13:24 - ECC is in state EccState.Ready with status EccStatus.NoError
13:24 - ECC temperature sensors: T1= 34.2, T2= 24.5, T3= 23.9, T4= 24.1 deg C
13:24 - 24 V power supply no. 1 is enabled with a current of 9.760 A.
13:24 - Configuring calibration box...
13:24 - Configuring calibration box with leds=0x0 voltage=9.25 frequency=300.0/300 central_current=0.0 duration=0 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=True enabled=True
13:24 - Stopping NMC
13:24 - Found 0 PPS errors.
13:24 - Checking high voltages...
13:24 - Starting task "Check HV"
13:24 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:24 - Done
13:24 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1262.89 V. Actual voltage is between 968.68 V and 1263.92 V.
13:24 - Maximum difference between reference and actual voltage is 1.74 V
13:24 - Checking status of HVPA module in 12 drawer(s)...
13:24 - Checking status of HVPA channels in 12 drawer(s)...
13:24 - HV is stabilized in all channels.
13:24 - Finished task "Check HV"
13:24 - Starting NMC
13:24 - Clearing PPS error counters
13:24 - Configuring TIB...
13:24 - Setting TIB forced mode to False
13:24 - Writing False to serveur.TIB.Forced.ForcedMode.ForcedMode_v
13:24 - Status: TibState.PpsStopped
13:24 - Alarms: AlarmVector.NoAlarm
13:24 - Writing 0.0 to serveur.TIB.ExternalDelay.ExternalDelay_v
13:24 - Setting TIB trigger mode to 0x8 = TriggerMask.SPhE
13:24 - Writing 8 to serveur.TIB.TriggerMode.ModeMask.ModeMask_v
13:24 - Writing 0 to serveur.TIB.InputsEnable.InputMask.InputMask_v
13:24 - Writing False to serveur.TIB.BUSY.DisableBusy.DisableBusy_v
13:24 - Writing 0.0 to serveur.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
13:24 - Writing False to serveur.TIB.Throttler.DisableThrottlerBP.DisableThrottlerBP_v
13:24 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP50us.MaxTriggersBP50us_v
13:24 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP1ms.MaxTriggersBP1ms_v
13:24 - Status: TibState.PpsStopped
13:24 - Alarms: AlarmVector.NoAlarm
13:24 - Closing TIB connection to camera server
13:24 - Connecting TIB to camera server at 10.10.0.251:222
13:24 - Starting TIB...
13:24 - Status: TibState.PpsStopped
13:24 - Alarms: AlarmVector.NoAlarm
13:24 - Resetting run
13:24 - Wait for UCTS external trigger before enabling trigger...
13:24 - Status: TibState.Standby
13:24 - Alarms: AlarmVector.NoAlarm
13:24 - Status: TibState.Standby
13:24 - Alarms: AlarmVector.NoAlarm
13:24 - Status: TibState.CoutingPps
13:24 - Alarms: AlarmVector.NoAlarm
13:24 - Starting TIB triggers...
13:24 - Enabling trigger
13:24 - Status: TibState.Running
13:24 - Alarms: AlarmVector.NoAlarm
13:25 - Status: TibState.Running ConnectionStatus: True
13:25 - Alarms: AlarmVector.NoAlarm
13:25 - Temperature: 36.6875
13:25 - Local camera rate: 0.0 Hz
13:25 - Stereo trigger rate: 0.0 Hz
13:25 - SPE trigger rate: 10204.0 Hz
13:25 - Calibration trigger rate: 0.0 Hz
13:25 - Software trigger rate: 0.0 Hz
13:25 - Auto-pedestal trigger rate: 6451.0 Hz
13:25 - Collected trigger rate: 10143.0 Hz
13:25 - Busy rate: 720.0 Hz
13:25 - Camera trigger rate: 9423.0 Hz
13:25 - Stopping TIB...
13:25 - Status: TibState.Running
13:25 - Alarms: AlarmVector.NoAlarm
13:25 - Disabling trigger
13:25 - Disabling PPS
13:25 - Status: TibState.PpsStopped
13:25 - Alarms: AlarmVector.NoAlarm
13:25 - Closing TIB connection to camera server
13:25 - Status: TibState.PpsStopped
13:25 - Alarms: AlarmVector.NoAlarm
13:25 - Run duration: 0:00:16
13:25 - Local camera triggers: 0
13:25 - Slow control triggers: 0
13:25 - Single photo-electron triggers: 151805
13:25 - Calibration triggers: 0
13:25 - Software triggers from UCTS: 0
13:25 - Auto-pedestal triggers: 98146
13:25 - Collected input triggers: 119233
13:25 - Busy triggers: 8412
13:25 - Non-busy triggers sent to UCTS: 110833
13:25 - Camera event triggers sent to clusters: 110833
13:25 - Stopping NMC
13:25 - Found 0 PPS errors.
13:25 - Checking high voltages...
13:25 - Starting task "Check HV"
13:25 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:25 - Done
13:25 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1262.89 V. Actual voltage is between 968.68 V and 1264.53 V.
13:25 - Maximum difference between reference and actual voltage is 1.74 V
13:25 - Checking status of HVPA module in 12 drawer(s)...
13:25 - Checking status of HVPA channels in 12 drawer(s)...
13:25 - HV is stabilized in all channels.
13:25 - Finished task "Check HV"
13:28 - Disabling high voltages...
13:28 - Starting task "Disable HV"
13:28 - Check of HVPA failed: expected 0.00, read 1084.38
13:28 - Check of HVPA failed: expected 0.00, read 1112.00
13:28 - Check of HVPA failed: expected 0.00, read 1136.63
13:28 - Check of HVPA failed: expected 0.00, read 1135.79
13:28 - Check of HVPA failed: expected 0.00, read 1135.79
13:28 - Maximum reference voltage is now 0.00 V
13:28 - Finished task "Disable HV"
13:29 - Checking high voltages...
13:29 - Starting task "Check HV"
13:29 - Checking reference voltages against 0.000000 V
13:29 - Done
13:29 - Found 12 drawer(s). Reference voltage is between 0.00 V and 0.00 V. Actual voltage is between 267.79 V and 382.47 V.
13:29 - Maximum difference between reference and actual voltage is 372.71 V
13:29 - Checking status of HVPA module in 12 drawer(s)...
13:29 - Checking status of HVPA channels in 12 drawer(s)...
13:29 - HV is stabilized in all channels.
13:29 - Finished task "Check HV"
13:31 - Resetting NMC
13:31 - Starting task "Configure NMC"
13:31 - Configuring modules with configuration /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:31 - NMC is in state NmcState.Configured and knows of 12 drawer(s)
13:31 - Found 0 PPS errors.
13:31 - Finished task "Configure NMC"
13:31 - Checking high voltages...
13:31 - Starting task "Check HV"
13:31 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:31 - Reference voltage of channel 0 in drawer #4: expected 1181.26, read 0.00
13:31 - Reference voltage of channel 1 in drawer #4: expected 1184.50, read 0.00
13:31 - Reference voltage of channel 3 in drawer #4: expected 1153.03, read 0.00
13:31 - Reference voltage of channel 4 in drawer #4: expected 1200.52, read 0.00
13:31 - Reference voltage of channel 5 in drawer #4: expected 1225.58, read 0.00
13:31 - Done
13:31 - Found 12 drawer(s). Reference voltage is between 0.00 V and 1262.89 V. Actual voltage is between 1.22 V and 574.01 V.
13:31 - Maximum difference between reference and actual voltage is 705.19 V
13:31 - Checking status of HVPA module in 12 drawer(s)...
13:31 - Checking status of HVPA channels in 12 drawer(s)...
13:31 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 79 channel(s)
13:31 - Finished task "Check HV"
13:31 - Resetting NMC
13:31 - Starting task "Configure NMC"
13:31 - Configuring modules with configuration /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:31 - NMC is in state NmcState.Configured and knows of 12 drawer(s)
13:31 - Found 0 PPS errors.
13:31 - Finished task "Configure NMC"
13:31 - Checking high voltages...
13:31 - Starting task "Check HV"
13:31 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:31 - Done
13:31 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1262.89 V. Actual voltage is between 121.39 V and 906.46 V.
13:31 - Maximum difference between reference and actual voltage is 1059.66 V
13:31 - Checking status of HVPA module in 12 drawer(s)...
13:31 - Checking status of HVPA channels in 12 drawer(s)...
13:31 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 84 channel(s)
13:31 - Finished task "Check HV"
13:37 - Checking high voltages...
13:37 - Starting task "Check HV"
13:37 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:37 - Done
13:37 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1262.89 V. Actual voltage is between 969.29 V and 1264.53 V.
13:37 - Maximum difference between reference and actual voltage is 1.74 V
13:37 - Checking status of HVPA module in 12 drawer(s)...
13:37 - Checking status of HVPA channels in 12 drawer(s)...
13:37 - HV is stabilized in all channels.
13:37 - Finished task "Check HV"
13:37 - ECC is in state EccState.Ready with status EccStatus.NoError
13:37 - ECC temperature sensors: T1= 34.3, T2= 24.5, T3= 23.9, T4= 24.1 deg C
13:37 - 24 V power supply no. 1 is enabled with a current of 9.760 A.
13:37 - Starting NMC
13:37 - Clearing PPS error counters
13:37 - Configuring calibration box...
13:37 - Configuring calibration box with leds=0x0 voltage=9.25 frequency=300.0/300 central_current=0.0 duration=0 width=1 lemo_out=True fiber1_out=True fiber2_out=True lemo_in=True enabled=True
13:38 - Configuring TIB...
13:38 - Setting TIB forced mode to False
13:38 - Writing False to serveur.TIB.Forced.ForcedMode.ForcedMode_v
13:38 - Status: TibState.PpsStopped
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Writing 0.0 to serveur.TIB.ExternalDelay.ExternalDelay_v
13:38 - Setting TIB trigger mode to 0x8 = TriggerMask.SPhE
13:38 - Writing 8 to serveur.TIB.TriggerMode.ModeMask.ModeMask_v
13:38 - Writing 0 to serveur.TIB.InputsEnable.InputMask.InputMask_v
13:38 - Writing False to serveur.TIB.BUSY.DisableBusy.DisableBusy_v
13:38 - Writing 0.0 to serveur.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
13:38 - Writing False to serveur.TIB.Throttler.DisableThrottlerBP.DisableThrottlerBP_v
13:38 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP50us.MaxTriggersBP50us_v
13:38 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP1ms.MaxTriggersBP1ms_v
13:38 - Status: TibState.PpsStopped
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Closing TIB connection to camera server
13:38 - Connecting TIB to camera server at 10.10.0.251:222
13:38 - Starting TIB...
13:38 - Status: TibState.PpsStopped
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Resetting run
13:38 - Wait for UCTS external trigger before enabling trigger...
13:38 - Status: TibState.Standby
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Status: TibState.Standby
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Status: TibState.CoutingPps
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Starting TIB triggers...
13:38 - Enabling trigger
13:38 - Status: TibState.Running
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Status: TibState.Running ConnectionStatus: True
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Temperature: 36.6875
13:38 - Local camera rate: 0.0 Hz
13:38 - Stereo trigger rate: 0.0 Hz
13:38 - SPE trigger rate: 9830.0 Hz
13:38 - Calibration trigger rate: 0.0 Hz
13:38 - Software trigger rate: 0.0 Hz
13:38 - Auto-pedestal trigger rate: 6653.0 Hz
13:38 - Collected trigger rate: 9781.0 Hz
13:38 - Busy rate: 680.0 Hz
13:38 - Camera trigger rate: 9102.0 Hz
13:38 - Stopping TIB...
13:38 - Status: TibState.Running
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Disabling trigger
13:38 - Disabling PPS
13:38 - Status: TibState.PpsStopped
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Closing TIB connection to camera server
13:38 - Status: TibState.PpsStopped
13:38 - Alarms: AlarmVector.NoAlarm
13:38 - Run duration: 0:00:14
13:38 - Local camera triggers: 0
13:38 - Slow control triggers: 0
13:38 - Single photo-electron triggers: 138071
13:38 - Calibration triggers: 0
13:38 - Software triggers from UCTS: 0
13:38 - Auto-pedestal triggers: 90775
13:38 - Collected input triggers: 120231
13:38 - Busy triggers: 8473
13:38 - Non-busy triggers sent to UCTS: 111774
13:38 - Camera event triggers sent to clusters: 111774
13:38 - Stopping NMC
13:38 - Found 0 PPS errors.
13:38 - Checking high voltages...
13:38 - Starting task "Check HV"
13:38 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180326/config_12modules_SPE_2GHz_nf60.NMC.xml
13:38 - Done
13:38 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1262.89 V. Actual voltage is between 968.68 V and 1263.92 V.
13:38 - Maximum difference between reference and actual voltage is 1.20 V
13:38 - Checking status of HVPA module in 12 drawer(s)...
13:38 - Checking status of HVPA channels in 12 drawer(s)...
13:38 - HV is stabilized in all channels.
13:38 - Finished task "Check HV"