16:29 - ECC is in state EccState.Ready with status EccStatus.NoError
16:29 - ECC temperature sensors: T1= 25.0, T2= 24.7, T3= 25.8, T4= 26.7 deg C
16:29 - Back doors are closed.
16:29 - Light sensors: [0, 0, 0, 0] V
16:29 - Humidity: 0.0 %. Water pressure: [0.0, 0.0].
16:29 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
16:29 - 24 V power supply no. 1 is enabled with a current of 61.700 A.
16:30 - Starting task "Check high voltages"
16:30 - Found 61 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
16:30 - Actual voltage is between 947.94 V and 1173.64 V.
16:30 - Low voltages range between 100.00 V and 100.00 V. 
16:30 - Reference voltages range between 948.03 V and 1172.93 V. 
16:30 - Maximum difference between expected and actual voltages is 1.09 V
16:30 - Maximum of current limits is 5647.07 uA
16:30 - Checking status of HVPA module in 61 drawer(s)...
16:30 - Checking status of HVPA channels in 61 drawer(s)...
16:30 - HV is stabilized in all channels.
16:30 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20190308/config_61modules_run1102.NMC.xml
16:30 - Done
16:30 - Finished task "Check high voltages"
16:30 - High voltage locked channels will be checked every 30 s
16:30 - Stopping NMC
16:31 - Found 0 PPS errors.
16:31 - Starting NMC
16:31 - Clearing PPS error counters
16:31 - Configuring UCTS
16:31 - Configuring TIB...
16:31 - Setting TIB forced mode to False
16:31 - Writing False to serveur.TIB.Forced.ForcedMode.ForcedMode_v
16:31 - Status: TibState.PpsStopped
16:31 - Alarms: AlarmVector.NoAlarm
16:31 - Connection status: False
16:31 - Entering set_external_delay
16:31 - Setting ExternalDelayLocal to 0.000 ns
16:31 - Writing 0.0 to serveur.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
16:31 - Failed to write 'serveur.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v': - overallStatus : Bad statuses are present - requestHandle : 7 - targets[] - targets[0] status: The server could not successfully process the Write service: BadNodeIdUnknown: The server could not successfully process the Write service: BadNodeIdUnknown - opcUaStatusCode : 2.15089e+09
16:31 - Writing 56.0 to serveur.TIB.ExternalDelay.ExternalDelay_v
16:31 - Setting TIB trigger mode to 0x58 = TriggerMask.SlowControl|Software|SPhE
16:31 - Writing 88 to serveur.TIB.TriggerMode.ModeMask.ModeMask_v
16:31 - Writing 0 to serveur.TIB.InputsEnable.InputMask.InputMask_v
16:31 - Writing False to serveur.TIB.BUSY.DisableBusy.DisableBusy_v
16:31 - Writing 0.0 to serveur.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
16:31 - Writing False to serveur.TIB.Throttler.DisableThrottler.DisableThrottler_v
16:31 - Failed to write 'serveur.TIB.Throttler.DisableThrottler.DisableThrottler_v': - overallStatus : Bad statuses are present - requestHandle : 19 - targets[] - targets[0] status: The server could not successfully process the Write service: BadNodeIdUnknown: The server could not successfully process the Write service: BadNodeIdUnknown - opcUaStatusCode : 2.15089e+09
16:31 - Writing False to serveur.TIB.Throttler.DisableThrottlerBP.DisableThrottlerBP_v
16:31 - Writing False to serveur.TIB.Throttler.DisableThrottlerWR.DisableThrottlerWR_v
16:31 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP50us.MaxTriggersBP50us_v
16:31 - Writing 255 to serveur.TIB.Throttler.MaxTriggersWR50us.MaxTriggersWR50us_v
16:31 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP1ms.MaxTriggersBP1ms_v
16:31 - Writing 255 to serveur.TIB.Throttler.MaxTriggersWR1ms.MaxTriggersWR1ms_v
16:31 - Status: TibState.PpsStopped
16:31 - Alarms: AlarmVector.NoAlarm
16:31 - Connection status: False
16:31 - Writing False to serveur.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
16:31 - Failed to write 'serveur.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v': - overallStatus : Bad statuses are present - requestHandle : 35 - targets[] - targets[0] status: The server could not successfully process the Write service: BadNodeIdUnknown: The server could not successfully process the Write service: BadNodeIdUnknown - opcUaStatusCode : 2.15089e+09
16:31 - Checking for high voltage locked pixels...
16:31 - Connecting TIB to camera server at 10.10.4.12:222
16:31 - Starting TIB...
16:31 - Status: TibState.PpsStopped
16:31 - Alarms: AlarmVector.NoAlarm
16:31 - Connection status: True
16:31 - Resetting run
16:31 - Wait for UCTS external trigger before enabling trigger...
16:31 - Status: TibState.Standby
16:31 - Alarms: AlarmVector.NoAlarm
16:31 - Connection status: True
16:31 - Status: TibState.Standby
16:31 - Alarms: AlarmVector.NoAlarm
16:31 - Connection status: True
16:31 - Status: TibState.CoutingPps
16:31 - Alarms: AlarmVector.NoAlarm
16:31 - Connection status: True
16:31 - Starting TIB triggers...
16:31 - Enabling trigger
16:31 - Status: TibState.Running
16:31 - Alarms: AlarmVector.NoAlarm
16:31 - Connection status: True
16:31 - Configuring calibration box...
16:31 - Configuring calibration box with leds=0x40 voltage=10.00 frequency=1000.0/1 central_current=0.0 duration=400 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=False enabled=False
16:31 - Starting flashes...
16:31 - Checking for high voltage locked pixels...
16:32 - ECC is in state EccState.Safe with status EccStatus.NoError
16:32 - Average temperature: 19.1 deg C
16:32 - Air temperature (T1-T6 and T9-T10): 19.1, 18.8, 19.2, 18.9, 19.1, 19.1, 19.5, 19.6 deg C
16:32 - Water temperature (T11-T12): 20.0, 20.0 deg C
16:32 - Back doors are open.
16:32 - Light sensors: [2.59, 2.95, 3.31, 3.58] V
16:32 - Humidity: 27.0 %. Water pressure: [1.83, 2.21].
16:32 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
16:32 - 24 V power supply no. 1 is enabled with a current of 0.400 A.
16:32 - Unsubscribing
16:32 - Checking for high voltage locked pixels...
16:32 - ECC is in state EccState.Safe with status EccStatus.NoError
16:32 - Average temperature: 19.1 deg C
16:32 - Air temperature (T1-T6 and T9-T10): 19.1, 18.8, 19.2, 18.9, 19.1, 19.1, 19.5, 19.6 deg C
16:32 - Water temperature (T11-T12): 20.0, 19.9 deg C
16:32 - Back doors are open.
16:32 - Light sensors: [2.62, 2.98, 3.34, 3.61] V
16:32 - Humidity: 27.2 %. Water pressure: [1.86, 2.24].
16:32 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
16:32 - 24 V power supply no. 1 is enabled with a current of 0.400 A.
16:32 - Unsubscribing
16:32 - ECC is in state EccState.Alarm with status EccStatus.NoError
16:32 - Alarm Front Door:TRUE;Alarm Back Door:TRUE;Control Regulation Chain;PDB error : ()
16:32 - Average temperature: 19.1 deg C
16:32 - Air temperature (T1-T6 and T9-T10): 19.1, 18.8, 19.2, 18.9, 19.1, 19.1, 19.5, 19.6 deg C
16:32 - Water temperature (T11-T12): 20.0, 19.9 deg C
16:32 - Back doors are open.
16:32 - Light sensors: [2.62, 2.98, 3.34, 3.61] V
16:32 - Humidity: 27.2 %. Water pressure: [1.86, 2.24].
16:32 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
16:32 - 24 V power supply no. 1 is enabled with a current of 0.400 A.
16:32 - Unsubscribing
16:32 - Checking for high voltage locked pixels...
16:33 - Checking for high voltage locked pixels...
16:33 - Stopping TIB...
16:33 - Status: TibState.Running
16:33 - Alarms: AlarmVector.NoAlarm
16:33 - Connection status: True
16:33 - Disabling trigger
16:33 - Disabling PPS
16:33 - Status: TibState.PpsStopped
16:33 - Alarms: AlarmVector.NoAlarm
16:33 - Connection status: True
16:33 - Closing TIB connection to camera server
16:33 - Status: TibState.PpsStopped
16:33 - Alarms: AlarmVector.NoAlarm
16:33 - Connection status: False
16:33 - Run duration: 0:02:15
16:33 - Local camera triggers: 0
16:33 - Slow control triggers: 0
16:33 - Single photo-electron triggers: 39919
16:33 - Calibration triggers: 0
16:33 - Software triggers from UCTS: 0
16:33 - Pedestal triggers: 876062
16:33 - Collected input triggers: 39919
16:33 - Busy triggers: 0
16:33 - Camera event triggers sent to clusters: 39919
16:33 - Checking for high voltage locked pixels...
16:34 - Stopping NMC
16:34 - Found 0 PPS errors.