17:35 - Configuring UCTS
17:35 - Error configuring UCTS: Failed to call Configure: Bad statuses are present
17:37 - Configuring UCTS
17:37 - Error configuring UCTS: Failed to call Configure: Bad statuses are present
17:44 - Resetting NMC
17:44 - Starting task "Powering modules..."
17:44 - Executing command '/opt/cta/bin/cta_ctrl --all --power_off' on Digital Trigger Crate at 10.10.4.57
17:44 - Finished task "Powering modules..."
17:44 - Switching ECC back to Safe state...
17:44 - Setting ECC mode to EccState.Safe
17:44 - ECC is in state EccState.Safe with status EccStatus.NoError
17:44 - Average temperature: 22.8 deg C
17:44 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.1, 22.5, 22.2, 23.9, 19.5, 19.0 deg C
17:44 - Air differential pressure: 0.9 Pa
17:44 - Water temperature (T11-T12): 18.2, 18.1 deg C
17:44 - Back doors are closed.
17:44 - Shutter status: 1 (error 0)
17:44 - Light sensors: [9.99, 10.0, 0.01, 6.33] V
17:44 - Humidity: 45.2 %. Water pressure: [4.82, 6.6] bar.
17:44 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:44 - 24 V power supply no. 1 is enabled with a current of 0.980 A.
17:44 - Starting task "Prepare ECC"
17:44 - Preparing ECC...
17:44 - Setting ECC temperature range for Ready state to [11.000000, 40.000000]
17:44 - Setting ECC mode to EccState.Ready
17:44 - Received ECC state change notification: EccState.Safe
17:44 - Received ECC state change notification: EccState.Ready
17:44 - Setting power supply box SPE relay to True
17:44 - Unsubscribing
17:44 - Finished task "Prepare ECC"
17:45 - ECC is in state EccState.Ready with status EccStatus.NoError
17:45 - Average temperature: 22.8 deg C
17:45 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.1, 22.5, 22.2, 23.9, 19.5, 18.9 deg C
17:45 - Air differential pressure: 0.9 Pa
17:45 - Water temperature (T11-T12): 18.2, 18.0 deg C
17:45 - Back doors are closed.
17:45 - Shutter status: 1 (error 0)
17:45 - Light sensors: [9.99, 10.0, 0.01, 6.33] V
17:45 - Humidity: 45.0 %. Water pressure: [4.82, 6.6] bar.
17:45 - Fan speeds: [0.0, 0.0, 2280.0, 2160.0, 0.0, 0.0] rpm
17:45 - 24 V power supply no. 1 is enabled with a current of 0.960 A.
17:45 - ECC is in state EccState.Ready with status EccStatus.NoError
17:45 - Average temperature: 22.8 deg C
17:45 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.1, 22.5, 22.2, 23.8, 19.5, 18.9 deg C
17:45 - Air differential pressure: 0.9 Pa
17:45 - Water temperature (T11-T12): 18.2, 18.0 deg C
17:45 - Back doors are closed.
17:45 - Shutter status: 1 (error 0)
17:45 - Light sensors: [9.99, 10.0, 0.01, 6.33] V
17:45 - Humidity: 45.0 %. Water pressure: [4.82, 6.6] bar.
17:45 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:45 - 24 V power supply no. 1 is enabled with a current of 0.940 A.
17:45 - Starting task "Powering modules..."
17:45 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:45 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:45 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:45 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:45 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:45 - Finished task "Powering modules..."
17:45 - ECC is in state EccState.Ready with status EccStatus.NoError
17:45 - Average temperature: 22.8 deg C
17:45 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.2, 22.4, 22.2, 23.8, 19.5, 18.9 deg C
17:45 - Air differential pressure: 1.0 Pa
17:45 - Water temperature (T11-T12): 18.0, 17.9 deg C
17:45 - Back doors are closed.
17:45 - Shutter status: 1 (error 0)
17:45 - Light sensors: [9.99, 10.0, 0.01, 6.33] V
17:45 - Humidity: 44.4 %. Water pressure: [4.82, 6.6] bar.
17:45 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:45 - 24 V power supply no. 1 is enabled with a current of 49.700 A.
17:45 - ECC is in state EccState.Ready with status EccStatus.NoError
17:45 - Average temperature: 22.8 deg C
17:45 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.2, 22.4, 22.2, 23.8, 19.5, 18.9 deg C
17:45 - Air differential pressure: 1.0 Pa
17:45 - Water temperature (T11-T12): 18.0, 17.9 deg C
17:45 - Back doors are closed.
17:45 - Shutter status: 1 (error 0)
17:45 - Light sensors: [9.99, 10.0, 0.01, 6.33] V
17:45 - Humidity: 44.4 %. Water pressure: [4.82, 6.6] bar.
17:45 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:45 - 24 V power supply no. 1 is enabled with a current of 49.700 A.
17:45 - ECC is in state EccState.Ready with status EccStatus.NoError
17:45 - Average temperature: 22.8 deg C
17:45 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.2, 22.4, 22.2, 23.8, 19.5, 18.9 deg C
17:45 - Air differential pressure: 1.0 Pa
17:45 - Water temperature (T11-T12): 18.0, 17.9 deg C
17:45 - Back doors are closed.
17:45 - Shutter status: 1 (error 0)
17:45 - Light sensors: [9.99, 10.0, 0.01, 6.33] V
17:45 - Humidity: 44.4 %. Water pressure: [4.82, 6.6] bar.
17:45 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:45 - 24 V power supply no. 1 is enabled with a current of 49.700 A.
17:45 - ECC is in state EccState.Ready with status EccStatus.NoError
17:45 - Average temperature: 22.8 deg C
17:45 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.2, 22.4, 22.2, 23.8, 19.5, 18.9 deg C
17:45 - Air differential pressure: 1.0 Pa
17:45 - Water temperature (T11-T12): 18.0, 17.9 deg C
17:45 - Back doors are closed.
17:45 - Shutter status: 1 (error 0)
17:45 - Light sensors: [9.99, 10.0, 0.01, 6.33] V
17:45 - Humidity: 44.4 %. Water pressure: [4.82, 6.6] bar.
17:45 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:45 - 24 V power supply no. 1 is enabled with a current of 49.700 A.
17:45 - Scanning interface p4p1 for non configured modules...
17:46 - Found 0 MAC address(es)
17:46 - Scanning interface p4p1 for non configured modules...
17:46 - Found 0 MAC address(es)
17:46 - ECC is in state EccState.Ready with status EccStatus.NoError
17:46 - Average temperature: 22.8 deg C
17:46 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.2, 22.4, 22.2, 23.8, 19.5, 18.9 deg C
17:46 - Air differential pressure: 1.1 Pa
17:46 - Water temperature (T11-T12): 17.9, 17.8 deg C
17:46 - Back doors are closed.
17:46 - Shutter status: 1 (error 0)
17:46 - Light sensors: [9.99, 9.38, 0.01, 6.33] V
17:46 - Humidity: 44.3 %. Water pressure: [4.82, 6.6] bar.
17:46 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
17:46 - 24 V power supply no. 1 is enabled with a current of 51.400 A.
17:46 - ECC is in state EccState.Ready with status EccStatus.NoError
17:46 - Average temperature: 22.8 deg C
17:46 - Air temperature (T1-T6 and T9-T10): 22.8, 21.2, 20.2, 22.4, 22.2, 23.8, 19.5, 18.9 deg C
17:46 - Air differential pressure: 1.1 Pa
17:46 - Water temperature (T11-T12): 17.9, 17.8 deg C
17:46 - Back doors are closed.
17:46 - Shutter status: 1 (error 0)
17:46 - Light sensors: [9.99, 9.38, 0.01, 6.33] V
17:46 - Humidity: 44.3 %. Water pressure: [4.82, 6.6] bar.
17:46 - Fan speeds: [0.0, 0.0, 2160.0, 2160.0, 0.0, 0.0] rpm
17:46 - 24 V power supply no. 1 is enabled with a current of 51.400 A.
17:46 - Scanning interface p4p1 for non configured modules...
17:46 - Found 0 MAC address(es)
17:46 - Starting task "Powering modules..."
17:46 - Executing command '/opt/cta/bin/cta_ctrl --all --power_off' on Digital Trigger Crate at 10.10.4.57
17:46 - Finished task "Powering modules..."
17:46 - Starting task "Powering modules..."
17:46 - Executing command '/opt/cta/bin/cta_ctrl --slot 1 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:46 - Executing command '/opt/cta/bin/cta_ctrl --slot 5 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:46 - Executing command '/opt/cta/bin/cta_ctrl --slot 9 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:47 - Executing command '/opt/cta/bin/cta_ctrl --slot 15 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:47 - Executing command '/opt/cta/bin/cta_ctrl --slot 19 --all --power_on' on Digital Trigger Crate at 10.10.4.57
17:47 - Finished task "Powering modules..."
17:47 - ECC is in state EccState.Ready with status EccStatus.NoError
17:47 - Average temperature: 22.8 deg C
17:47 - Air temperature (T1-T6 and T9-T10): 22.8, 21.3, 20.3, 22.5, 22.2, 23.8, 19.5, 18.8 deg C
17:47 - Air differential pressure: 1.1 Pa
17:47 - Water temperature (T11-T12): 17.6, 17.5 deg C
17:47 - Back doors are closed.
17:47 - Shutter status: 1 (error 0)
17:47 - Light sensors: [9.66, 10.0, 0.01, 6.33] V
17:47 - Humidity: 44.3 %. Water pressure: [4.8, 6.6] bar.
17:47 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:47 - 24 V power supply no. 1 is enabled with a current of 58.200 A.
17:47 - ECC is in state EccState.Ready with status EccStatus.NoError
17:47 - Average temperature: 22.8 deg C
17:47 - Air temperature (T1-T6 and T9-T10): 22.8, 21.3, 20.3, 22.5, 22.2, 23.8, 19.5, 18.8 deg C
17:47 - Air differential pressure: 1.1 Pa
17:47 - Water temperature (T11-T12): 17.6, 17.5 deg C
17:47 - Back doors are closed.
17:47 - Shutter status: 1 (error 0)
17:47 - Light sensors: [9.66, 10.0, 0.01, 6.33] V
17:47 - Humidity: 44.3 %. Water pressure: [4.8, 6.6] bar.
17:47 - Fan speeds: [0.0, 0.0, 2280.0, 2280.0, 0.0, 0.0] rpm
17:47 - 24 V power supply no. 1 is enabled with a current of 58.200 A.
17:47 - Scanning interface p4p1 for non configured modules...
17:47 - Found 61 MAC address(es)
17:47 - Starting task "Configure modules"
17:47 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20190429/config_61modules_cameraqm_l1a+l0delays_nd_fixedneighbours.NMC.xml
17:47 - Switching off high voltages in configuration
17:47 - Successfully configured 61 module(s)
17:47 - NMC is in state NmcState.Configured and knows of 61 drawer(s)
17:47 - Found 0 PPS errors.
17:47 - Finished task "Configure modules"
17:47 - Starting NMC
17:47 - Clearing PPS error counters
17:47 - Configuring UCTS
17:47 - Configuring TIB...
17:47 - Setting TIB forced mode to False
17:47 - Writing False to Camera.TIB.Forced.ForcedMode.ForcedMode_v
17:47 - Status: TibState.RunStopped
17:47 - Alarms: AlarmVector.NoAlarm
17:47 - Connection status: False
17:47 - Disabling PPS
17:47 - Status: TibState.PpsStopped
17:47 - Alarms: AlarmVector.NoAlarm
17:47 - Connection status: False
17:47 - Entering set_external_delay
17:47 - Setting ExternalDelayLocal to 0.000 ns
17:47 - Writing 0.0 to Camera.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
17:47 - Entering set_external_delay
17:47 - Setting ExternalDelayCalibration to 55.000 ns
17:47 - Writing 55.0 to Camera.TIB.ExternalDelay.ExternalDelayCalibration.ExternalDelayCalibration_v
17:47 - Entering set_external_delay
17:47 - Setting ExternalDelaySphe to 150.000 ns
17:47 - Writing 150.0 to Camera.TIB.ExternalDelay.ExternalDelaySphe.ExternalDelaySphe_v
17:47 - Setting TIB trigger mode to 0x70 = TriggerMask.SlowControl|Pedestal|Software
17:47 - Writing 112 to Camera.TIB.TriggerMode.ModeMask.ModeMask_v
17:47 - Writing 0 to Camera.TIB.InputsEnable.InputMask.InputMask_v
17:47 - Writing False to Camera.TIB.BUSY.DisableBusy.DisableBusy_v
17:47 - Writing 0.0 to Camera.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
17:47 - Writing False to Camera.TIB.Throttler.DisableThrottler.DisableThrottler_v
17:47 - Writing 255 to Camera.TIB.Throttler.MaxTriggers50us.MaxTriggers50us_v
17:47 - Writing 255 to Camera.TIB.Throttler.MaxTriggers1ms.MaxTriggers1ms_v
17:47 - Status: TibState.PpsStopped
17:47 - Alarms: AlarmVector.NoAlarm
17:47 - Connection status: False
17:47 - Writing True to Camera.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
17:47 - Writing 1000 to Camera.TIB.Pedestal.PeriodicPedestalFrequency.PeriodicPedestalFrequency_v
17:47 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
17:47 - Writing False to Camera.TIB.Pedestal.DigitalPedestalEnable.DigitalPedestalEnable_v
17:47 - Writing 1000 to Camera.TIB.Pedestal.DigitalPedestal_config_Rate.DigitalPedestal_config_Rate_v
17:47 - Writing 375764 to Camera.TIB.Pedestal.DigitalPedestalSeed.DigitalPedestalSeed_v
17:47 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
17:47 - Writing False to Camera.TIB.Pedestal.AnalogPedestalEnable.AnalogPedestalEnable_v
17:47 - Writing 3000.0 to Camera.TIB.Pedestal.AnalogPedestalThreshold.AnalogPedestalThreshold_v
17:47 - Writing False to Camera.TIB.Pedestal.Fake_trig_enable.Fake_trig_enable_v
17:47 - Connecting TIB to camera server at 10.10.4.12:222
17:47 - Starting TIB...
17:47 - Status: TibState.PpsStopped
17:47 - Alarms: AlarmVector.NoAlarm
17:47 - Connection status: False
17:47 - Resetting run
17:47 - Wait for UCTS external trigger before enabling trigger...
17:47 - Status: TibState.Standby
17:47 - Alarms: AlarmVector.NoAlarm
17:47 - Connection status: False
17:47 - Status: TibState.Standby
17:47 - Alarms: AlarmVector.NoAlarm
17:47 - Connection status: False
17:47 - Status: TibState.Armed
17:47 - Alarms: AlarmVector.NoAlarm
17:47 - Connection status: True
17:48 - Starting TIB triggers...
17:48 - Enabling trigger
17:48 - Status: TibState.Running
17:48 - Alarms: AlarmVector.NoAlarm
17:48 - Connection status: True
17:48 - Status: TibState.Running ConnectionStatus: True
17:48 - Alarms: AlarmVector.ReadError
17:48 - Temperature: 37.44
17:48 - Local camera rate: 0.0 Hz
17:48 - Stereo trigger rate: 0.0 Hz
17:48 - SPE trigger rate: 0.0 Hz
17:48 - Calibration trigger rate: 0.0 Hz
17:48 - Software trigger rate: 0.0 Hz
17:48 - Pedestal trigger rate: 999.0 Hz
17:48 - Collected trigger rate: 999.0 Hz
17:48 - Busy rate: 0.0 Hz
17:48 - Camera trigger rate: 999.0 Hz
17:48 - Stopping TIB...
17:48 - Status: TibState.Running
17:48 - Alarms: AlarmVector.ReadError
17:48 - Connection status: True
17:48 - Disabling trigger
17:48 - Disabling PPS
17:48 - Status: TibState.PpsStopped
17:48 - Alarms: AlarmVector.ReadError
17:48 - Connection status: True
17:48 - Closing TIB connection to camera server
17:48 - Status: TibState.PpsStopped
17:48 - Alarms: AlarmVector.ReadError
17:48 - Connection status: False
17:48 - Run duration: 0:00:29
17:48 - Local camera triggers: 0
17:48 - Slow control triggers: 0
17:48 - Single photo-electron triggers: 0
17:48 - Calibration triggers: 0
17:48 - Software triggers from UCTS: 0
17:48 - Pedestal triggers: 28477
17:48 - Collected input triggers: 12378
17:48 - Busy triggers: 0
17:48 - Camera event triggers sent to clusters: 12378