10:47 - No server with URI='urn:NI-cRIO-9068-01d06bf6-MST-CEA:UnifiedAutomation:UaServerCpp' has been discovered. The client could not discover a single server.
10:47 - ECC is in state EccState.Alarm with status EccStatus.Error2
10:47 - ()
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.2, 23.8, 20.3, 19.8 deg C
10:47 - Air differential pressure: 1.3 Pa
10:47 - Water temperature (T11-T12): 14.2, 14.4 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.76] V
10:47 - Humidity: 44.9 %. Water pressure: [3.62, 5.34] bar.
10:47 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is disabled with a current of 7.890 A.
10:47 - Acknowledging error...
10:47 - ECC is in state EccState.Safe with status EccStatus.NoError
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.9 deg C
10:47 - Air differential pressure: 1.1 Pa
10:47 - Water temperature (T11-T12): 14.3, 14.5 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:47 - Humidity: 44.9 %. Water pressure: [3.58, 5.32] bar.
10:47 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is enabled with a current of 7.880 A.
10:47 - ECC is in state EccState.Safe with status EccStatus.NoError
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.9 deg C
10:47 - Air differential pressure: 1.1 Pa
10:47 - Water temperature (T11-T12): 14.3, 14.5 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:47 - Humidity: 44.9 %. Water pressure: [3.58, 5.32] bar.
10:47 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is enabled with a current of 7.880 A.
10:47 - ECC is in state EccState.Safe with status EccStatus.NoError
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.9 deg C
10:47 - Air differential pressure: 1.1 Pa
10:47 - Water temperature (T11-T12): 14.3, 14.5 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:47 - Humidity: 44.8 %. Water pressure: [3.58, 5.32] bar.
10:47 - Fan speeds: [0.0, 0.0, 360.0, 360.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is enabled with a current of 1.060 A.
10:47 - ECC is in state EccState.Safe with status EccStatus.NoError
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.8 deg C
10:47 - Air differential pressure: 1.1 Pa
10:47 - Water temperature (T11-T12): 14.4, 14.5 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:47 - Humidity: 44.6 %. Water pressure: [3.58, 5.3] bar.
10:47 - Fan speeds: [0.0, 0.0, 1200.0, 1320.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is enabled with a current of 1.040 A.
10:47 - ECC is in state EccState.Safe with status EccStatus.NoError
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.8 deg C
10:47 - Air differential pressure: 1.1 Pa
10:47 - Water temperature (T11-T12): 14.4, 14.5 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:47 - Humidity: 44.6 %. Water pressure: [3.58, 5.3] bar.
10:47 - Fan speeds: [0.0, 0.0, 1200.0, 1320.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is enabled with a current of 1.040 A.
10:47 - ECC is in state EccState.Safe with status EccStatus.NoError
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.8 deg C
10:47 - Air differential pressure: 1.2 Pa
10:47 - Water temperature (T11-T12): 14.5, 14.6 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:47 - Humidity: 44.5 %. Water pressure: [3.58, 5.3] bar.
10:47 - Fan speeds: [0.0, 0.0, 2040.0, 2040.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is enabled with a current of 1.030 A.
10:47 - ECC is in state EccState.Safe with status EccStatus.NoError
10:47 - Average temperature: 26.1 deg C
10:47 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.8 deg C
10:47 - Air differential pressure: 1.2 Pa
10:47 - Water temperature (T11-T12): 14.5, 14.6 deg C
10:47 - Back doors are open.
10:47 - Shutter is in state PartiallyOpen (error 0)
10:47 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:47 - Humidity: 44.5 %. Water pressure: [3.58, 5.3] bar.
10:47 - Fan speeds: [0.0, 0.0, 2040.0, 2040.0, 0.0, 0.0] rpm
10:47 - 24 V power supply no. 1 is enabled with a current of 1.030 A.
10:48 - Starting task "Prepare ECC"
10:48 - Preparing ECC...
10:48 - Setting ECC temperature range for Ready state to [11.000000, 35.000000]
10:48 - Setting ECC mode to EccState.Ready
10:48 - Received ECC state change notification: EccState.Safe
10:48 - Received ECC state change notification: EccState.Ready
10:48 - ECC is in state EccState.Ready with status EccStatus.NoError
10:48 - Average temperature: 26.1 deg C
10:48 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.4, 25.5, 22.3, 23.8, 20.3, 19.6 deg C
10:48 - Air differential pressure: 1.1 Pa
10:48 - Water temperature (T11-T12): 15.2, 15.0 deg C
10:48 - Back doors are open.
10:48 - Shutter is in state PartiallyOpen (error 0)
10:48 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:48 - Humidity: 43.5 %. Water pressure: [3.56, 5.28] bar.
10:48 - Fan speeds: [0.0, 0.0, 2400.0, 2280.0, 0.0, 0.0] rpm
10:48 - 24 V power supply no. 1 is enabled with a current of 1.040 A.
10:48 - Setting power supply box SPE relay to True
10:48 - Unsubscribing
10:48 - Finished task "Prepare ECC"
10:48 - ECC is in state EccState.Ready with status EccStatus.NoError
10:48 - Average temperature: 26.1 deg C
10:48 - Air temperature (T1-T6 and T9-T10): 27.4, 27.2, 24.5, 25.5, 22.3, 23.7, 20.2, 19.6 deg C
10:48 - Air differential pressure: 1.1 Pa
10:48 - Water temperature (T11-T12): 15.4, 15.2 deg C
10:48 - Back doors are open.
10:48 - Shutter is in state PartiallyOpen (error 0)
10:48 - Light sensors: [9.99, 10.0, 9.99, 6.77] V
10:48 - Humidity: 43.1 %. Water pressure: [3.56, 5.26] bar.
10:48 - Fan speeds: [0.0, 0.0, 2280.0, 2160.0, 0.0, 0.0] rpm
10:48 - 24 V power supply no. 1 is enabled with a current of 1.010 A.
10:54 - Enabling PDB shutter contactor
11:29 - ECC is in state EccState.Ready with status EccStatus.NoError
11:29 - Average temperature: 27.7 deg C
11:29 - Air temperature (T1-T6 and T9-T10): 29.0, 28.1, 28.1, 25.5, 22.4, 24.2, 18.9, 17.9 deg C
11:29 - Air differential pressure: 1.1 Pa
11:29 - Water temperature (T11-T12): 15.4, 15.0 deg C
11:29 - Back doors are open.
11:29 - Shutter is in state Closed (error 1)
11:29 - Light sensors: [6.11, 6.5, 9.99, 6.72] V
11:29 - Humidity: 43.5 %. Water pressure: [3.6, 5.34] bar.
11:29 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
11:29 - 24 V power supply no. 1 is enabled with a current of 2.880 A.
11:29 - ECC is in state EccState.Ready with status EccStatus.NoError
11:29 - Average temperature: 27.6 deg C
11:29 - Air temperature (T1-T6 and T9-T10): 29.0, 28.1, 27.9, 25.5, 22.4, 24.2, 18.9, 17.9 deg C
11:29 - Air differential pressure: 1.2 Pa
11:29 - Water temperature (T11-T12): 15.4, 15.0 deg C
11:29 - Back doors are open.
11:29 - Shutter is in state Closed (error 1)
11:29 - Light sensors: [9.99, 10.0, 9.99, 6.71] V
11:29 - Humidity: 43.4 %. Water pressure: [3.6, 5.36] bar.
11:29 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
11:29 - 24 V power supply no. 1 is enabled with a current of 2.580 A.
11:34 - ECC is in state EccState.Ready with status EccStatus.NoError
11:34 - Average temperature: 26.8 deg C
11:34 - Air temperature (T1-T6 and T9-T10): 28.5, 27.9, 25.6, 25.3, 22.3, 23.8, 18.6, 17.6 deg C
11:34 - Air differential pressure: 1.5 Pa
11:34 - Water temperature (T11-T12): 15.1, 14.8 deg C
11:34 - Back doors are open.
11:34 - Shutter is in state Closed (error 1)
11:34 - Light sensors: [5.98, 6.56, 9.99, 6.67] V
11:34 - Humidity: 44.0 %. Water pressure: [3.58, 5.34] bar.
11:34 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
11:34 - 24 V power supply no. 1 is enabled with a current of 2.810 A.
11:34 - Starting task "Powering modules..."
11:34 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --all --power_on' on Digital Trigger Crate at 10.10.4.57
11:35 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --all --power_on' on Digital Trigger Crate at 10.10.4.57
11:35 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --all --power_on' on Digital Trigger Crate at 10.10.4.57
11:35 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --all --power_on' on Digital Trigger Crate at 10.10.4.57
11:35 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --all --power_on' on Digital Trigger Crate at 10.10.4.57
11:35 - Finished task "Powering modules..."
11:55 - Starting task "Configure modules"
11:55 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20190519/config_61modules_cameraqm_moduleSwap3.NMC.xml
11:55 - Switching off high voltages in configuration
11:55 - Successfully configured 61 module(s)
11:55 - NMC is in state NmcState.Configured and knows of 61 drawer(s)
11:55 - Found 0 PPS errors.
11:55 - Finished task "Configure modules"
12:03 - Starting NMC
12:03 - Clearing PPS error counters
12:03 - Configuring UCTS
12:03 - Configuring TIB...
12:03 - Setting TIB forced mode to False
12:03 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
12:03 - Status: TibState.RunStopped
12:03 - Alarms: AlarmVector.NoAlarm
12:03 - Connection status: False
12:03 - Disabling PPS
12:03 - Status: TibState.PpsStopped
12:03 - Alarms: AlarmVector.NoAlarm
12:03 - Connection status: False
12:03 - Entering set_external_delay
12:03 - Setting ExternalDelayLocal to 0.000 ns
12:03 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
12:03 - Entering set_external_delay
12:03 - Setting ExternalDelayCalibration to 55.000 ns
12:03 - Writing 55.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
12:03 - Entering set_external_delay
12:03 - Setting ExternalDelaySphe to 150.000 ns
12:03 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
12:03 - Setting TIB trigger mode to 0x70 = TriggerMask.SlowControl|Pedestal|Software
12:03 - Writing 112 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
12:03 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
12:03 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
12:03 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
12:03 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
12:03 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
12:03 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
12:03 - Status: TibState.PpsStopped
12:03 - Alarms: AlarmVector.NoAlarm
12:03 - Connection status: False
12:03 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
12:03 - Writing 9000 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
12:03 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
12:03 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
12:03 - Writing 9000 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
12:03 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
12:03 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
12:03 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
12:03 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
12:03 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
12:03 - Connecting TIB to camera server at 10.10.4.12:222
12:03 - Starting TIB...
12:03 - Status: TibState.PpsStopped
12:03 - Alarms: AlarmVector.NoAlarm
12:03 - Connection status: False
12:03 - Resetting run
12:03 - Wait for UCTS external trigger before enabling trigger...
12:03 - Status: TibState.Standby
12:03 - Alarms: AlarmVector.NoAlarm
12:03 - Connection status: False
12:03 - Status: TibState.Standby
12:03 - Alarms: AlarmVector.NoAlarm
12:03 - Connection status: False
12:03 - Status: TibState.Armed
12:03 - Alarms: AlarmVector.NoAlarm
12:03 - Connection status: True
12:06 - Starting TIB triggers...
12:06 - Enabling trigger
12:06 - Status: TibState.Running
12:06 - Alarms: AlarmVector.NoAlarm
12:06 - Connection status: True
12:06 - Stopping TIB...
12:06 - Status: TibState.Running
12:06 - Alarms: AlarmVector.NoAlarm
12:06 - Connection status: True
12:06 - Disabling trigger
12:06 - Disabling PPS
12:06 - Status: TibState.PpsStopped
12:06 - Alarms: AlarmVector.NoAlarm
12:06 - Connection status: True
12:06 - Closing TIB connection to camera server
12:06 - Status: TibState.PpsStopped
12:06 - Alarms: AlarmVector.NoAlarm
12:06 - Connection status: False
12:06 - Run duration: 0:02:23
12:06 - Local camera triggers: 0
12:06 - Slow control triggers: 0
12:06 - Single photo-electron triggers: 0
12:06 - Calibration triggers: 0
12:06 - Software triggers from UCTS: 0
12:06 - Pedestal triggers: 1283627
12:06 - Collected input triggers: 131731
12:06 - Busy triggers: 0
12:06 - Camera event triggers sent to clusters: 131731