11:15 - Checking high voltages...
11:15 - Starting task "Check HV"
11:15 - Checking reference voltages against 0.000000 V
11:15 - Done
11:15 - NMC does not know any drawer! But high voltages could still be enabled!
11:15 - Finished task "Check HV"
11:15 - Starting task "Configure NMC"
11:15 - Configuring modules with configuration /local/home/cta_test_bench/tests/2018/20180529/config_4modules_3NN.NMC.xml
11:15 - NMC is in state NmcState.Configured and knows of 4 drawer(s)
11:15 - Found 0 PPS errors.
11:15 - Finished task "Configure NMC"
11:15 - Checking high voltages...
11:15 - Starting task "Check HV"
11:15 - Checking reference voltages against 0.000000 V
11:15 - Reference voltage of channel 0 in drawer #114: expected 0.00, read 1092.65
11:15 - Reference voltage of channel 1 in drawer #114: expected 0.00, read 1117.69
11:15 - Reference voltage of channel 2 in drawer #114: expected 0.00, read 1061.26
11:15 - Reference voltage of channel 3 in drawer #114: expected 0.00, read 1158.14
11:15 - Reference voltage of channel 5 in drawer #114: expected 0.00, read 1171.44
11:15 - Reference voltage of channel 6 in drawer #114: expected 0.00, read 1102.07
11:15 - Reference voltage of channel 0 in drawer #115: expected 0.00, read 1154.16
11:15 - Reference voltage of channel 1 in drawer #115: expected 0.00, read 1164.29
11:15 - Reference voltage of channel 2 in drawer #115: expected 0.00, read 1158.46
11:15 - Reference voltage of channel 3 in drawer #115: expected 0.00, read 1119.57
11:15 - Reference voltage of channel 4 in drawer #115: expected 0.00, read 1166.64
11:15 - Reference voltage of channel 5 in drawer #115: expected 0.00, read 1179.65
11:15 - Reference voltage of channel 6 in drawer #115: expected 0.00, read 1097.92
11:15 - Reference voltage of channel 0 in drawer #116: expected 0.00, read 1078.12
11:15 - Reference voltage of channel 1 in drawer #116: expected 0.00, read 1104.93
11:15 - Reference voltage of channel 2 in drawer #116: expected 0.00, read 1075.89
11:15 - Reference voltage of channel 3 in drawer #116: expected 0.00, read 1145.38
11:15 - Reference voltage of channel 4 in drawer #116: expected 0.00, read 1184.94
11:15 - Reference voltage of channel 6 in drawer #116: expected 0.00, read 1227.22
11:15 - Reference voltage of channel 6 in drawer #149: expected 0.00, read 969.17
11:15 - Done
11:15 - Found 4 drawer(s). Reference voltage is between 0.00 V and 1227.22 V. Actual voltage is between 0.00 V and 201.30 V.
11:15 - Maximum difference between reference and actual voltage is 1019.82 V
11:15 - Checking status of HVPA module in 4 drawer(s)...
11:15 - HVPA module in drawer 116 has a status of 0x5f!
11:15 - HVPA module in drawer 149 has a status of 0x7b!
11:15 - Checking status of HVPA channels in 4 drawer(s)...
11:15 - HVPA channel 2 of drawer 149 has status 0x8001!
11:15 - Resetting HVPA channel 2 of drawer 149...
11:15 - HVPA channel 5 of drawer 116 has status 0x8001!
11:15 - Resetting HVPA channel 5 of drawer 116...
11:15 - HV was locked in 2 channel(s), was in rise default in 0 channel(s) and was still in progress in 20 channel(s)
11:15 - Finished task "Check HV"
11:15 - Checking high voltages...
11:15 - Starting task "Check HV"
11:15 - Checking reference voltages against /local/home/cta_test_bench/tests/2018/20180529/config_4modules_3NN.NMC.xml
11:15 - Reference voltage of channel 5 in drawer #116: expected 1190.92, read 0.00
11:15 - Reference voltage of channel 0 in drawer #149: expected 951.32, read 0.00
11:15 - Reference voltage of channel 1 in drawer #149: expected 993.09, read 0.00
11:15 - Reference voltage of channel 2 in drawer #149: expected 988.47, read 0.00
11:15 - Reference voltage of channel 3 in drawer #149: expected 982.15, read 0.00
11:15 - Reference voltage of channel 4 in drawer #149: expected 988.76, read 0.00
11:15 - Reference voltage of channel 5 in drawer #149: expected 971.32, read 0.00
11:15 - Done
11:15 - Found 4 drawer(s). Reference voltage is between 0.00 V and 1227.22 V. Actual voltage is between 0.00 V and 443.47 V.
11:15 - Maximum difference between reference and actual voltage is 783.75 V
11:15 - Checking status of HVPA module in 4 drawer(s)...
11:15 - Checking status of HVPA channels in 4 drawer(s)...
11:15 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 20 channel(s)
11:15 - Finished task "Check HV"
11:16 - Enabling high voltages...
11:16 - Starting task "Enable HV"
11:16 - Setting HV to 100.0 V
11:16 - Check of HVPA failed: expected 100.00, read 1104.93
11:16 - Check of HVPA failed: expected 100.00, read 1145.38
11:16 - Checking status of HVPA channels in 4 drawer(s)...
11:16 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 28 channel(s)
11:16 - Setting HV to nominal values...
11:16 - Setting channel 0 voltages to [1092.65, 1154.16, 1078.12, 951.32]
11:16 - Setting channel 1 voltages to [1117.69, 1164.29, 1104.93, 993.09]
11:16 - Setting channel 2 voltages to [1061.26, 1158.46, 1075.89, 988.47]
11:16 - Setting channel 3 voltages to [1158.14, 1119.57, 1145.38, 982.15]
11:16 - Setting channel 4 voltages to [0.0, 1166.64, 1184.94, 988.76]
11:16 - Setting channel 5 voltages to [1171.44, 1179.65, 1190.92, 971.32]
11:16 - Setting channel 6 voltages to [1102.07, 1097.92, 1227.22, 969.17]
11:16 - Checking status of HVPA channels in 4 drawer(s)...
11:16 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 11 channel(s)
11:16 - Check of 'NectarFrontEnd_115.Hvpa.Hvpa2.Voltage' failed: expected 1158.46, read 100
11:16 - Finished task "Enable HV"
11:16 - Checking high voltages...
11:16 - Starting task "Check HV"
11:16 - Checking reference voltages against /local/home/cta_test_bench/tests/2018/20180529/config_4modules_3NN.NMC.xml
11:16 - Done
11:16 - Found 4 drawer(s). Reference voltage is between 0.00 V and 1227.22 V. Actual voltage is between 54.90 V and 1227.93 V.
11:16 - Maximum difference between reference and actual voltage is 799.30 V
11:16 - Checking status of HVPA module in 4 drawer(s)...
11:16 - Checking status of HVPA channels in 4 drawer(s)...
11:16 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 8 channel(s)
11:16 - Finished task "Check HV"
11:17 - Checking high voltages...
11:17 - Starting task "Check HV"
11:17 - Checking reference voltages against /local/home/cta_test_bench/tests/2018/20180529/config_4modules_3NN.NMC.xml
11:17 - Done
11:17 - Found 4 drawer(s). Reference voltage is between 0.00 V and 1227.22 V. Actual voltage is between 25.62 V and 1228.54 V.
11:17 - Maximum difference between reference and actual voltage is 111.83 V
11:17 - Checking status of HVPA module in 4 drawer(s)...
11:17 - Checking status of HVPA channels in 4 drawer(s)...
11:17 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 1 channel(s)
11:17 - Finished task "Check HV"
11:17 - Checking high voltages...
11:17 - Starting task "Check HV"
11:17 - Checking reference voltages against /local/home/cta_test_bench/tests/2018/20180529/config_4modules_3NN.NMC.xml
11:17 - Done
11:17 - Found 4 drawer(s). Reference voltage is between 0.00 V and 1227.22 V. Actual voltage is between 5.49 V and 1229.15 V.
11:17 - Maximum difference between reference and actual voltage is 5.49 V
11:17 - Checking status of HVPA module in 4 drawer(s)...
11:17 - Checking status of HVPA channels in 4 drawer(s)...
11:17 - HV is stabilized in all channels.
11:17 - Finished task "Check HV"
11:21 - Rebooting TIB...
11:22 - Checking high voltages...
11:22 - Starting task "Check HV"
11:22 - Checking reference voltages against /local/home/cta_test_bench/tests/2018/20180529/config_4modules_3NN.NMC.xml
11:22 - Done
11:22 - Found 4 drawer(s). Reference voltage is between 0.00 V and 1227.22 V. Actual voltage is between 1.22 V and 1229.15 V.
11:22 - Maximum difference between reference and actual voltage is 1.93 V
11:22 - Checking status of HVPA module in 4 drawer(s)...
11:22 - Checking status of HVPA channels in 4 drawer(s)...
11:22 - HV is stabilized in all channels.
11:22 - Finished task "Check HV"
11:22 - Starting NMC
11:22 - Clearing PPS error counters
11:22 - Status: TibState.RunStopped
11:22 - Alarms: AlarmVector.NoAlarm
11:22 - External delay: 3825.000000 ns
11:22 - Trigger mask: 0x51 = TriggerMask.SlowControl|Software|Mono
11:22 - Input mask: 0x7
11:22 - Disable BUSY: False
11:22 - Extra BUSY Delay: 0.0
11:22 - Temperature: 36.62
11:23 - Configuring TIB...
11:23 - Setting TIB forced mode to False
11:23 - Writing False to serveur.TIB.Forced.ForcedMode.ForcedMode_v
11:23 - Status: TibState.RunStopped
11:23 - Alarms: AlarmVector.NoAlarm
11:23 - Disabling PPS
11:23 - Status: TibState.PpsStopped
11:23 - Alarms: AlarmVector.NoAlarm
11:23 - Writing 0.0 to serveur.TIB.ExternalDelay.ExternalDelay_v
11:23 - Setting TIB trigger mode to 0x1 = TriggerMask.Mono
11:23 - Writing 1 to serveur.TIB.TriggerMode.ModeMask.ModeMask_v
11:23 - Writing 0 to serveur.TIB.InputsEnable.InputMask.InputMask_v
11:23 - Writing False to serveur.TIB.BUSY.DisableBusy.DisableBusy_v
11:23 - Writing 0.0 to serveur.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
11:23 - Writing False to serveur.TIB.Throttler.DisableThrottlerBP.DisableThrottlerBP_v
11:23 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP50us.MaxTriggersBP50us_v
11:23 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP1ms.MaxTriggersBP1ms_v
11:23 - Writing False to serveur.TIB.Throttler.DisableThrottlerWR.DisableThrottlerWR_v
11:23 - Writing 255 to serveur.TIB.Throttler.MaxTriggersWR50us.MaxTriggersWR50us_v
11:23 - Writing 255 to serveur.TIB.Throttler.MaxTriggersWR1ms.MaxTriggersWR1ms_v
11:23 - Status: TibState.PpsStopped
11:23 - Alarms: AlarmVector.NoAlarm
11:23 - Closing TIB connection to camera server
11:23 - Connecting TIB to camera server at 10.10.0.251:222
11:23 - Starting TIB...
11:23 - Status: TibState.PpsStopped
11:23 - Alarms: AlarmVector.NoAlarm
11:23 - Resetting run
11:23 - Wait for UCTS external trigger before enabling trigger...
11:23 - Status: TibState.Standby
11:23 - Alarms: AlarmVector.NoAlarm
11:23 - Status: TibState.Standby
11:23 - Alarms: AlarmVector.NoAlarm
11:23 - Status: TibState.CoutingPps
11:23 - Alarms: AlarmVector.NoAlarm
11:24 - Starting TIB triggers...
11:24 - Enabling trigger
11:24 - Status: TibState.Running
11:24 - Alarms: AlarmVector.NoAlarm
12:58 - Stopping TIB...
12:58 - Status: TibState.Running
12:58 - Alarms: AlarmVector.NoAlarm
12:58 - Disabling trigger
12:58 - Disabling PPS
12:58 - Status: TibState.PpsStopped
12:58 - Alarms: AlarmVector.NoAlarm
12:58 - Closing TIB connection to camera server
12:58 - Status: TibState.PpsStopped
12:58 - Alarms: AlarmVector.NoAlarm
12:58 - Run duration: 1:34:18
12:58 - Local camera triggers: 0
12:58 - Slow control triggers: 0
12:58 - Single photo-electron triggers: 565664
12:58 - Calibration triggers: 0
12:58 - Software triggers from UCTS: 0
12:58 - Auto-pedestal triggers: 36828260
12:58 - Collected input triggers: 119813
12:58 - Busy triggers: 49
12:58 - Non-busy triggers sent to UCTS: 119764
12:58 - Camera event triggers sent to clusters: 119764
12:59 - Stopping NMC
12:59 - Found 0 PPS errors.
12:59 - Checking high voltages...
12:59 - Starting task "Check HV"
12:59 - Checking reference voltages against /local/home/cta_test_bench/tests/2018/20180529/config_4modules_3NN.NMC.xml
12:59 - Done
12:59 - Found 4 drawer(s). Reference voltage is between 0.00 V and 1227.22 V. Actual voltage is between 1.22 V and 1230.37 V.
12:59 - Maximum difference between reference and actual voltage is 3.15 V
12:59 - Checking status of HVPA module in 4 drawer(s)...
12:59 - Checking status of HVPA channels in 4 drawer(s)...
12:59 - HV is stabilized in all channels.
12:59 - Finished task "Check HV"