14:15 - Starting task "Configure NMC"
14:15 - Configuring modules with configuration /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:15 - NMC is in state NmcState.Configured and knows of 12 drawer(s)
14:15 - Found 0 PPS errors.
14:15 - Finished task "Configure NMC"
14:15 - Checking high voltages...
14:15 - Starting task "Check HV"
14:15 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:15 - Reference voltage of channel 4 in drawer #15: expected 991.63, read 1001.75
14:15 - Done
14:15 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1275.68 V. Actual voltage is between 968.68 V and 1277.34 V.
14:15 - Maximum difference between reference and actual voltage is 1.82 V
14:15 - Checking status of HVPA module in 12 drawer(s)...
14:15 - Checking status of HVPA channels in 12 drawer(s)...
14:15 - HV is stabilized in all channels.
14:15 - Finished task "Check HV"
14:15 - Resetting NMC
14:15 - Starting task "Configure NMC"
14:15 - Configuring modules with configuration /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:16 - NMC is in state NmcState.Configured and knows of 12 drawer(s)
14:16 - Found 0 PPS errors.
14:16 - Finished task "Configure NMC"
14:16 - Checking high voltages...
14:16 - Starting task "Check HV"
14:16 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:16 - Reference voltage of channel 5 in drawer #7: expected 1139.23, read 1136.28
14:16 - Reference voltage of channel 6 in drawer #9: expected 1111.85, read 1193.17
14:16 - Done
14:16 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1275.68 V. Actual voltage is between 968.68 V and 1276.73 V.
14:16 - Maximum difference between reference and actual voltage is 1.63 V
14:16 - Checking status of HVPA module in 12 drawer(s)...
14:16 - Checking status of HVPA channels in 12 drawer(s)...
14:16 - HV is stabilized in all channels.
14:16 - Finished task "Check HV"
14:16 - Resetting NMC
14:16 - Starting task "Configure NMC"
14:16 - Configuring modules with configuration /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:16 - NMC is in state NmcState.Configured and knows of 12 drawer(s)
14:16 - Found 0 PPS errors.
14:16 - Finished task "Configure NMC"
14:16 - Checking high voltages...
14:16 - Starting task "Check HV"
14:16 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:16 - Done
14:16 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1275.68 V. Actual voltage is between 968.68 V and 1277.34 V.
14:16 - Maximum difference between reference and actual voltage is 62.40 V
14:16 - Checking status of HVPA module in 12 drawer(s)...
14:16 - Checking status of HVPA channels in 12 drawer(s)...
14:16 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 1 channel(s)
14:16 - Finished task "Check HV"
14:16 - Checking high voltages...
14:16 - Starting task "Check HV"
14:16 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:16 - Done
14:16 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1275.68 V. Actual voltage is between 968.07 V and 1276.73 V.
14:16 - Maximum difference between reference and actual voltage is 31.90 V
14:16 - Checking status of HVPA module in 12 drawer(s)...
14:16 - Checking status of HVPA channels in 12 drawer(s)...
14:16 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 1 channel(s)
14:16 - Finished task "Check HV"
14:16 - Checking high voltages...
14:16 - Starting task "Check HV"
14:16 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:16 - Done
14:16 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1275.68 V. Actual voltage is between 968.68 V and 1277.34 V.
14:16 - Maximum difference between reference and actual voltage is 9.94 V
14:16 - Checking status of HVPA module in 12 drawer(s)...
14:16 - Checking status of HVPA channels in 12 drawer(s)...
14:16 - HV was locked in 0 channel(s), was in rise default in 0 channel(s) and was still in progress in 1 channel(s)
14:16 - Finished task "Check HV"
14:16 - Checking high voltages...
14:16 - Starting task "Check HV"
14:16 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:16 - Done
14:16 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1275.68 V. Actual voltage is between 968.68 V and 1277.34 V.
14:16 - Maximum difference between reference and actual voltage is 1.66 V
14:16 - Checking status of HVPA module in 12 drawer(s)...
14:16 - Checking status of HVPA channels in 12 drawer(s)...
14:16 - HV is stabilized in all channels.
14:16 - Finished task "Check HV"
14:16 - Starting NMC
14:16 - Clearing PPS error counters
14:16 - Configuring TIB...
14:16 - Setting TIB forced mode to False
14:16 - Writing False to serveur.TIB.Forced.ForcedMode.ForcedMode_v
14:16 - Status: TibState.PpsStopped
14:16 - Alarms: AlarmVector.NoAlarm
14:16 - Writing 0.0 to serveur.TIB.ExternalDelay.ExternalDelay_v
14:16 - Setting TIB trigger mode to 0x1 = TriggerMask.Mono
14:16 - Writing 1 to serveur.TIB.TriggerMode.ModeMask.ModeMask_v
14:16 - Writing 0 to serveur.TIB.InputsEnable.InputMask.InputMask_v
14:16 - Writing False to serveur.TIB.BUSY.DisableBusy.DisableBusy_v
14:16 - Writing 0.0 to serveur.TIB.BUSY.ExtraDelayBusy.ExtraDelayBusy_v
14:16 - Writing False to serveur.TIB.Throttler.DisableThrottlerBP.DisableThrottlerBP_v
14:16 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP50us.MaxTriggersBP50us_v
14:16 - Writing 255 to serveur.TIB.Throttler.MaxTriggersBP1ms.MaxTriggersBP1ms_v
14:16 - Status: TibState.PpsStopped
14:17 - Alarms: AlarmVector.NoAlarm
14:17 - Closing TIB connection to camera server
14:17 - Connecting TIB to camera server at 10.10.0.251:222
14:17 - Starting TIB...
14:17 - Status: TibState.PpsStopped
14:17 - Alarms: AlarmVector.NoAlarm
14:17 - Resetting run
14:17 - Wait for UCTS external trigger before enabling trigger...
14:17 - Status: TibState.Standby
14:17 - Alarms: AlarmVector.NoAlarm
14:17 - Status: TibState.Standby
14:17 - Alarms: AlarmVector.NoAlarm
14:17 - Status: TibState.CoutingPps
14:17 - Alarms: AlarmVector.NoAlarm
14:17 - Starting TIB triggers...
14:17 - Enabling trigger
14:17 - Status: TibState.Running
14:17 - Alarms: AlarmVector.NoAlarm
14:19 - Stopping TIB...
14:19 - Status: TibState.Running
14:19 - Alarms: AlarmVector.NoAlarm
14:19 - Disabling trigger
14:19 - Status: TibState.RunStopped
14:19 - Alarms: AlarmVector.NoAlarm
14:19 - Disabling PPS
14:19 - Status: TibState.PpsStopped
14:19 - Alarms: AlarmVector.NoAlarm
14:19 - Closing TIB connection to camera server
14:19 - Status: TibState.PpsStopped
14:19 - Alarms: AlarmVector.NoAlarm
14:19 - Run duration: 0:02:29
14:19 - Local camera triggers: 0
14:19 - Slow control triggers: 0
14:19 - Single photo-electron triggers: 0
14:19 - Calibration triggers: 0
14:19 - Software triggers from UCTS: 0
14:19 - Auto-pedestal triggers: 967115
14:19 - Collected input triggers: 1539
14:19 - Busy triggers: 0
14:19 - Non-busy triggers sent to UCTS: 1539
14:19 - Camera event triggers sent to clusters: 1539
14:19 - Stopping NMC
14:19 - Found 0 PPS errors.
14:19 - Checking high voltages...
14:19 - Starting task "Check HV"
14:19 - Checking reference voltages against /local/home/cta_test_bench/config/2018/20180314/config_1module_3NN_4pe.NMC.xml
14:19 - Done
14:19 - Found 12 drawer(s). Reference voltage is between 968.11 V and 1275.68 V. Actual voltage is between 968.68 V and 1277.34 V.
14:19 - Maximum difference between reference and actual voltage is 1.66 V
14:19 - Checking status of HVPA module in 12 drawer(s)...
14:19 - Checking status of HVPA channels in 12 drawer(s)...
14:19 - HV is stabilized in all channels.
14:19 - Finished task "Check HV"