15:38 - Starting task "Configure modules"
15:38 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20190308/config_61modules_run1101.NMC.xml
15:39 - Successfully configured 60 module(s)
15:39 - NMC is in state NmcState.Configured and knows of 60 drawer(s)
15:39 - Found 0 PPS errors.
15:39 - Finished task "Configure modules"
15:39 - Resetting NMC
15:39 - Starting task "Configure modules"
15:39 - Configuring modules with configuration /local/home/cta_test_bench/config/2019/20190308/config_61modules_run1101.NMC.xml
15:39 - Successfully configured 61 module(s)
15:39 - NMC is in state NmcState.Configured and knows of 61 drawer(s)
15:39 - Found 0 PPS errors.
15:39 - Finished task "Configure modules"
15:39 - Starting task "Switch HVPA voltage state"
15:39 - Setting HVPA current limit to 12489.75 uA
15:39 - Setting HVPA ramp speed to 35 V/s
15:39 - Switching HVPA to state Nominal
15:40 - Setting HVPA current limits...
15:40 - Finished task "Switch HVPA voltage state"
15:43 - High voltage locked channels will be checked every 30 s
15:43 - Checking for high voltage locked pixels...
15:43 - Module 101 has 1 pixel(s) locked (HVPA status of 0x7e)!
15:43 - Module 131 has 1 pixel(s) locked (HVPA status of 0x77)!
15:43 - Unlocking 2 channel(s)...
15:43 - Resetting HVPA channel 0 of drawer 101...
15:43 - Resetting HVPA channel 3 of drawer 131...
15:44 - Checking for high voltage locked pixels...
15:44 - Checking for high voltage locked pixels...
15:44 - Starting task "Check high voltages"
15:44 - Found 61 drawer(s) in Nominal state, 0 in Low state and 0 in Wait state
15:45 - Actual voltage is between 947.94 V and 1173.03 V.
15:45 - Low voltages range between 100.00 V and 100.00 V. 
15:45 - Checking for high voltage locked pixels...
15:45 - Reference voltages range between 948.03 V and 1172.93 V. 
15:45 - Maximum difference between expected and actual voltages is 0.71 V
15:45 - Maximum of current limits is 5647.07 uA
15:45 - Checking status of HVPA module in 61 drawer(s)...
15:45 - Checking status of HVPA channels in 61 drawer(s)...
15:45 - HV is stabilized in all channels.
15:45 - Checking reference and low voltages against /local/home/cta_test_bench/config/2019/20190308/config_61modules_run1101.NMC.xml
15:45 - Done
15:45 - Finished task "Check high voltages"
15:45 - ECC is in state EccState.Ready with status EccStatus.NoError
15:45 - ECC temperature sensors: T1= 24.9, T2= 24.5, T3= 25.6, T4= 26.5 deg C
15:45 - Back doors are closed.
15:45 - Light sensors: [0, 0, 0, 0] V
15:45 - Humidity: 0.0 %. Water pressure: [0.0, 0.0].
15:45 - Fan speeds: [0.0, 0.0, 0.0, 0.0, 0.0, 0.0] rpm
15:45 - 24 V power supply no. 1 is enabled with a current of 61.700 A.
15:45 - Checking for high voltage locked pixels...
15:45 - Stopping NMC
15:45 - Found 0 PPS errors.
15:45 - Starting NMC
15:45 - Clearing PPS error counters
15:46 - Checking for high voltage locked pixels...
15:46 - Configuring UCTS
15:46 - Configuring TIB...
15:46 - Setting TIB forced mode to False
15:46 - Writing False to serveur.TIB.Forced.ForcedMode.ForcedMode_v
15:46 - Status: TibState.PpsStopped
15:46 - Alarms: AlarmVector.NoAlarm
15:46 - Connection status: False
15:46 - Entering set_external_delay
15:46 - Setting ExternalDelayLocal to 0.000 ns
15:46 - Writing 0.0 to serveur.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v
15:46 - Failed to write 'serveur.TIB.ExternalDelay.ExternalDelayLocal.ExternalDelayLocal_v': - overallStatus : Bad statuses are present - requestHandle : 7 - targets[] - targets[0] status: The server could not successfully process the Write service: BadNodeIdUnknown: The server could not successfully process the Write service: BadNodeIdUnknown - opcUaStatusCode : 2.15089e+09
15:46 - Writing 56.0 to serveur.TIB.ExternalDelay.ExternalDelay_v
15:46 - Setting TIB trigger mode to 0x58 = TriggerMask.SlowControl|Software|SPhE
15:46 - Writing 88 to serveur.TIB.TriggerMode.ModeMask.ModeMask_v
15:46 - Writing 0 to serveur.TIB.InputsEnable.InputMask.InputMask_v
15:46 - Writing False to serveur.TIB.BUSY.DisableBusy.DisableBusy_v
15:46 - Writing 0.0 to serveur.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
15:46 - Writing False to serveur.TIB.Throttler.DisableThrottler.DisableThrottler_v
15:46 - Failed to write 'serveur.TIB.Throttler.DisableThrottler.DisableThrottler_v': - overallStatus : Bad statuses are present - requestHandle : 19 - targets[] - targets[0] status: The server could not successfully process the Write service: BadNodeIdUnknown: The server could not successfully process the Write service: BadNodeIdUnknown - opcUaStatusCode : 2.15089e+09
15:46 - Writing False to serveur.TIB.Throttler.DisableThrottlerBP.DisableThrottlerBP_v
15:46 - Writing False to serveur.TIB.Throttler.DisableThrottlerWR.DisableThrottlerWR_v
15:46 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP50us.MaxTriggersBP50us_v
15:46 - Writing 255 to serveur.TIB.Throttler.MaxTriggersWR50us.MaxTriggersWR50us_v
15:46 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP1ms.MaxTriggersBP1ms_v
15:46 - Writing 255 to serveur.TIB.Throttler.MaxTriggersWR1ms.MaxTriggersWR1ms_v
15:46 - Status: TibState.PpsStopped
15:46 - Alarms: AlarmVector.NoAlarm
15:46 - Connection status: False
15:46 - Writing False to serveur.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v
15:46 - Failed to write 'serveur.TIB.Pedestal.PeriodicPedestalEnable.PeriodicPedestalEnable_v': - overallStatus : Bad statuses are present - requestHandle : 35 - targets[] - targets[0] status: The server could not successfully process the Write service: BadNodeIdUnknown: The server could not successfully process the Write service: BadNodeIdUnknown - opcUaStatusCode : 2.15089e+09
15:46 - Connecting TIB to camera server at 10.10.4.12:222
15:46 - Starting TIB...
15:46 - Status: TibState.PpsStopped
15:46 - Alarms: AlarmVector.NoAlarm
15:46 - Connection status: True
15:46 - Resetting run
15:46 - Wait for UCTS external trigger before enabling trigger...
15:46 - Status: TibState.Standby
15:46 - Alarms: AlarmVector.NoAlarm
15:46 - Connection status: True
15:46 - Status: TibState.Standby
15:46 - Alarms: AlarmVector.NoAlarm
15:46 - Connection status: True
15:46 - Status: TibState.CoutingPps
15:46 - Alarms: AlarmVector.NoAlarm
15:46 - Connection status: True
15:46 - Starting TIB triggers...
15:46 - Enabling trigger
15:46 - Status: TibState.Running
15:46 - Alarms: AlarmVector.NoAlarm
15:46 - Connection status: True
15:46 - Configuring calibration box...
15:46 - Configuring calibration box with leds=0x40 voltage=10.00 frequency=1000.0/1 central_current=0.0 duration=400 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=False enabled=False
15:46 - Starting flashes...
15:46 - Checking for high voltage locked pixels...
15:47 - Checking for high voltage locked pixels...
15:47 - Stopping TIB...
15:47 - Status: TibState.Running
15:47 - Alarms: AlarmVector.NoAlarm
15:47 - Connection status: True
15:47 - Disabling trigger
15:47 - Disabling PPS
15:47 - Status: TibState.PpsStopped
15:47 - Alarms: AlarmVector.NoAlarm
15:47 - Connection status: True
15:47 - Closing TIB connection to camera server
15:47 - Checking for high voltage locked pixels...
15:47 - Status: TibState.PpsStopped
15:47 - Alarms: AlarmVector.NoAlarm
15:47 - Connection status: False
15:47 - Run duration: 0:01:12
15:47 - Local camera triggers: 0
15:47 - Slow control triggers: 0
15:47 - Single photo-electron triggers: 39996
15:47 - Calibration triggers: 0
15:47 - Software triggers from UCTS: 0
15:47 - Pedestal triggers: 464283
15:47 - Collected input triggers: 39996
15:47 - Busy triggers: 0
15:47 - Camera event triggers sent to clusters: 39996