, 1.0, 1.0, 1.0] rpm
17:27 - 24 V power supply no. 1 is disabled with a current of 1.000 A.
17:27 - ECC is in state EccState.Monitoring with status EccStatus.NoError
17:27 - Average temperature: 27.6 deg C
17:27 - Air temperature (T1-T6 and T9-T10): 28.1, 28.3, 26.2, 27.9, 26.5, 25.2, 22.6, 22.3 deg C
17:27 - Air differential pressure: 2.1 Pa
17:27 - Water temperature (T11-T12): 20.5, 20.4 deg C
17:27 - Back doors are closed.
17:27 - Shutter is in state Closed (error 1)
17:27 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:27 - Humidity: 39.7 %. Water pressure: [5.66, 7.16] bar.
17:27 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
17:27 - 24 V power supply no. 1 is disabled with a current of 7.880 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.3, 26.2, 27.9, 26.5, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.5, 20.4 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.66, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is disabled with a current of 7.870 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.5, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 3.650 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.5, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 3.650 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.5, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.3 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 960.0, 960.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.040 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.5, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.3 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 960.0, 960.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.040 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 1680.0, 1680.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.000 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 1680.0, 1680.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.000 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.3 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 2400.0, 2400.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.040 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.3 Pa
17:28 - Water temperature (T11-T12): 20.4, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 2400.0, 2400.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.040 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.3 Pa
17:28 - Water temperature (T11-T12): 20.5, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.1, 28.2, 26.2, 27.9, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.3 Pa
17:28 - Water temperature (T11-T12): 20.5, 20.3 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
17:28 - Disabling fans
17:28 - Toggling front fans
17:28 - Toggling rear fans
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.2, 28.2, 26.2, 28.0, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.6, 20.4 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 1200.0, 1080.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.030 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.2, 28.2, 26.2, 28.0, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.6, 20.4 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 1200.0, 1080.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.030 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.2, 28.2, 26.2, 28.0, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.2 Pa
17:28 - Water temperature (T11-T12): 20.6, 20.4 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.16] bar.
17:28 - Fan speeds: [0.0, 0.0, 1200.0, 1080.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.030 A.
17:28 - ECC is in state EccState.Safe with status EccStatus.NoError
17:28 - Average temperature: 27.6 deg C
17:28 - Air temperature (T1-T6 and T9-T10): 28.2, 28.2, 26.2, 28.0, 26.6, 25.2, 22.6, 22.3 deg C
17:28 - Air differential pressure: 2.3 Pa
17:28 - Water temperature (T11-T12): 20.6, 20.4 deg C
17:28 - Back doors are closed.
17:28 - Shutter is in state Closed (error 1)
17:28 - Light sensors: [0.01, 0.01, 0.01, 6.95] V
17:28 - Humidity: 39.7 %. Water pressure: [5.64, 7.14] bar.
17:28 - Fan speeds: [0.0, 0.0, 600.0, 600.0, 0.0, 0.0] rpm
17:28 - 24 V power supply no. 1 is enabled with a current of 1.030 A.
17:28 - Enabling fans
17:28 - Toggling front fans
17:28 - Toggling rear fans
18:03 - Starting task "Prepare ECC"
18:03 - Preparing ECC...
18:03 - Setting ECC temperature range for Ready state to [16.000000, 35.000000]
18:03 - Setting ECC mode to EccState.Ready
18:03 - Received ECC state change notification: EccState.Safe
18:03 - Received ECC state change notification: EccState.Ready
18:03 - Setting power supply box SPE relay to True
18:03 - Unsubscribing
18:03 - Finished task "Prepare ECC"
18:09 - Switching ECC back to Safe state...
18:09 - Powering off modules...
18:09 - Executing command '/opt/cta/bin/cta_ctrl --all --power_off' on Digital Trigger Crate at 10.10.4.57
18:09 - Setting ECC mode to EccState.Safe
23:13 - ECC is in state EccState.Safe with status EccStatus.NoError
23:13 - Average temperature: 22.4 deg C
23:13 - Air temperature (T1-T6 and T9-T10): 22.2, 22.5, 22.5, 22.4, 22.4, 22.2, 21.8, 21.8 deg C
23:13 - Air differential pressure: 1.3 Pa
23:13 - Water temperature (T11-T12): 21.6, 21.5 deg C
23:13 - Back doors are closed.
23:13 - Shutter is in state Closed (error 1)
23:13 - Light sensors: [0.01, 0.01, 0.01, 6.28] V
23:13 - Humidity: 51.0 %. Water pressure: [2.08, 3.58] bar.
23:13 - Fan speeds: [0.0, 0.0, 2400.0, 2400.0, 0.0, 0.0] rpm
23:13 - 24 V power supply no. 1 is enabled with a current of 1.100 A.
23:18 - ECC is in state EccState.Safe with status EccStatus.NoError
23:18 - Average temperature: 22.3 deg C
23:18 - Air temperature (T1-T6 and T9-T10): 22.2, 22.4, 22.4, 22.4, 22.3, 22.1, 21.3, 21.0 deg C
23:18 - Air differential pressure: 1.5 Pa
23:18 - Water temperature (T11-T12): 19.8, 19.8 deg C
23:18 - Back doors are closed.
23:18 - Shutter is in state Closed (error 1)
23:18 - Light sensors: [0.01, 0.01, 0.01, 6.27] V
23:18 - Humidity: 51.1 %. Water pressure: [1.72, 3.2] bar.
23:18 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
23:18 - 24 V power supply no. 1 is enabled with a current of 1.140 A.
23:21 - Starting task "Prepare ECC"
23:21 - Preparing ECC...
23:21 - Setting ECC temperature range for Ready state to [16.000000, 35.000000]
23:21 - Setting ECC mode to EccState.Ready
23:21 - Received ECC state change notification: EccState.Safe
23:21 - Received ECC state change notification: EccState.Ready
23:21 - Setting power supply box SPE relay to True
23:21 - Unsubscribing
23:21 - Finished task "Prepare ECC"
23:23 - Starting task "Powering modules..."
23:23 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --all --power_on' on Digital Trigger Crate at 10.10.4.57
23:23 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --all --power_on' on Digital Trigger Crate at 10.10.4.57
23:23 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --all --power_on' on Digital Trigger Crate at 10.10.4.57
23:23 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --all --power_on' on Digital Trigger Crate at 10.10.4.57
23:23 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --all --power_on' on Digital Trigger Crate at 10.10.4.57
23:23 - Finished task "Powering modules..."
23:24 - ECC is in state EccState.Ready with status EccStatus.NoError
23:24 - Average temperature: 22.2 deg C
23:24 - Air temperature (T1-T6 and T9-T10): 22.1, 22.3, 22.2, 22.2, 22.1, 21.6, 20.1, 19.3 deg C
23:24 - Air differential pressure: 1.6 Pa
23:24 - Water temperature (T11-T12): 17.3, 17.3 deg C
23:24 - Back doors are closed.
23:24 - Shutter is in state Closed (error 1)
23:24 - Light sensors: [0.01, 0.01, 0.01, 6.26] V
23:24 - Humidity: 51.2 %. Water pressure: [1.46, 2.92] bar.
23:24 - Fan speeds: [0.0, 0.0, 2280.0, 2160.0, 0.0, 0.0] rpm
23:24 - 24 V power supply no. 1 is enabled with a current of 58.900 A.
23:24 - ECC is in state EccState.Ready with status EccStatus.NoError
23:24 - Average temperature: 22.2 deg C
23:24 - Air temperature (T1-T6 and T9-T10): 22.1, 22.3, 22.2, 22.2, 22.1, 21.6, 20.0, 19.2 deg C
23:24 - Air differential pressure: 1.8 Pa
23:24 - Water temperature (T11-T12): 17.2, 17.2 deg C
23:24 - Back doors are closed.
23:24 - Shutter is in state Closed (error 1)
23:24 - Light sensors: [0.01, 0.01, 0.01, 6.26] V
23:24 - Humidity: 51.2 %. Water pressure: [1.46, 2.94] bar.
23:24 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
23:24 - 24 V power supply no. 1 is enabled with a current of 59.000 A.
23:24 - Starting task "Configure modules"
23:24 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20190529/config_61modules_cameraqm_noisy_pixs_disabeled.NMC.xml
23:24 - Switching off high voltages in configuration
23:24 - Successfully configured 61 module(s)
23:24 - NMC is in state NmcState.Configured and knows of 61 drawer(s)
23:24 - Found 0 PPS errors.
23:24 - Finished task "Configure modules"
23:24 - Starting NMC
23:24 - Clearing PPS error counters
23:27 - Configuring UCTS
23:27 - Configuring TIB...
23:27 - Setting TIB forced mode to False
23:27 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
23:27 - Status: TibState.RunStopped
23:27 - Alarms: AlarmVector.NoAlarm
23:27 - Connection status: False
23:27 - Disabling PPS
23:27 - Status: TibState.PpsStopped
23:27 - Alarms: AlarmVector.NoAlarm
23:27 - Connection status: False
23:27 - Entering set_external_delay
23:27 - Setting ExternalDelayLocal to 0.000 ns
23:27 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
23:27 - Entering set_external_delay
23:27 - Setting ExternalDelayCalibration to 78.000 ns
23:27 - Writing 78.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
23:27 - Entering set_external_delay
23:27 - Setting ExternalDelaySphe to 150.000 ns
23:27 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
23:27 - Setting TIB trigger mode to 0x71 = TriggerMask.SlowControl|Pedestal|Software|Mono
23:27 - Writing 113 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
23:27 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
23:27 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
23:27 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
23:27 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
23:27 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
23:27 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
23:27 - Status: TibState.PpsStopped
23:27 - Alarms: AlarmVector.NoAlarm
23:27 - Connection status: False
23:27 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
23:27 - Writing 1000 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
23:27 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
23:27 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
23:27 - Writing 1000 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
23:27 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
23:27 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
23:27 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
23:27 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
23:27 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
23:27 - Stopping flashes...
23:27 - Stopping flashes...
23:27 - Failed to call Stop: Bad statuses are present
23:36 - Starting task "Set L0 trigger thresholds"
23:36 - Setting L0 thresholds to 1.5 p.e.
23:37 - Setting L0 thresholds to 1.5 p.e. per pixel using L0 slopes and offsets in /local/home/cta_test_bench/data/2019/20190328/l0_threshold_slope_and_offset.h5
23:37 - Thresholds saved in configuration file /local/home/cta_test_bench/config/2019/20190619/config_2019-06-19_23-37-15.NMC.xml
23:37 - Finished task "Set L0 trigger thresholds"
23:38 - ECC is in state EccState.Ready with status EccStatus.NoError
23:38 - Average temperature: 22.2 deg C
23:38 - Air temperature (T1-T6 and T9-T10): 22.8, 22.2, 21.5, 22.4, 22.3, 21.7, 17.7, 16.8 deg C
23:38 - Air differential pressure: 2.2 Pa
23:38 - Water temperature (T11-T12): 14.8, 14.7 deg C
23:38 - Back doors are closed.
23:38 - Shutter is in state Closed (error 1)
23:38 - Light sensors: [0.01, 0.01, 0.01, 6.28] V
23:38 - Humidity: 51.1 %. Water pressure: [1.28, 2.76] bar.
23:38 - Fan speeds: [0.0, 0.0, 2280.0, 2400.0, 0.0, 0.0] rpm
23:38 - 24 V power supply no. 1 is enabled with a current of 57.900 A.
23:42 - ECC is in state EccState.Ready with status EccStatus.NoError
23:42 - Average temperature: 22.2 deg C
23:42 - Air temperature (T1-T6 and T9-T10): 23.0, 22.1, 21.4, 22.5, 22.3, 21.7, 17.4, 16.6 deg C
23:42 - Air differential pressure: 2.0 Pa
23:42 - Water temperature (T11-T12): 14.7, 14.6 deg C
23:42 - Back doors are closed.
23:42 - Shutter is in state Closed (error 1)
23:42 - Light sensors: [0.01, 0.01, 0.01, 6.28] V
23:42 - Humidity: 50.9 %. Water pressure: [1.28, 2.74] bar.
23:42 - Fan speeds: [0.0, 0.0, 2280.0, 2160.0, 0.0, 0.0] rpm
23:42 - 24 V power supply no. 1 is enabled with a current of 57.900 A.
23:45 - Starting task "Switch HVPA voltage state"
23:45 - Setting HVPA current limit to 12489.75 uA
23:46 - Setting HVPA ramp speed to 25 V/s
23:46 - Switching HVPA to state Nominal
23:46 - Setting HVPA current limits...
23:46 - Finished task "Switch HVPA voltage state"
23:46 - Starting task "Check high voltages"
23:46 - Found 61 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
23:47 - Actual voltage is between 18.91 V and 1166.93 V.
23:47 - Low voltages range between 100.00 V and 100.00 V. 
23:47 - Reference voltages range between 0.00 V and 1167.15 V. 
23:47 - Maximum difference between expected and actual voltages is 11.59 V
23:47 - Maximum of current limits is 5647.07 uA
23:47 - Checking status of HVPA module in 61 drawer(s)...
23:47 - HVPA module in drawer 83 has a status of 0x77!
23:47 - HVPA module in drawer 111 has a status of 0x7d!
23:47 - Checking status of HVPA channels in 61 drawer(s)...
23:47 - HVPA channel 1 of drawer 111 has status 0x8003!
23:47 - HVPA channel 3 of drawer 83 has status 0x8003!
23:47 - HV is locked in 2 channel(s), was in rise default in 0 channel(s) and was still in progress in 0 channel(s)
23:47 - Resetting 2 channel(s)...
23:47 - Resetting HVPA channel 1 of drawer 111...
23:47 - Resetting HVPA channel 3 of drawer 83...
23:47 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20190529/config_61modules_cameraqm_noisy_pixs_disabeled.NMC.xml
23:47 - High voltage locked channels will be checked every 30 s
23:47 - Done
23:47 - Finished task "Check high voltages"
23:48 - Checking for high voltage locked pixels...
23:48 - Starting task "Check high voltages"
23:48 - Found 61 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
23:48 - Actual voltage is between 944.89 V and 1167.54 V.
23:48 - Low voltages range between 100.00 V and 100.00 V. 
23:48 - Reference voltages range between 945.26 V and 1167.15 V. 
23:48 - Checking for high voltage locked pixels...
23:49 - Maximum difference between expected and actual voltages is 1.02 V
23:49 - NMC is in state NmcState.Running and knows of 61 drawer(s)
23:49 - Found 0 PPS errors.
23:49 - Maximum of current limits is 5647.07 uA
23:49 - Checking status of HVPA module in 61 drawer(s)...
23:49 - Checking status of HVPA channels in 61 drawer(s)...
23:49 - HV is stabilized in all channels.
23:49 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20190529/config_61modules_cameraqm_noisy_pixs_disabeled.NMC.xml
23:49 - Done
23:49 - Finished task "Check high voltages"
23:49 - Checking for high voltage locked pixels...
23:49 - Checking for high voltage locked pixels...
23:50 - Checking for high voltage locked pixels...
23:50 - Checking for high voltage locked pixels...
23:51 - Checking for high voltage locked pixels...
23:51 - Checking for high voltage locked pixels...
23:52 - Checking for high voltage locked pixels...
23:52 - Checking for high voltage locked pixels...
23:53 - Checking for high voltage locked pixels...
23:53 - Checking for high voltage locked pixels...
23:54 - Checking for high voltage locked pixels...
23:54 - Connecting TIB to camera server at 10.10.4.12:222
23:54 - Starting TIB...
23:54 - Status: TibState.PpsStopped
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Connection status: False
23:54 - Resetting run
23:54 - Wait for UCTS external trigger before enabling trigger...
23:54 - Status: TibState.Standby
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Connection status: False
23:54 - Status: TibState.Standby
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Connection status: False
23:54 - Status: TibState.Armed
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Connection status: True
23:54 - Starting TIB triggers...
23:54 - Enabling trigger
23:54 - Status: TibState.Running
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Connection status: True
23:54 - Status: TibState.Running ConnectionStatus: True
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Temperature: 37.12
23:54 - Local camera rate: 0.0 Hz
23:54 - Stereo trigger rate: 0.0 Hz
23:54 - SPE trigger rate: 0.0 Hz
23:54 - Calibration trigger rate: 0.0 Hz
23:54 - Software trigger rate: 0.0 Hz
23:54 - Pedestal trigger rate: 999.0 Hz
23:54 - Collected trigger rate: 32668.0 Hz
23:54 - Busy rate: 16630.0 Hz
23:54 - Camera trigger rate: 16038.0 Hz
23:54 - Checking for high voltage locked pixels...
23:54 - Stopping TIB...
23:54 - Status: TibState.Running
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Connection status: True
23:54 - Disabling trigger
23:54 - Disabling PPS
23:54 - Status: TibState.PpsStopped
23:54 - Alarms: AlarmVector.NoAlarm
23:54 - Connection status: True
23:54 - Closing TIB connection to camera server
23:54 - Stopping NMC
23:54 - Found 0 PPS errors.
23:55 - Checking for high voltage locked pixels...
23:55 - Checking for high voltage locked pixels...
23:56 - Stopping NMC
23:56 - Found 0 PPS errors.
23:56 - Starting NMC
23:56 - Clearing PPS error counters
23:56 - Checking for high voltage locked pixels...
23:56 - Starting task "Set L0 trigger thresholds"
23:56 - Setting L0 thresholds to 7.0 p.e.
23:56 - Setting L0 thresholds to 7.0 p.e. per pixel using L0 slopes and offsets in /local/home/cta_test_bench/data/2019/20190328/l0_threshold_slope_and_offset.h5
23:56 - Thresholds saved in configuration file /local/home/cta_test_bench/config/2019/20190619/config_2019-06-19_23-56-45.NMC.xml
23:56 - Finished task "Set L0 trigger thresholds"
23:56 - Checking for high voltage locked pixels...
23:57 - Starting NMC
23:57 - Clearing PPS error counters
23:57 - Configuring UCTS
23:57 - Configuring TIB...
23:57 - Setting TIB forced mode to False
23:57 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
23:57 - Status: TibState.PpsStopped
23:57 - Alarms: AlarmVector.NoAlarm
23:57 - Connection status: False
23:57 - Entering set_external_delay
23:57 - Setting ExternalDelayLocal to 0.000 ns
23:57 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
23:57 - Entering set_external_delay
23:57 - Setting ExternalDelayCalibration to 78.000 ns
23:57 - Writing 78.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
23:57 - Entering set_external_delay
23:57 - Setting ExternalDelaySphe to 150.000 ns
23:57 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
23:57 - Setting TIB trigger mode to 0x71 = TriggerMask.SlowControl|Pedestal|Software|Mono
23:57 - Writing 113 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
23:57 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
23:57 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
23:57 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
23:57 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
23:57 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
23:57 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
23:57 - Status: TibState.PpsStopped
23:57 - Alarms: AlarmVector.NoAlarm
23:57 - Connection status: False
23:57 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
23:57 - Writing 1000 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
23:57 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
23:57 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
23:57 - Writing 1000 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
23:57 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
23:57 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
23:57 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
23:57 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
23:57 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
23:57 - Connecting TIB to camera server at 10.10.4.12:222
23:57 - Starting TIB...
23:57 - Status: TibState.PpsStopped
23:57 - Alarms: AlarmVector.NoAlarm
23:57 - Connection status: False
23:57 - Resetting run
23:57 - Wait for UCTS external trigger before enabling trigger...
23:57 - Status: TibState.Standby
23:57 - Alarms: AlarmVector.NoAlarm
23:57 - Connection status: False
23:57 - Status: TibState.Standby
23:57 - Alarms: AlarmVector.NoAlarm
23:57 - Connection status: False
23:57 - Status: TibState.Armed
23:57 - Alarms: AlarmVector.NoAlarm
23:57 - Connection status: True
23:57 - Checking for high voltage locked pixels...
23:57 - Starting TIB triggers...
23:57 - Enabling trigger
23:57 - Status: TibState.Running
23:57 - Alarms: AlarmVector.NoAlarm
23:57 - Connection status: True
23:57 - Checking for high voltage locked pixels...
23:58 - Checking for high voltage locked pixels...
23:58 - Checking for high voltage locked pixels...
23:59 - Checking for high voltage locked pixels...
23:59 - Checking for high voltage locked pixels...
00:00 - Checking for high voltage locked pixels...
00:00 - Checking for high voltage locked pixels...
00:01 - Checking for high voltage locked pixels...
00:01 - Checking for high voltage locked pixels...
00:02 - Checking for high voltage locked pixels...
00:02 - Checking for high voltage locked pixels...
00:03 - Checking for high voltage locked pixels...
00:03 - Checking for high voltage locked pixels...
00:04 - Checking for high voltage locked pixels...
00:04 - Checking for high voltage locked pixels...
00:05 - Checking for high voltage locked pixels...
00:05 - Checking for high voltage locked pixels...
00:06 - Checking for high voltage locked pixels...
00:06 - Checking for high voltage locked pixels...
00:07 - Checking for high voltage locked pixels...
00:07 - Checking for high voltage locked pixels...
00:08 - Checking for high voltage locked pixels...
00:08 - Checking for high voltage locked pixels...
00:09 - Checking for high voltage locked pixels...
00:09 - Checking for high voltage locked pixels...
00:10 - Checking for high voltage locked pixels...
00:10 - Stopping TIB...
00:10 - Status: TibState.Running
00:10 - Alarms: AlarmVector.ReadError
00:10 - Connection status: True
00:10 - Disabling trigger
00:10 - Disabling PPS
00:10 - Status: TibState.PpsStopped
00:10 - Alarms: AlarmVector.ReadError
00:10 - Connection status: True
00:10 - Closing TIB connection to camera server
00:10 - Status: TibState.PpsStopped
00:10 - Alarms: AlarmVector.ReadError
00:10 - Connection status: False
00:10 - Run duration: 0:13:06
00:10 - Local camera triggers: 0
00:10 - Slow control triggers: 0
00:10 - Single photo-electron triggers: 0
00:10 - Calibration triggers: 0
00:10 - Software triggers from UCTS: 0
00:10 - Pedestal triggers: 785314
00:10 - Collected input triggers: 779127
00:10 - Busy triggers: 6
00:10 - Camera event triggers sent to clusters: 779121
00:10 - Checking for high voltage locked pixels...
00:11 - Checking for high voltage locked pixels...